配置h3c路由器配置命令

H3CMSR系列路由器产品开局指导书Copyright2014杭州华三通信技术有限公司版权所有,保留一切权利.
非经本公司书面许可,任何单位和个人不得擅自摘抄、复制本文档内容的部分或全部,并不得以任何形式传播.
本文档中的信息可能变动,恕不另行通知.
i目录1产品概述·························································································································11.
1产品特点······················································································································11.
2Console方式管理··········································································································11.
3Telnet方式管理·············································································································21.
3.
1组网图:·············································································································21.
3.
2配置步骤:··········································································································31.
4Web方式管理···············································································································31.
4.
1组网图················································································································41.
4.
2配置步骤·············································································································42License注册申请··············································································································52.
1License添加步骤···········································································································511产品概述H3CMSR系列路由器是杭州华三通信技术有限公司(以下简称H3C公司)自主研发、面向企业级网络的产品.
根据网络规模的不同,MSR系列路由器既可以在中小型企业网中担当核心路由器,也可以在大的企业中担当分支网络的接入路由器.
MSR系列路由器采用模块化结构,提供了多种可选配的接口卡和接口模块.
1.
2Console方式管理MSR系列路由器可以通过面板上的CONSOLE口登陆设备并通过命令行完成管理,MSR系列路由器的绝大部分功能项都能通过命令行完成配置.
推荐使用命令行方式进行配置.
使用串口线连接MSRConsole口.
配置串口属性*Copyright(c)2004-2014HangzhouH3CTech.
Co.
,Ltd.
Allrightsreserved.
**Withouttheowner'spriorwrittenconsent,**nodecompilingorreverse-engineeringshallbeallowed.
*2displayversionH3CComwarePlatformSoftwareComwareSoftware,Version5.
20,Release2514P12Copyright(c)2004-2015HangzhouH3CTech.
Co.
,Ltd.
Allrightsreserved.
H3CMSR30-11Fuptimeis0week,0day,0hour,1minuteLastreboot2007/01/0100:01:35SystemreturnedtoROMByCommand.
CPUtype:FREESCALEMPC8323E333MHz256MbytesDDR2SDRAMMemory256MbytesFlashMemoryPcbVersion:3.
0LogicVersion:1.
0BasicBootROMVersion:5.
02ExtendedBootROMVersion:5.
02[SLOT0]AUX(Hardware)3.
0(Driver)1.
0,(Cpld)1.
0[SLOT0]ETH0/0(Hardware)3.
0(Driver)1.
0,(Cpld)1.
0[SLOT0]ETH0/1(Hardware)3.
0(Driver)1.
0,(Cpld)1.
0[SLOT0]48FSW(Hardware)3.
0(Driver)1.
0,(Cpld)1.
0[SLOT0]CELLULAR0/0(Hardware)3.
0(Driver)1.
0,(Cpld)1.
0[SLOT1]SIC-1E1-F(Hardware)1.
0(Driver)1.
0,(Cpld)1.
01.
3Telnet方式管理通过console登陆设备开启telnet服务,配置telnet用户.
1.
3.
1组网图:31.
3.
2配置步骤:#通过Console配置MSR,保证PC和MSR能相互ping通,用做远程登陆.
system-view#开启telnet服务[H3C]telnetserverenable[H3C]interfaceEthernet0/0#配置E0/0接口的IP地址为192.
168.
1.
2,子网掩码为255.
255.
255.
0.
[H3C-Ethernet0/0]ipadd192.
168.
1.
224[H3C-Ethernet0/0]quit#配置telnet用户名为admin,认证口令为admin,用户级别为3级.
[MSR]local-useradmin[MSR-luser-admin]service-typetelnet[MSR-luser-admin]authorization-attributelevel3[MSR-luser-admin]passwordsimpleadmin#配置VTY的认证模式为scheme.
[MSR]user-interfacevty04[MSR-line-vty0-4]authentication-modescheme配置PC的IP地址,并与MSR互通,使用telnet客户端就可以登陆MSR并配置了.
1.
4Web方式管理MSR出厂时已经设置默认的Web登录信息,用户可以直接使用该默认信息登录MSR的Web界面.
默认的Web登录信息包括:用户名:"admin"4密码:"admin"设备的IP地址:"192.
168.
1.
11.
4.
1组网图1.
4.
2配置步骤采用Web方式设备的步骤如下:(1)连接设备和PC用交叉以太网线将PC和设备的以太网口Ethernet0/0相连.
(2)为PC配置IP地址,保证能与设备互通修改IP地址为192.
168.
1.
0/24网段内的任意地址(除192.
168.
1.
1),例如192.
168.
1.
2.
(3)启动浏览器,输入登录信息在PC上启动浏览器,在地址栏中输入"http://192.
168.
1.
1"后回车,即可进入设备的Web登录页面,如图1-2所示.
输入用户名"admin"、密码"admin"和验证码,选择Web网管的语言种类(目前支持中文和English两种),单击按钮即可登录.
Web网管登录页面:52License注册申请MSR系列路由器分为Bi/Si两种版本:Bi指Basic,基本软件版本,功能有所削减,可以免费使用,不需要也不能注册Lisence;Si指Standard,标准软件版本,具备完整的功能,通常需要购买Lisence并注册,否则设备运行一月后重启,之后每隔30分钟重启一次;不区分BI/SI版本的设备,可以直接使用.
2.
1License添加步骤SI设备输入授权函上的信息即可:License添加命令命令行格式:licenseregisterserial-numberserial-number:软件的序列号.
格式为XXXXX-XXXXX-XXXXX-XXXXX-XXXXX-XXXXX-XXXXX,其中,X表示一个序列号字符,该字符可以是字母(区分大小写)、数字、加号(+)或右斜线(/).
License显示命令命令行格式:displaylicense