选项该内存不能为read错误

1通用BIOS设置Main(主菜单)ROMBIOS包含一个内建的设置程式,允许用户做基本的系统组态以及硬件参数的设置.
改变后的数据储存在靠电池电力维持的CMOSRAM中,所以即使断电数据也可以得到保存,一般来说,保存在CMOSRAM中的信息是不会发生改变的,除非系统组态发生变化,例如硬盘装置更换或者是新硬件的加入.

当然也可能因为CMOS电池电力不足而造成CMOS数据丢失,如果发生这种情况,您需要更换一块新的CMOS电池后重新设置BIOS.
注意:BIOS设置界面和描述仅供参考,并不一定和你在屏幕上看到的画面完全一样.

BIOS内容选项可能会有一些改变,若有不同请以主板实际显示的画面为主.
此项目提供系统基本信息设定:进入设定程序在计算机启动时,BIOS进入开机自检(Post)程序,自检程序是一系列固定在BIOS中的诊断程序,当自检程序执行完成后,如果遇到错误会显示出如下信息:PressDELtoRunSetupPressF1toLoaddefaultvaluesandcontinueddefaultvalue(按F1键即可进入BIOS设置界面,按F2键装载默认值并进入系统).
当自检程序执行完成后,没有遇到错误如果你想进入BIOS,请按DEL键,直到进入BIOS界面.
如果此信息在您做出反应前就消失了,您可以关机后再开机或按机箱上的Reset键,重启您的电脑,也可以同时按下++来重启电脑.
控制键位向前移一项向后移一项向左移一项向右移一项选定此选项改变选择数值主题帮助,仅在状态显示菜单和选择设定菜单有效从CMOS中恢复前次的CMOS设定值,仅在选择设定菜单时有效载入优化缺省值保存改变后的CMOS设定值并退出退出菜单或者从子菜单回到主菜单BIOS设置进入设置程序:开机并且在POST(开机自检)时按下键,就进入BIOSCMOS设置程序05/03/2011BIOSInformationModelNameSUPOXIntelH61SerieCompliencyAMIUEFIx642.
3BuildDateTotalMemory4096MB(DDR31333)SystemLanguageSystemDateSystemTime[English][Thu01/03/2012][16:30:25]Version2.
14.
1219.
Copyright(C)2011AmericanMegatrends,Inc.
Enter:Select+/-:ChangeOpt.
F1:GeneralHelpF3:OptimizedDefaultsF4:Save&ExitESC:ExitAccessLevelAdministrator←→:SelectScreen↑↓:SelectItemSettheTime.
UseTabtoswitchbetweentimeelements.
MainAdvancedChipsetBootSecurityQ-TuneExitAptiosetuputility-Copyright(C)2011AmericanMegatrends,Inc.
主菜单显示了BIOS版本信息.
日期和时间,选择你需要更改的项目,通过按下"↑↓←→"键来移动导航条到您想更改的项目后按下键.
当移动导航条到各个项目时,在屏幕的右上方会显示一条帮助信息以帮助您更好地理解该选项的功能.
当选择了一个选项时,该选项的子菜单就会显示出来,用户就可以调整相应的配置参数.
Advanced(高级属性设置)此项目提供了系统高级进阶功能设定Aptiosetuputility-Copyright(C)2011AmericanMegatrends,Inc.
MainAdvancedChipsetBootSecurityQ-TuneExitPCISubsystemSettingsPCI,PCI-XandPCIExpressSettings.
CPUConfigurationSATAConfigurationThermalConfigurationUSBConfigurationSMARTFANControlH/WMonitorEnter:Select+/-:ChangeOpt.
SuperIOConfiguration←→:SelectScreen↑↓:SelectItemVersion2.
14.
1219.
Copyright(C)2011AmericanMegatrends,Inc.
ACPISettingsF4:Save&ExitESC:ExitF1:GeneralHelpF3:OptimizedDefaults2PCISubsystemSettings(PCI子系统设置)此项目可以调整PCI相关设置PCICommonSettings[Disabled]←→:SelectScreen[Disabled]↑↓:SelectItem[Enabled]Enter:Select[Auto]+/-:ChangeOpt.
[Auto]F1:GeneralHelp[Disabled]PCIExpressDeviceRegisterSettings[Disabled]WARNING:EnablingASPMmaycausesomePCI-EdevicestofailExtendedSynch[Disabled]Aptiosetuputility-Copyright(C)2011AmericanMegatrends,Inc.
AdvancedIncaseofmultipleOptionROMs(LegacyandEFIESC:ExitF3:OptimizedDefaultsF4:Save&ExitASPMSupport[Disabled]PERR#GenerationPCIOptionROMHandlingPCIROMPriority[EFICompatibleROM]PCILatencyTimerVGAPaletteSnoopSERR#GenerationPCIBusDriverVersionV2.
05.
01NoSnoopMaximumPayloadRelaxedOrderingExtendedTagCompatible),specifieswhatPCIOptionROMtolaunch.
[Disabled]MaximumReadRequestPCIExpressLinkSettings[32PCIBusClocks]Version2.
14.
1219.
Copyright(C)2011AmericanMegatrends,Inc.
PCIROMPriority在多个ROM的情况下,允许指定PCI选项ROM启动选项:LegacyROM,EFICompatibleROMPCILatencyTimer该项目设置PCI设备的延迟定时器数值选项:32,64,96,128,160,192,224,248PCIBusClocksVGAPaletteSnoop选择开启或关闭颜色校正功能选项:Enabled,DisabledPERR/SERR#GenerationPERR/SERR生成选项选项:Enabled,DisabledRelaxedOrdering该项目用来开启或关闭PCIExpressdevicerelaxedordering.
选项:Enabled,DisabledExtendedTag该项目用来开启或关闭PCIExpress设备的扩展标签选项:Enabled,DisabledNoSnoop该项目用来开启或关闭PCIExpress设备的侦测选项选项:Enabled,Disabled3MaximumPayload该项目设置PIC-E设备的最大负载值选项:Auto,128、256、512、1024、2048、4096BytesMaximumReadRequest该项目设置PCI-E设备的最大读取值选项:Auto,128、256、512、1024、2048、4096BytesASPMSupport该项目设置ASPM等级.
选项:Disabled,Auto,ForceL0sExtendedSynch该项目用来开启或关闭扩展同步模式的生成.
选项:Enabled,DisabledACPISettings(高级电源管理)此项目提供了电源管理信息设定.
(*该项目部分选项根据不同型号主板存在差异,请根据实际项目选择)ACPISleepStatepressed.
WakesystemwithFixedTime[Disabled][Disabled]Aptiosetuputility-Copyright(C)2011AmericanMegatrends,Inc.
AdvancedACPISettingsSelectthehighestACPIsleepstatethesystemwillenterF4:Save&ExitESC:ExitF1:GeneralHelpF3:OptimizedDefaultsEnter:Select+/-:ChangeOpt.
Version2.
14.
1219.
Copyright(C)2011AmericanMegatrends,Inc.
whentheSUSPENDbuttonis←→:SelectScreen↑↓:SelectItemRing-InwakeupfromS5[Disabled]ACPISleepState[S1(CPUStopClock)]PMEWakeupfromS5选择在OS下的休眠模式选项:Suspend,S1PMEWakeupFromS5该项目开启或禁用在S5状态下通过网络唤醒功能选项:Enabled,DisabledWakesystemwithFixedTime是否打开定时开机功能选项:Enabled,DisabledRing-InWakeupfromS5该项目允许打开或禁用在S5状态下通过Ring唤醒功能选项:Enabled,Disabled4CPUConfiguration(CPU设置)此项目提供了CPU信息和CPU功能设定Hyper-threading启动或关闭HT功能选项:Enabled,DisabledActiveProcessorCores启动或关闭CPU核心(选项视CPU核心数而定)选项:All,1LimitCPUIDMaximum当您欲使用不支持延伸的CPU-ID功能的操作系统时,请将本项目设为[Enabled].
选项:Enabled,Disabled.
ExecuteDisableBit本项目用来启动或关闭No-ExecutionPageProtection技术.
选项:Enabled,Disabled.
IntelvirtualizationtechnologyIntel虚拟化技术控制选项.
选项:Enabled,Disabled5HardwarePrefetcher选择开启或关闭硬体预取功能.
选项:Enabled,Disabled.
AdjacentCacheLinePrefetch高速缓存预读取选项.
用来打开二级高速缓存预读取器.
选项:Enabled,Disabled.
TCCActivationoffsetTCC温度设置PrimaryPlaneCurrentValue初级阶段电流值设置SecondaryPlaneCurrentValue次级阶段电流值设置SATAConfiguration(SATA设备设置)此项目可以查看SATA设备信息以及相关设置Aptiosetuputility-Copyright(C)2011AmericanMegatrends,Inc.
Advanced(1)IDEModeSATAPort1:NotPresentSoftwarePreserveUnknownSATAPort2:NotPresentSATAModeSelection[IDE]SATAPort5:NotPresent+/-:ChangeOpt.
SoftwarePreserveUnknownF1:GeneralHelp←→:SelectScreenSATAPort4:TSSTcorpDVD-RO↑↓:SelectItemSoftwarePreserveN/AEnter:SelectSoftwarePreserveSUPPORTEDESC:ExitVersion2.
14.
1219.
Copyright(C)2011AmericanMegatrends,Inc.
SATAPort6:NotPresentF3:OptimizedDefaultsSoftwarePreserveUnknownF4:Save&ExitSATAController(s)[Enabled]SoftwarePreserveUnknownSATAPort3:ST31000528AS(1000.
2GB)SATAController(s)SATA接口的打开与关闭控制项选项:Disabled,EnhancedSATAModeSATA上的设备工作模式选项:IDE,AHCI,RAID6USBConfiguration(USB设置)进入该项目可以进行USB相关设置USBhardwaredelaysandtime-outs:Aptiosetuputility-Copyright(C)2011AmericanMegatrends,Inc.
AdvancedUSBConfigurationEnablesLegacyUSBsupport.
AUTOoptiondisableslegacyUSBDevices:supportifnoUSBdevicesare2HubsLegacyUSBSupportPort60/64Emulation[Enabled]F3:OptimizedDefaultsF4:Save&Exit←→:SelectScreenUSBtransfertime-out[20sec]↑↓:SelectItemDeviceresettime-out[20sec]Enter:SelectDevicepower-updelay[Auto]+/-:ChangeOpt.
Version2.
14.
1219.
Copyright(C)2011AmericanMegatrends,Inc.
ESC:ExitEHCIHand-off[Enabled][Disabled]connected.
DISABLEoptionwillkeepUSBdevicesavailableonlyforEFIapplications.
F1:GeneralHelpLegacyUSBSupport本项目用来启动或关闭DOS下USB设备功能选项:Enabled,Disabled,AutoEHCIHand-off该项目允许您开启不具备EHCIHand-Off功能的操作系统选项:Enabled,DisabledPort60/64EmulationUSB60/64端口的仿真设置.
当启用此功能时,系统能更好的支持USB键盘设备选项:Enabled,DisabledUSBtransfertime-outUSB传输超时值设置选项:1,5,10,20secDeviceresettime-outUSB命令超时设置选项:10,20,30,40secDevicepower-updelayUSB启动延迟设置选项:Auto,ManualSMARTFANControl(智能风扇控制)进入该项目可以进行智能风扇相关设置7Aptiosetuputility-Copyright(C)2011AmericanMegatrends,Inc.
AdvancedSMARTFANControlCPUFANSmartcontrolfunction.
[Disabled]:FullONCPUSmartFAN[Disabled][Auto]:Byparametersbelow.
CPUFANCalibrateControlMode[Manual]FANCtrlOFF(℃)10F1:GeneralHelpFANCtrlON(℃)20FANCtrlStartValue50FANCtrlSensitive30←→:SelectScreen↑↓:SelectItemVersion2.
14.
1219.
Copyright(C)2011AmericanMegatrends,Inc.
F3:OptimizedDefaultsF4:Save&ExitESC:ExitEnter:Select+/-:ChangeOpt.
CPUSmartFANCPU风扇智能模式控制,当使用Auto时才可进一步控制.
选项:Auto,DisabledControlMode该项目可以设置风扇转速模式.
8;::选项:Quiet,Aggressive,Manual(1)Quiet:风扇以安静模式运转(2)Aggressive:风扇以全速模式运转(3)Manual:启用手动设置模式(当使用该模式时,可对以下选项进行控制)FANCtrlOFF(℃):风扇停止加速运转温度FANCtrlON(℃):风扇开始加速运转温度FANCtrlStartValue:当达到设定值时风扇开始全速运转FANCtrlSensitive:数值越大,风扇转速越高例如:你设定FANCtrlOFF为10度,FANCtrlON为:20,FANCtrlStartValue为50,FANCtrlSensitive为30.
那么,当CPU温度为10度时,风扇便会以低速运转,当温度达到20度时,风扇将会根据已设定的值运转,当温度达到50度时,风扇便会全速运转.
H/WMonitor(硬件监控设置)Systemtemperature:21℃CPUFanSpeed:2973RPMCHA1FanSpeed:N/ACHA2FanSpeed:N/ACPUVcore:+0.
984V:+1.
596V←→:SelectScreen+12V:+11.
837V↑↓:SelectItem+5V:+5.
057VEnter:Select:+1.
056V+/-:ChangeOpt.
IGDVoltage:N/AF1:GeneralHelpVccIO:+1.
056VF3:OptimizedDefaultsF4:Save&ExitESC:ExitCPUtemperature:34℃Version2.
14.
1219.
Copyright(C)2011AmericanMegatrends,Inc.
ShutDownTemperature[Disabled]DRAMVoltagePCHVoltageAptiosetuputility-Copyright(C)2011AmericanMegatrends,Inc.
AdvancedPCHealthStatusShutDownTemperatureShutDownTemperature自动关机温度设置,当CPU到达设定温度值时便会自动关机选项:Disabled(Default)/70℃/158℉/75℃/167℉/80℃/176℉/85℃/185℉/90℃/194℉System/CPUtemperature系统/CPU温度CHA1/2/CPUFanSpeed系统1/2/CPU风扇等转速DRAM/CPUVoltage显示内存/CPU电压值+12V/+5V显示+12V/+5V电压侦测值PCHVoltage显示PCH电压侦测值IGDVoltage显示视频控制器电压侦测值VccIO显示VccIO电压侦测值9SuperIOConfiguration(I/O设置)SuperIOConfigurationSetParametersofSerialPort0(COMA)SuperIOChipIT8728RestoreACPowerLoss[Poweroff]←→:SelectScreen↑↓:SelectItemEnter:Select+/-:ChangeOpt.
F1:GeneralHelpAdvancedAptiosetuputility-Copyright(C)2011AmericanMegatrends,Inc.
Version2.
14.
1219.
Copyright(C)2011AmericanMegatrends,Inc.
F3:OptimizedDefaultsF4:Save&ExitESC:ExitRestoreACPowerLoss该项目设定当系统突然断电时或有中断发生而关机后,再一次加电后的系统状态.

选项:PowerOff,PowerOn,LastStateChipset(芯片组属性设置)进入此项目可对芯片组设置进行调整Version2.
14.
1219.
Copyright(C)2011AmericanMegatrends,Inc.
F4:Save&Exit↑↓:SelectItem+/-:ChangeOpt.
←→:SelectScreenESC:ExitAptiosetuputility-Copyright(C)2011AmericanMegatrends,Inc.
ChipsetNorthBridgeSouthBridgeParametersSouthBridgeF1:GeneralHelpF3:OptimizedDefaultsEnter:Select10NorthBridge(NorthBridge设置)[64M][Enabled][DVMTMode]←→:SelectScreenAptiosetuputility-Copyright(C)2011AmericanMegatrends,Inc.
ChipsetNumberofcorestoenableinTotalMemory4096MB(DDR31333)eachprocessorpackage.
InitateGraphicAdapter[PEG/IGD]IGDMemoryRenderStandbyIGDMulti-Monitor[Disabled]Enter:SelectDDR3_A12048MB(DDR31333)VT-d[Disabled]DDR3_B12048MB(DDR31333)LowMMIOAlign[1024M]+/-:ChangeOpt.
DVMTModeSelectDetectNon-ComplianceDevice[Enabled]F4:Save&ExitESC:ExitPCIExpressPort[Auto]F1:GeneralHelpPEGForceGen1[Disabled]F3:OptimizedDefaultsDVMT/FIXEDMemory[256MB]↑↓:SelectItemLowMMIOAlign此选项关系到4GB以下CPUmemory地址空间的利用.
如是选64M,则在DRAM地址(4GB以内)以上,任一个64MB段开始PCIE/PCI的MMIO映射;如是选1024M,则在任一个1GB段开始PCIE/PCI的MMIO映射选项:64M,1024MVT-d启用或关闭VT-d技术选项:Disabled,Enable.
InitateGraphicAdapter此选项用于选择优先使用显示输出类型选项:IGD,PCI/IGD,PEG/IGD.
IGDMemory板载共享显存设置选项:Disabled,32M,64M,128M.
RenderStandby启用或关闭RenderStandby选项:Disabled,Enable.
DVMTModeSelect物理内存模式设置选项:DVMTMode,FixedMode11DVMT/FIXEDMemory.
共享物理内存选项:128M,256M,MAX.
PCIExpressPort设置开启PCI-E端口选项:Auto,Enable.
PEGForceGen1开启选项:Disabled,Enable.
DetectNon-ComplianceDevice选项:Disabled,Enable.
SouthBridge(SouthBridge设置)[Auto]Aptiosetuputility-Copyright(C)2011AmericanMegatrends,Inc.
ChipsetAudioConfigurationConfigAudioSettings.
MEVersion7.
0.
4.
1197HighPrecisionTimer[Enabled]←→:SelectScreen↑↓:SelectItemAzaliaHDAudio[Enabled]AzaliainternalHDMIcodecF1:GeneralHelpF3:OptimizedDefaultsPCIExpressPortsConfigurationEnter:SelectUSBConfiguration+/-:ChangeOpt.
Version2.
14.
1219.
Copyright(C)2011AmericanMegatrends,Inc.
HighPrecisionEventTimerConfigurationF4:Save&ExitESC:ExitAzaliaHDAudioAzalia高保真声卡控制选项选项:Disabled,Enable.
AzaliaInternalHDMICodecHDMI音效控制选项选项:Disabled,Enable.
HighPrecisionTimer启用或关闭高精密时间计时器选项:Disabled,Enable.
PCIExpressConfiguration进入可以看到以下界面12LaunchPXEOpROMOnboardPCIELAN[Auto]Aptiosetuputility-Copyright(C)2011AmericanMegatrends,Inc.
ChipsetPCIExpressPortsConfigurationLaunchPXEOpROMLANOMACID=00-E0-4C-68-00-0ALegacyOpROMSupportESC:ExitVersion2.
14.
1219.
Copyright(C)2011AmericanMegatrends,Inc.
LaunchStorageOpROMF3:OptimizedDefaultsF4:Save&Exit+/-:ChangeOpt.
PCISubDecode[Enabled]F1:GeneralHelp←→:SelectScreenOnboardPCIBridge[Auto]↑↓:SelectItemPCIExpressPortx1[Auto]Enter:Select[Enabled][Enabled]LaunchPXEOpROMPXE启动模式选择选项:Disabled,OnboardLanPXE,OnboardLanDOLLaunchStorageOpROM启动或关闭储存设备启动选项选项:Disabled,EnabledOnboardPCIELAN板载网卡控制设置选项:Auto,Enabled,DisabledOnboardPCIBridge板载PCI控制选项:Auto,Enabled,DisabledPCIExpressPortx1选项:Auto,Enabled,DisabledPCISubDecode选项:Enabled,Disabled进入USBConfiguration对USBEHCI控制项(必须有一个要开启)进行设置选项:Enabled,Disabled.
13Boot(启动管理设置))07.
68←→:SelectScreen↑↓:SelectItemEnter:Select+/-:ChangeOpt.
F1:GeneralHelpNetworkDeviceBBSPrioritiesF3:OptimizedDefaultsHardDriveBBSPrioritiesF4:Save&ExitESC:ExitFastBoot[Disabled]CSM16ModuleVerison[SATA:TSSTcorpCDD.
.
.
]Interrupt19Capture[Disabled]CSMSupport[Enabled]GateA20Active[UponRequest]OptionROMMessagesFullLogoScreenDisplay[Enabled][ForceBIOS]Aptiosetuputility-Copyright(C)2011AmericanMegatrends,Inc.
BootBootConfigurationSelectthekeyboardNumLockSetupPromptTimeout2StateBootupNumLockState[On]BootSuccessBeep[Enabled]Version2.
14.
1219.
Copyright(C)2011AmericanMegatrends,Inc.
BootOptionPrioritiesBootOption#1BootOption#3[SATA:ST3160812AS.
.
.
][RealtekPXEB01D00]BootOption#2CD/DVDROMDriveBBSPrioritiesSetupPromptTimeout该选项设置进BIOS设置提示信息的长短.
BootupNumlockState该选项设置小键盘的开关状态.
FullLogoScreenDisplay是否启用开机Logo图片功能选项:Enabled,DisabledFastBoot该选项设置开机初始化GateA20Active当设为"UponRequest",可以使用BIOS来关闭GA20,设为"Always"时,不允许关闭GA20.
选项:UponRequest,Always.
OptionROMMessages选择OptionROM的信息显示方式.
选项:ForceBIOS,KeepCurrent.
Interrupt19Capture捕获中断19的信息选项:Disabled,Enable14CSMSupportCSM控制设置选项:Enabled,DisabledBootSuccessBeep打开或关闭开机提示音选项:Enabled,DisabledBootOption#1/#2/#3该项允许选择优先引导设备,显示在屏幕上的设备种类取决于系统所安装的设备种类NetworkDevice/HardDrive/CDDVDROMDriveBBSPriorities该项允许选择设备的顺序,显示在屏幕上的设备种类取决于系统所安装的设备种类Security(密码设定)15AdministratorPassword设置管理员密码UserPassword设置使用者密码BIOSWriteProtectionBIOS写保护选项选项:Enabled,DisabledQ-TuneBIOS(超频功能设置)该选项页允许您调整多种参数以获得更好的超频性能.
警告:超频需要专业知识并且冒着对系统组件造成永久损坏的风险,我们建议您保留这些参数的默认值.
AdministratorPasswordEnter:Select+/-:ChangeOpt.
[Enabled]F1:GeneralHelpF3:OptimizedDefaultsonlyaskedforwhenenteringSetup.
thenthisonlylimitsaccesstoSetupandisIfOnlytheUser`spasswordisset,thenthisisapoweronpasswordandmustbeenteredtobootorenterSetup.
InSetuptheUserwillhaveAdministratorrights.
Thepasswordmustbe3to20characterslong.
IfONLYtheAdministrator`spasswordisset,Aptiosetuputility-Copyright(C)2011AmericanMegatrends,Inc.
SecurityPasswordDescriptionSetAdministratorPasswordVersion2.
14.
1219.
Copyright(C)2011AmericanMegatrends,Inc.
←→:SelectScreenHDDSecurityConfiguration:F4:Save&ExitHDD0:ST31000528ASESC:Exit↑↓:SelectItemUserPasswordBIOSWriteProtectionStartPage指定BIOS开始界面选项:Page-Main/Advanced/Chipset/Boot/Security/Q-Tune/Save&Exit[Enabled][Disabled]240[Enabled][Enabled][BySPD]9↑↓:SelectItemEnter:Select+/-:ChangeOpt.
F1:GeneralHelpF3:OptimizedDefaultsF4:Save&ExitESC:ExitwhenyouenterUEFIBIOSSetupStartPage[Page-Main]afteroverclockingQuick3Setup[Normal]Normal:PowerSaving:LowestPowerConsumptionSettingTheoptimaldefaultssettingAptiosetuputility-Copyright(C)2011AmericanMegatrends,Inc.
Q-TuneYoucansettheentrancepageNotice:PleaseClearCMOSifsystemnodisplayRowRefreshCycleTime(tRFC)107RAS#toCAS#Delay(tRCD)9RAS#ActiveTime(tRAS)24WriteRecoveryTime(tWTR)10IACortCurrentMax(1/8Amp)896PCHVoltage[Auto]CPUVcore[Auto]IGDVcore[Auto]DRAMVoltage[Auto]←→:SelectScreenVCCSA[Auto]DDR3_DIMM1InformationVCCIO[Auto]9DDR3_DIMM2InforMationVersion2.
14.
1219.
Copyright(C)2011AmericanMegatrends,Inc.
Quick3HotkeyFixedCPURatioCPURatioHostClockOverride(1/100MHz)EnhancedIntelSpeedStepTechnologyCPUC1EMemoryMultiplierConfigurationDRAMTimingControlCAS#Latency(tCL)====DDR3MemoryInsight====DDR3_DIMM3InforMationDDR3_DIMM4InforMationModuleSPECTiming999241010755525ReadCAS#Precharege(tRTP)525FourActiveWindowDelay(tFAW)WritetoReadDelay(tWTR)5ActivetoActiveDelay(tRRD)5====ManualVoltagesystem====RowPrechargeTime(tRP)1617Quick3SetupQuick3设置选项:Normal,PowerSavingQuick3HotkeyQuick3快捷键启用设置选项:Enabled,DisabledFixedCPURatioCPU倍频选项,选择Enabled可以对CPU进行倍频调节选项:Enabled,DisabledCPURatioCPU倍频调节选项HostClockOverride(1/100MHz)主频率设置调节选项IACoreCurrentMax(1/8Amp)IA核心最大电流值EnhancedIntelSpeedstepTechnology启用或关闭EIST功能CPUC1E启用或关闭CPU节能功能DRAMTimingControl该项允许手动/自动调节DRAM时序.
选项:BySPD,Manual,XMPProfile1PCHVoltagePCH电压调节CPUVCoreCPU电压调节IGDVoltage显示视频控制器电压调节DRAMVoltage内存电压调节VccSA/IOCPU高频率SA/IO电压调节选项:Auto,Default,+3.
3%,+6.
6%,+10%DDR3_DIMM1~4InformationDDR3内存信息备注:超频失败将导致系统无法显示的问题,要解这个问题要先断电,清空CMOS,使BIOS恢复到默认值或者是最初设定值.
Save&Exit(退出菜单)此项目提供离开BIOS设定程序以及出厂默认值还原等功能.
ESC:ExitVersion2.
14.
1219.
Copyright(C)2011AmericanMegatrends,Inc.
F3:OptimizedDefaultsF4:Save&ExitF1:GeneralHelp↑↓:SelectItemEnter:SelectLaunchEFIShellfromfilesystemdevice+/-:ChangeOpt.
RealtekPXEB05D00SATAPS:ST31000528AS←→:SelectScreenAptiosetuputility-Copyright(C)2011AmericanMegatrends,Inc.
Save&ExitDiscardChangesandExitExitsystemsetupwithoutSaveChangesandResetsavinganychanges.
SATASS:TSSTcorpDVD-ROMTS-HRestoreDefaultsBootOverrideDiscardChangesandExit放弃设置并且推出.
如果您不希望保存当前设定值,可以选择此项目退出.