正常运行ip地址冲突

Sheet1"日志标题","日志模块","日志名称","日志级别","日志信息","日志含义","日志参数","可能原因","处理步骤""AAA/6/TAC_ATTRIBUTECHANGE_SUCCESS","AAA","TAC_ATTRIBUTECHANGE_SUCCESS","6","Userattributehasbeenchanged.
(Attribute=password,OperatorName=[STRING],OperatorIPAddress=[STRING],UserName=[STRING],ServerIPAddress=[STRING],VPNName=[STRING])","用户属性被修改.
","Attribute:用户属性,这里是密码.
OperatorName:操作者名称.
OperatorIPAddress:操作者地址.
UserName:被修改的用户名称.
ServerIPAddress:HWTACACS服务器的IP地址.
VPNName:用户所属VPN实例名称,如果用户在公网,可能为空.
","HWTACACS用户登录设备后,执行命令hwtacacs-userchange-passwordhwtacacs-servertemplate-name修改用户属性成功.
","1.
正常运行信息,无需处理.
""AAA/6/TAC_ATTRIBUTECHANGE_FAIL","AAA","TAC_ATTRIBUTECHANGE_FAIL","6","Failedtochangeuserattribute.
(Attribute=password,OperatorName=[STRING],OperatorIPAddress=[STRING],UserName=[STRING],ServerIPaddress=[STRING],VPNName=[STRING])","修改用户属性失败.
","Attribute:用户属性,这里是密码.
OperatorName:操作者名称.
OperatorIPAddress:操作者地址.
UserName:被修改的用户名称.
ServerIPAddress:HWTACACS服务器的IP地址.
VPNName:用户所属VPN实例名称,如果用户在公网,可能为空.
","HWTACACS用户登录设备后,修改用户属性失败.
","1.
重新执行命令hwtacacs-userchange-passwordhwtacacs-servertemplate-name,并且输入正确的信息.
""AAPT/4/CONNECT_OK","AAPT","CONNECT_OK","4","Sandbox[sandbox-name]wasconnected.
","连接沙箱成功.
","sandbox-name:沙箱名称.
","NIP与沙箱连接成功.
","1.
正常运行信息,无需处理.
""AAPT/4/CONNECT_FAIL","AAPT","CONNECT_FAIL","4","Failedtoconnecttosandbox[sandbox-name].
","连接沙箱失败.
","sandbox-name:沙箱名称.
","NIP与沙箱连接异常中断.
","1.
检查NIP与沙箱之间的连接.
""AAPT/4/SCAN_RESULT","AAPT","SCAN_RESULT","4","Sandboxscan-result.
(SyslogId=[syslog-id],VSys=[vsys-name],Policy=[policy-name],SrcIp=[source-ip],DstIp=[destination-ip],SrcPort=[source-port],DstPort=[destination-port],SrcZone=[source-zone],DstZone=[destination-zone],User=[user-name],Protocol=[protocol],Application=[application-name],Profile=[profile-name],FileName=[file-name],Type=[file-type],Size=[file-size],Direction=[direction],SandboxType=[sandbox-type],SubTime=[time],ScanResult=[file-scan-result],RiskLevel=[risk-level],Hash=[file-hash-value])","沙箱的扫描结果.
","syslog-id:日志序号.
vsys-name:虚拟系统名称.
policy-name:安全策略名称.
source-ip:源IP地址.
destination-ip:目的IP地址.
source-port:源端口.
destination-port:目的端口.
source-zone:源安全区域.
destination-zone:目的安全区域.
user-name:用户名.
protocol:协议名称.
application-name:应用名称.
profile-name:配置文件名称.
file-name:文件名称.
file-type:文件类型.
file-size:文件大小.
direction:流量传播方向.
sandbox-type:沙箱类型,本地沙箱或云沙箱.
time:样本提交时间.
file-scan-result:样本扫描结果,恶意或可疑.
risk-level:威胁等级.
包括high-risk、middle-risk、low-risk,分别对应高危、中危、低危三个等级.
file-hash-value:文件哈希值.
","当报文命中APT防御配置文件后,会进行未知文件还原,还原后的文件通过配置的沙箱类型会提交到相应的沙箱(本地沙箱或云沙箱)进行检测,当沙箱检测的结果为恶意或者可疑时会报该日志.

","1.
正常运行信息,无需处理.
""ACL/4/CONFGCNFLCT","ACL","CONFGCNFLCT","4","AnACLgroupnumberconflictoccurredwhentheconfigurationfilewasbeingread.
(GroupNumber=[ULONG])","正在读配置文件,ACL组号冲突.
","GroupNumber:组号","正在读配置文件,ACL组号冲突.
","1.
修改配置,更改起冲突的ACL6组号.
""ACL/4/RULECNFLCT","ACL","RULECNFLCT","4","AnACLruleconflictoccurredwhentheconfigurationfilewasbeingread.
(RuleNumber=[ULONG])","读配置文件时,ACL规则组下的规则号存在多条,导致冲突.
","RuleNumber:规则号","读配置文件时,ACL规则组下的规则使用同一规则号,导致冲突.
","1.
修改配置,更改规则号.
""ACL6/2/GET_CFG_FAIL","ACL6","GET_CFG_FAIL","2","FailedtogenerateACL6configurationsbecauseofinsufficientmemoryresources.
","内存不足,导致ACL6配置无法保存.
","无:无","内存不足.
","1.
关注内存使用情况,降低内存使用量.
""ACL6/3/RPC_FAILED","ACL6","RPC_FAILED","3","FailedtosynchronizeACL6configurations.
(ErrorCode=[ULONG])","ACL6配置下发失败.
","ULONG:错误码","设备正忙.
","1.
请稍后重试.
""ACL6/3/INIT_ERR","ACL6","INIT_ERR","3","TheACL6componentfailedtobeinitialized.
Restartthedeviceandre-initializetheACL6component.
","某种错误导致ACL6组件没有被初始化.
","无:无","设备启动异常,可能是内存不足.
","1.
重启设备,重新初始化ACL6组件.
""ACLPDT/4/ACLRULENUMTOOMUCH","ACLPDT","ACLRULENUMTOOMUCH","4","TheACLrulenumberhasreachedtheupperlimit.
(ErrorCode=[ULONG])","此ACL视图下的规则数量超出规格,配置失败.
","ULONG:错误码.
","此ACL视图下的规则数量超出规格,配置失败.
","1.
在此ACL视图下,去使能部分规则或在系统视图下,创建新的ACL后再进行配置.
""ACLPDT/4/ADDRULEERROR","ACLPDT","ADDRULEERROR","4","TheACLgrouptypeisnotintherange.
(ErrorFunction=[STRING],ErrorCode=[ULONG])","ACL组类型不存在,配置失败.
","STRING:函数标识.
ULONG:错误码.
","ACL组类型不存在,配置失败.
","1.
配置ACL组的类型在指定范围内.
""ACLPDT/4/CONFGCNFLCT","ACLPDT","CONFGCNFLCT","4","Failedtorecover[acl-command]becauseoftherecoveryofthegroup.
","规则组已被恢复过.
","acl-command:acl命令行.
","规则组已被恢复.
","1.
关注该命令行是否配置成功.
""ACLPDT/4/DELTNODEFAIL","ACLPDT","DELTNODEFAIL","4","Failedtodelete[string]becausetherulenodedoesnotexist.
","该配置不存在,删除失败.
","string:规则节点命令行.
","该配置不存在,删除失败.
","1.
配置不存在,无需删除.
""ACLPDT/4/HAFAIL","ACLPDT","HAFAIL","4","Hotbackupisinprocess.
(ErrorFunction=[STRING],ErrorCode=[ULONG])","设备正在热备份,不能进行配置,请稍后再试.
","STRING:函数标识.
ULONG:错误码.
","设备正在热备份,不能进行配置.
","1.
热备份结束后再进行配置.
""ACLPDT/4/MALLOCNODEFAIL","ACLPDT","MALLOCNODEFAIL","4","FailedtocreateanACLruleduetoinsufficientmemoryresources.
(ErrorFunction=[STRING],ErrorCode=[ULONG])","创建ACL规则时,内存不足导致创建失败.
","STRING:函数标识.
ULONG:错误码.
","创建ACL规则时,内存不足.
","1.
稍后重试.
""ACLPDT/4/RULETOOLARGE","ACLPDT","RULETOOLARGE","4","Failedtoconfigure[string]becausetherulecontainsmorethan256characters.
","规则名称过长,不允许配置.
","string:命令行.
","规则名称过长,不允许配置","1.
配置的名称长度不超过256个字符.
""ARP/4/ARP_DUPLICATE_IPADDR","ARP","ARP_DUPLICATE_IPADDR","4","ReceivedanARPpacketwithaduplicateIPaddressfromtheinterface.
(IpAddress=[IPADDR],InterfaceName=[STRING1],MacAddress=[STRING2])","从接口上接收到IP地址冲突的ARP报文.
","IPADDR:冲突的IP地址.
STRING1:接口名称.
STRING2:MAC地址.
","原因1:网络上存在源IP地址与接口IP地址相同的设备.
原因2:网络上存在恶意攻击.
原因3:配置了NATServer或者NAT地址池地址与接口IP地址冲突.
","1.
检查网络中是否存在与接口相同的IP地址,修改接口IP地址或与之冲突的设备的IP地址,确保两者IP地址不一致.
2.
检查网络中是否存在恶意攻击.
如果修改接口IP地址多次后,设备仍打印此日志,且日志提示相同的源MAC地址,此情况可判定为网络中存在恶意攻击.
此时,可启用ARP欺骗攻击防御.
3.
检查NATServer和NAT地址池的配置,修改NATServer公网地址或者NAT地址池地址,确保与接口IP地址不一致.
""ARP/4/ARP_LOG_DUPLICATE_IPADDR_DETECT","ARP","ARP_LOG_DUPLICATE_IPADDR_DETECT","4","DetectedanIPaddresscollision.
(IpAddress=[IpAddress],LocalMacAddress=[LocalMacAddress],LocalInterfaceName=[LocalInterfaceName],LocalVlanId=[LocalVlanId],ReceiveMacAddress=[ReceiveMacAddress],ReceiveInterfaceName=[ReceiveInterfaceName],ReceiveVlanId=[ReceiveVlanId])","设备检测到IP地址冲突.
","IpAddress:冲突的IP地址.
LocalMacAddress:本地ARP表项的MAC地址.
LocalInterfaceName:本地ARP表项中记录的接口名称.
LocalVlanId:本地ARP表项中记录的VLANID.
ReceiveMacAddress:接收到的ARP报文中的MAC地址.
ReceiveInterfaceName:接收到的ARP报文的接口名称.
ReceiveVlanId:接收到的ARP报文的VLANID.
","设备收到非免费ARP报文时,发现本端已经保存了该报文中的IP地址对应的ARP表项,但是该ARP表项的MAC地址和ARP报文中的源MAC地址不同.
","1.
执行displayarpip-conflicttrack命令,检查网络中是否存在IP地址配置冲突.
·Y=>2·N=>32.
请用户根据自身需求,修改网络中相关设备的IP地址,并确认是否还会产生该日志.
·Y=>3·N=>43.
请联系华为技术支持工程师.
4.
结束.
""ARP/6/ARPIGNORETC","ARP","ARPIGNORETC","6","Theuserchooses[Y/N]whendecidingwhethertoignoretopologychange.
","当决定是否忽略拓扑变化时,用户选择了[Y/N].
","[Y/N]:当决定是否忽略拓扑变化时,用户选择了是或否.
","在系统视图下执行命令arptopology-changedisable时,用户需要决定是否忽略拓扑变化.
","1.
检查拓扑变化后,ARP表项是否更新.
""ARP/6/ARP_LOG_BROADCAST_DISABLE","ARP","ARP_LOG_BROADCAST_DISABLE","6","Theuserchooses[Y/N]whendecidingwhethertodisablethesendingofARPbroadcastpackets.
","当决定是否去使能ARP报文广播发送时,用户选择了[Y/N].
","[Y/N]:确认是否去使能ARP报文广播发送时,用户输入的字符.
","执行去使能ARP报文广播发送的命令时,输出提示信息请用户确认是否继续,并记录用户的确认结果.
","1.
正常运行信息,无需处理.
""ARP/6/ARP_LOG_CONFIRM","ARP","ARP_LOG_CONFIRM","6","Theuserchose[Y/N]whendecidingwhethertoexecutethecommand"[command]".
","当决定是否执行交互式命令时,用户选择了[Y/N].
","[Y/N]:确认是否执行交互式命令时,用户输入的字符.
[command]:需要确认是否执行的交互式命令.
","执行ARP扫描或者ARP固化等交互式命令时,输出提示信息请用户确认是否继续,并记录用户的确认结果.
","1.
正常运行信息,无需处理.
""ARP/6/RSTARPALL","ARP","RSTARPALL","6","Theuserchooses[operation-type]whendecidingwhethertoresetarpall.
","提示用户是否确认删除所有ARP表项.
","[operation-type]:用户选择的操作类型.
","执行命令前需要用户确认.
","1.
正常运行信息,无需处理.
""ARP/6/RSTARPSTATIC","ARP","RSTARPSTATIC","6","Theuserchooses[operation-type]whendecidingwhethertoresetarpstatic.
","提示用户确认是否删除静态ARP表项.
","[operation-type]:用户选择的操作类型.
","执行命令前需要用户确认.
","1.
正常运行信息,无需处理.
""ASSOC/4/ATTACK","ASSOC","ATTACK","4","Anassociatedintrusionwasdetected.
(SyslogId=[syslog-id],VSys=[vsys-name],Policy=[policy-name],SrcIp=[source-ip],DstIp=[destination-ip],SrcPort=[source-port],DstPort=[destination-port],SrcZone=[source-zone],DstZone=[destination-zone],User=[user-name],Protocol=[protocol],Application=[application-name],Profile=[profile-name],SignName=[signature-name],SignId=[signature-id],EventNum=[event-number],Target=[target],Severity=[severity],Os=[operating-system],Category=[category],Action=[action])","系统检测到一个关联威胁事件,日志中描述了该关联威胁事件的详细信息.
","syslog-id:日志序号.
vsys-name:虚拟系统名称.
policy-name:安全策略名称.
source-ip:报文的源IP地址.
destination-ip:报文的目的IP地址.
source-port:报文的源端口(对于ICMP报文,该字段为0).
destination-port:报文的目的端口(对于ICMP报文,该字段为0).
source-zone:报文的源安全域.
destination-zone:报文的目的安全域.
user-name:用户名.
protocol:签名检测到的报文所属协议.
application-name:签名检测到的报文所属应用.
profile-name:配置文件的名称.
signature-name:签名的名称.
signature-id:签名的ID.
event-number:日志归并引入字段,是否归并需根据归并频率及日志归并条件来确定,不发生归并则为1.
target:签名所检测的报文所攻击对象.
具体情况如下:·server:攻击对象为服务端.
·client:攻击对象为客户端.
·both:攻击对象为服务端和客户端.
severity:签名所检测的报文所造成攻击的严重性.
具体情况如下:·information:表示严重性为提示.
·low:表示严重性为低.
·medium:表示严重性为中.
·high:表示严重性为高.
operating-system:签名所检测的报文所攻击的操作系统.
具体情况如下:·all:表示所有系统.
·android:表示安卓系统.
·ios:表示苹果系统.
·unix-like:表示Unix系统.
·windows:表示Windows系统.
·other:表示其他系统.
category:签名检测到的报文攻击特征所属的威胁分类.
action:签名动作.
具体情况如下:·alert:签名动作为告警.
·block:签名动作为阻断.
·allow:签名动作为允许.
","检测到了关联威胁事件.
","1.
正常运行信息,无需处理.
""AV/4/VIRUS","AV","VIRUS","4","Aviruswasdetected.
(SyslogId=[syslog-id],Policy=[policy-name],SrcIp=[source-ip-address],DstIp=[destination-ip-address],SrcPort=[source-port],DstPort=[destination-port],Protocol=[protocol],Application=[application-name],Profile=[profile-name],EventNum=[event-number],SignatureId=[signature-id],ViruName=[virus-name],DetectionType=[detection-type],Direction=[direction],FileName=[file-name],FileType=[file-type],Action=[action])","进行病毒检测时发现病毒.
","syslog-id:日志序号.
policy-name:安全策略名称.
source-ip-address:源IP地址.
destination-ip-address:目的IP地址.
source-port:源端口.
destination-port:目的端口.
protocol:协议.
application-name:应用.
profile-name:配置文件的名称.
event-number:事件计数.
signature-id:特征序号.
virus-name:病毒名称.
detection-type:检测类型:·virusdetect:病毒检测·heuristicdetect:启发式检测·file-reputationdetect:文件信誉检测direction:传输方向.
file-name:文件名.
file-type:文件类型.
action:动作.
","进行病毒扫描时,发现了病毒.
","1.
系统已自动处理,无需手动操作.
""BGP/4/ASPATH_EXCEED_MAXNUM","BGP","ASPATH_EXCEED_MAXNUM","4","ThenumberofAS-PATHsexceededthelimit([limit-value]).
(Operation=[STRING])","AS-PATH的数量超出了限制值.
","[limit-value]:AS-PATH数量限制值.
Operation:相应的操作.
常见的操作有丢弃路由、策略不生效、聚合命令失败.
·丢弃路由:TheNLRIwillbetreatedasWithdraw.
·不带as-set聚合:Itwillaggregatewithoutas-set.
·策略不生效:Thepolicyapplywillnotwork.
","AS-PATH的数量超出了限制值.
","1.
正常运行信息,无需处理.
""BGP/4/CANNOT_FIND_PEER","BGP","CANNOT_FIND_PEER","4","WhenthesystembackeduptheGRcapability,BGPcouldnotfindthepeer[STRING].
(AFI=[USHORT],SAFI=[USHORT])","系统在备份GR能力数据时,BGP找不到Peer.
","[STRING]:邻居IP地址.
AFI:邻居的地址族.
SAFI:邻居的子地址族.
","主备板的配置不一致.
","1.
备板使用与主板相同的配置文件重新启动.
""BGP/6/CONFIRM_N","BGP","CONFIRM_N","6","Auserinput"No"torejecttheoperation.
","等待用户确认时,用户输入了N.
","BGP改变与连接有关的配置时,需要重置连接,因此需要用户输入确认信息,用户输入N退出该操作.
","BGP/6/CONFIRM_TIMEOUT","1.

正常运行信息,无需处理.
""CONFIRM_TIMEOUT","BGP","Whenauserdidnotinputanywordin[timeout-time]s,thesystemexitedfromtheoperationautomatically.
","6","等待用户确认时,用户在n秒内没有任何输入,系统自动退出.
","[timeout-time]:从系统开始等待用户确认到用户最终确认的最大等待秒数.
","BGP改变与连接有关的配置时,需要重置连接,因此需要用户输入确认信息,用户在n秒内没有任何输入,系统缺省认为不执行并退出该确认.
","BGP/6/CONFIRM_Y","1.

正常运行信息,无需处理.
""CONFIRM_Y","BGP","Auserinput"Yes"toconfirmtheoperation.
","6","等待用户确认时,用户输入了Y.
","BGP改变与连接有关的配置时,需要重置连接,因此需要用户输入确认信息,用户输入Y执行操作.
","BGP改变与连接有关的配置时,需要重置连接,因此需要用户输入确认信息,用户输入N退出该操作.
","BGP/6/GR_NOTIFY_ENTER","1.

正常运行信息,无需处理.
""GR_NOTIFY_ENTER","BGP","BGPenteredtheGRstatus.
","6","BGP协议进入GR状态.
","BGP/6/GR_NOTIFY_EXIT","BGP改变与连接有关的配置时,需要重置连接,因此需要用户输入确认信息,用户输入N退出该操作.
","BGP/6/GR_NOTIFY_EXIT","1.

正常运行信息,无需处理.
""GR_NOTIFY_EXIT","BGP","BGPexitedfromtheGRstatus.
","6","BGP协议退出GR状态.
","BGP协议退出gracefulrestart状态.
","BGP改变与连接有关的配置时,需要重置连接,因此需要用户输入确认信息,用户输入N退出该操作.
","BGP/6/INST_EXIT_GR","1.

正常运行信息,无需处理.
""INST_EXIT_GR","BGP","TheBGPinstance[vpn-instance]exitedfromGRandnotifiedtheRM.
","6","BGP实例退出GR,并通知RM.
","[vpn-instance]:VPN实例.
","GR正常流程,某BGP实例退出GR时触发.
","BGP/4/IPV4_ROUTE_LCS_EXC","1.
正常运行信息,无需处理.
""IPV4_ROUTE_LCS_EXC","BGP","ThenumberofIPv4routesreachedthemaximumvalue[max-route-value]definedintheLicensefile.
","4","IPv4路由数量达到license文件中规定的最大值.
","[max-route-value]:License文件中规定的IPv4路由最大数目.
","IPv4路由数目超过了license许可的最大值.
","1.
检查网络拓扑和配置,确认路由量超限是实际应用需求还是错误的拓扑配置导致.
2.
如果是实际应用需求,请扩容LICENSE.
","BGP/3/IPV6_ROUTE_LCS_EXCD""IPV6_ROUTE_LCS_EXCD","BGP","ThenumberofIPv6routesreachedthemaximumvalue[max-route-value]definedintheLicensefile.
","3","IPv6路由数量达到license文件中规定的最大值.
","[max-route-value]:License文件中规定的IPv6路由最大数目.
","IPv6路由数目超过了license许可的最大值.
","BGP/3/MEMORY_RESTORE","BGP/3/IPV6_ROUTE_LCS_EXCD""MEMORY_RESTORE","BGP","ThemessagethatmemorywasrestoredwasreceivedfromtheRM.
","3","从RM接收到内存恢复消息.
","路由器的内存使用率从MEMORYSHORTAGE状态重新降低到阈值以下.
","BGP改变与连接有关的配置时,需要重置连接,因此需要用户输入确认信息,用户输入N退出该操作.
","1.
请联系技术支持工程师.
","BGP/6/RECV_NOTIFY""RECV_NOTIFY","BGP","TherouterreceivedNOTIFICATIONmessagefrompeer[neighbor-address].
(ErrorCode=[ULONG],SubErrorCode=[ULONG],BgpAddressFamily=[STRING],ErrorData=[STRING])","6","路由器收到BGP邻居发来的NOTIFICATION报文.
","[neighbor-address]:邻居路由器的IP地址.
ErrorCode:NOTIFICATION报文中携带的错误码.
SubErrorCode:NOTIFICATION报文中携带的错误子码.
BgpAddressFamily:BGP地址族标志.
分为PUBLIC和VPN两种.
ErrorData:NOTIFICATION报文中携带的错误数据摘要.
","路由器收到BGP邻居发来Notification报文,包括错误码和错误子码内容.
","1.
请确认BGP邻居断连的原因,是否执行了resetbgp命令.
2.
错误码和错误子码的描述和可能原因,请参考BGP维护手册.
3.
请联系技术支持工程师.
","BGP/3/RECV_UNSPT_AFI""RECV_UNSPT_AFI","BGP","TheUPDATEmessagereceivedfrompeer[peer-address]containedunknownaddressfamily[address-family-attribute]inpathattributeofmulti-protocolunreachablenetworklayerreachableinformation.
","3","从BGP邻居收到的UPDATE报文中,多协议不可达路由信息的路由属性包含未知的地址族属性.
","[peer-address]:对等体IP地址.
[address-family-attribute]:地址族属性值.
","Update报文中多协议不可达路由信息的路由属性包含未知的地址族属性.
","1.
查看两端是否为不同厂商设备,支持的功能范围是否有所不同.
2.
请联系华为技术支持工程师.
","BGP/3/ROUTEADD_REACHLMT""ROUTEADD_REACHLMT","BGP","Failedtoupdatetherouteinthe[flag]instancebecausethenumberofroutesreachedthemaximum.
","3","在实例中路由更新失败,原因是路由量达到上限.
","[flag]:BGP地址族标志.
分为PUBLIC和VPN.
","路由量超过了路由表阈值,导致BGP路由添加失败.
","1.
检查网络拓扑和配置,确认路由量超阈值是实际应用需求还是错误的拓扑配置导致.
2.
如果是实际应用需求,请扩容LICENSE.
","BGP/3/ROUTPRIX_EXCEED""ROUTPRIX_EXCEED","BGP","Routesreceivedfrompeer[neighbor-address]includingthenumberofprefix[receive-prefix-number]exceededthemaxnumberofprefix[max-prefix-number].
(BgpAddressFamily=[STRING])","3","从一个邻居路由器收到的前缀数目超过了设定的最大值.
","[neighbor-address]:邻居路由器的IP地址.
[receive-prefix-number]:从邻居路由器收到的前缀个数.
[max-prefix-number]:最大的前缀个数.
BgpAddressFamily:BGP地址族标志.
分为PUBLIC和VPN两种.
","从一个邻居路由器收到路由数目超过了设定的最大值.
","1.
检查网络拓扑和配置,确认路由量超限是实际应用需求还是错误的拓扑配置导致.
2.
如果是实际应用需求,请修改peerroute-limit的配置.
","BGP/3/ROUTTHRD_REACHED""ROUTTHRD_REACHED","BGP","Thenumberofroutesreceivedfrompeer[neighbor-address]reachedroutethresholdvalue[threshold-value].
(BgpAddressFamily=[STRING],CurrentRouteNumber=[ULONG],MaxRouteNumber=[ULONG])","3","从一个邻居路由器收到路由数目超过了设定的阈值.
","[neighbor-address]:邻居路由器的IP地址.
[threshold-value]:路由数阈值.
BgpAddressFamily:BGP地址簇.
CurrentRouteNumber:当前路由数;MaxRouteNumber:最大的路由数.
","1.
检查网络拓扑和配置,确认路由量超阈值是实际应用需求还是错误的拓扑配置导致.
2.
如果是实际应用需求,请修改Peerroute-limit配置.
","[neighbor-address]:邻居路由器的IP地址.
[threshold-value]:路由数阈值.
BgpAddressFamily:BGP地址簇.
CurrentRouteNumber:当前路由数;MaxRouteNumber:最大的路由数.
","BGP/6/SEND_NOTIFY""SEND_NOTIFY","BGP","TheroutersentaNOTIFICATIONmessagetopeer[peer-address].
(ErrorCode=[ULONG],SubErrorCode=[ULONG],BgpAddressFamily=[STRING],ErrorData=[STRING])","6","路由器向BGP邻居发送NOTIFICATION报文.
","[peer-address]:对等体的IP地址.
ErrorCode:发送报文中携带的错误码.
SubErrorCode:错误子码的值.
BgpAddressFamily:BGP地址族标志.
分为PUBLIC和VPN两种.
ErrorData:发送报文中携带的错误数据摘要.
","路由器向BGP邻居发送Notification报文,包括错误码和子错误码内容.
","1.
请确认BGP邻居断连的原因,是否执行了resetbgp命令.
2.
错误码和错误子码的描述和可能原因,请参考BGP维护手册.
3.
请联系技术支持工程师.
","BGP/6/SNMP_PEER_SHUTDOWN""SNMP_PEER_SHUTDOWN","BGP","AnSNMPcommandwasreceivedtoshutdowntheBGPconnectionbetweenpeers.
(BgpAddressFamily=Public)","6","接收到了一个SNMP命令,peer将要shutdown.
","通过MIB软件设定stop,断连接.
","BGP改变与连接有关的配置时,需要重置连接,因此需要用户输入确认信息,用户输入N退出该操作.
","BGP/4/SPEC_RT_EXCD","1.

正常运行信息,无需处理.
""SPEC_RT_EXCD","BGP","ThenumberofBGP[route-type]routesreachedthemaximumvalue[max-route-value].
","4","BGP的某种路由数量达到最大值.
","[route-type]:路由类型.
[max-route-value]:路由数量最大值.
","1.
检查网络拓扑和配置,确认路由量超限是实际应用需求还是错误的拓扑配置导致.
2.
如果是实际应用需求,请联系华为技术支持工程师进行扩容.
","[route-type]:路由类型.
[max-route-value]:路由数量最大值.
","BGP/4/SPEC_RT_EXCD_THLD""SPEC_RT_EXCD_THLD","BGP","ThenumberofBGP[route-type]routesreachedthethresholdvalue[threshold-value].
","4","BGP的某种路由数量达到阈值.
","[route-type]:BGP路由类型.
·IPv4:IPv4路由,包括IPv4公网路由和IPv4私网路由·IPv4Public:IPv4公网路由·IPv4VRF:IPv4私网路由·IPv6:IPv6路由,包括IPv6公网路由和IPv6私网路由·IPv6Public:IPv6公网路由·IPv6VRF:IPv6私网路由·L2AD:BGPL2VPN-AD路由[threshold-value]:BGP的某种路由数量的阈值.
","BGP的某种路由数量达到阈值上限值.
","1.
检查网络拓扑和配置,确认路由数量超限是实际应用需求还是异常配置导致.
2.
如果是实际应用需求,请联系工程师进行扩容.
","BGP/3/STATE_CHG_UPDOWN""STATE_CHG_UPDOWN","BGP","Thestatusofthepeer[peer-address]changedfrom[previous-state]to[current-state].
(BgpAddressFamily=[STRING])","3","邻居状态改变.
","[peer-address]:BGP对等体的IP地址.
[previous-state]:前一状态.
[current-state]:当前状态.
BgpAddressFamily:地址族名称.
","BGP连接状态发生切换.
","BGP/4/UNKNOWN_TYPE","1.
正常运行信息,无需处理.
""UNKNOWN_TYPE","BGP","Typeofthebackupdatawasunknown.
(ID=[USHORT],Length=[USHORT])","4","主板的备份信息在备板无法被识别.
","ID:备份数据的ID.
Length:备份数据的长度.
","主备板的版本不一致.
","1.
备板使用与主板相同的版本重新启动.
","BLACKLIST/4/ADDOK""BLACKLIST","ADDOK","Ablacklistentrywasadded.
(SyslogId=[syslog-id],IpVersion=[ip-version],SrcIp=[source-ip-address],DstIp=[destination-ip-address],SrcPort=[source-port],DstPort=[destination-port],Protocol=[protocol],User=[user-name],VSysId=[vsys-id],VSys=[vsys],Reason=[reason],Timeout=[timeout]min)","4","黑名单添加成功.
","syslog-id:表示日志序号.
ip-version:表示IP地址版本号.
取值包括IPv4和IPv6.
source-ip-address:表示源IP地址.
destination-ip-address:表示目的IP地址.
source-port:表示源端口.
destination-port:表示目的端口.
protocol:表示协议.
user-name:表示用户名.
vsys-id:表示虚拟系统ID.
vsys:表示虚拟系统名称.
reason:表示添加黑名单的原因,可能的取值如下:·ManualInsert:手动插入·LoginFailed:登录失败·Ddosdetect:Ddos检测·IPSweep:IP地址扫描·PortScan:端口扫描·Getfloodattack:Getflood攻击·IllegalSessionattack:异常会话攻击·IllegalAccessattack:非法访问攻击·SYNSourcedetect:SYN源探测·HTTPSourcedetect:HTTP源探测·SIPSourcedetect:源探测·IPSAttack:IPS攻击·IPSAssociate:IPS关联检测·Unknowreason:不明原因timeout:表示黑名单超时时间.
","原因1:管理员手动创建一条黑名单.
原因2:设备自动生成一条黑名单.
","BLACKLIST/4/DELALLOK","1.
正常运行信息,无需处理.
""DELALLOK","ADDOK","Allblacklistentriesweredeleted.
(SyslogId=[syslog-id],VSysId=[vsys-id],VSys=[vsys])","4","删除所有黑名单成功.
","syslog-id:表示日志序号.
vsys-id:表示虚拟系统ID.
vsys:表示虚拟系统名称.
","成功删除所有黑名单.
","BLACKLIST/4/DELOK","1.
正常运行信息,无需处理.
""DELOK","ADDOK","Ablacklistentrywasdeleted.
(SyslogId=[syslog-id],IpVersion=[ip-version],SrcIp=[source-ip-address],DstIp=[destination-ip-address],SrcPort=[source-port],DstPort=[destination-port],Protocol=[protocol],User=[user-name],VSysId=[vsys-id],VSys=[vsys])","4","删除一条黑名单成功.
","syslog-id:表示日志序号.
ip-version:表示IP地址版本号.
取值包括IPv4和IPv6.
source-ip-address:表示源IP地址.
destination-ip-address:表示目的IP地址.
source-port:表示源端口.
destination-port:表示目的端口.
protocol:表示协议.
user-name:表示用户名.
vsys-id:表示虚拟系统ID.
vsys:表示虚拟系统名称.
","原因1:管理员手动删除一条黑名单.
原因2:黑名单超时时间结束后,设备动态删除一条黑名单.
","BULKSTAT/5/BULK_DISABLE_NO","1.
正常运行信息,无需处理.
""BULKSTAT","BULK_DISABLE_NO","5","Whenbeingaskedwhethertocommitthecommand"undobulk-statenable",theuserchoseN.
","当去使能BULK模块时,打入命令"undobulk-statenable"后,选择是NO.
","去使能BULK模块.
","无:无","BULKSTAT/5/BULK_DISABLE_YES","1.
正常运行信息,无需处理.
""BULK_DISABLE_YES","BULK_DISABLE_NO","Whenbeingaskedwhethertocommitthecommand"undobulk-statenable",theuserchoseY.
","Whenbeingaskedwhethertocommitthecommand"undobulk-statenable",theuserchoseN.
","当去使能BULK模块时,打入命令"undobulk-statenable"后,选择是YES.
","BULKSTAT/4/BULK_TRANSFER_FILE","无:无","BULKSTAT/5/BULK_DISABLE_YES","1.
正常运行信息,无需处理.
""BULK_TRANSFER_FILE","BULK_DISABLE_NO","TheBULKstatisticsfilewastransferredthrough[TFTP/FTP/SFTP].
(UserName=[STRING],OperateType=[STRING],SrcFile=[STRING],DstFile=[STRING],DstHost=[STRING],VPN=[STRING],ErrCode=[LONG])","4","当使用TFTP/FTP/SFTP上传BULK文件后,记录上传文件日志.
","TFTP/FTP/SFTP:上传统计文件的协议.
UserName:用户名称.
OperateType:操作类型.
SrcFile:源文件.
DstFile:目标文件.
DstHost:目标主机.
VPN:VPN实例名称.
ErrCode:错误编码.
","BULK自动上传统计文件.
","BULKSTAT/3/CONNECTION_FAILED","1.
正常运行信息,无需处理.
""CONNECTION_FAILED","BULK_DISABLE_NO","OID[oid]FailedtouploadtheURL.
(FileIndex=[integer],FileName=[octet],PrimaryUrl=[octet],SecondaryUrl=[octet])","3","当向主URL和备URL传输文件都失败时,通过Trap告知网管主备上传链路发生故障.
","oid:OID值.
FileIndex:文件索引.
FileName:文件名.
PrimaryUrl:主URL地址.
SecondaryUrl:备份URL地址.
","原因1:上传的主备链路是否全部断开.
原因2:主备链路是否不存在.
","1.
重新配置一条有效的主用链路或备用链路.
","BULKSTAT/5/CONNECTION_RESUME""CONNECTION_RESUME","BULK_DISABLE_NO","OID[oid]SucceededinuploadingtheURL.
(FileIndex=[integer],FileName=[octet],PrimaryUrl=[octet],SecondaryUrl=[octet])","Whenbeingaskedwhethertocommitthecommand"undobulk-statenable",theuserchoseN.
","当向主URL或备URL重传成功后,通过发送Trap告知网管上传链路故障已经恢复.
","上传链路恢复正常.
","原因1:上传的主备链路是否全部断开.
原因2:主备链路是否不存在.
","BULKSTAT/3/FILE_DISCARD","1.
正常运行信息,无需处理.
""FILE_DISCARD","BULK_DISABLE_NO","OID[oid]Thefilewasdiscardedbecauseoftransferfailure.
(FileIndex=[integer],FileName=[octet],LastTransferFailTime=[integer])","3","统计文件的保存时间结束时,文件仍然没有上传成功.
设备将中止上传链接,删除内存中的压缩文件,并发送此Trap.
","oid:OID值.
FileIndex:文件索引.
FileName:文件名.
LastTransferFailTime:上一次文件传输失败的时间.
","原因1:上传的主备链路是否全部断开或者主备链路是否不存在.
原因2:上传时间超过了文件的保存时间.
","1.
重新配置一条主用链路或备用链路.
2.
减少配置的统计对象或者增大上传链路的带宽.
3.
结束.
","BWM/4/SESS_DEDIC""BWM","SESS_DEDIC","Thenumberofconcurrentsessionsexceededthethreshold.
(vsys=[vsys-name],policy=[policy-name],direction=[direction],profile=[profile-name],peakrate=[peak-rate],sessioncountthreshold=[session-count-threshold],congestiontimeproportion=[congestion-time-proportion]%)","4","在独占型带宽通道中,显示整体最大连接数限制丢弃的报文信息.
","vsys-name:虚拟系统名称.
policy-name:带宽策略名称.
direction:带宽通道的方向.
profile-name:带宽通道名称.
peak-rate:连接数峰值.
session-count-threshold:整体最大连接数.
congestion-time-proportion:拥塞时间比例.
","实际连接数超过配置的整体最大连接数,NIP产生丢包.
","1.
正常运行信息,无须处理.
","BWM/4/SESS_IP""SESS_IP","SESS_DEDIC","Thenumberofconcurrentsessionsexceededthethreshold.
(vsys=[vsys-name],policy=[policy-name],direction=[direction],IPaddress=[ip-address],peakrate=[peak-rate],sessioncountthreshold=[session-count-threshold],congestiontimeproportion=[congestion-time-proportion]%)","4","显示每IP最大连接数限制丢弃的报文信息.
","vsys-name:虚拟系统名称.
policy-name:带宽策略名称.
direction:带宽通道的方向.
ip-address:被限制连接数的IP地址.
peak-rate:连接数峰值.
session-count-threshold:每IP最大连接数.
congestion-time-proportion:拥塞时间比例.
","实际连接数超过配置的每IP最大连接数,NIP产生丢包.
","BWM/4/SESS_SHARED","BWM/4/SESS_IP""SESS_SHARED","SESS_DEDIC","Thenumberofconcurrentsessionsexceededthethreshold.
(vsys=[vsys-name],profile=[profile-name],peakrate=[peak-rate],sessioncountthreshold=[session-count-threshold],congestiontimeproportion=[congestion-time-proportion]%)","4","在共享型带宽通道中,显示整体最大连接数限制丢弃的报文信息.
","vsys-name:虚拟系统名称.
profile-name:带宽通道名称.
peak-rate:连接数峰值.
session-count-threshold:整体最大连接数.
congestion-time-proportion:拥塞时间比例.
","BWM/4/SESS_RATE_DEDIC","1.
正常运行信息,无须处理.
","BWM/4/SESS_IP""SESS_RATE_DEDIC","SESS_DEDIC","Thesessioncreationrateexceededthethreshold.
(vsys=[vsys-name],policy=[policy-name],direction=[direction],profile=[profile-name],peakrate=[peak-rate],sessioncreationratethreshold=[session-creation-rate-threshold],congestiontimeproportion=[congestion-time-proportion]%)","4","在独占型带宽通道中,显示整体新建连接速率限制丢弃的报文信息.
","vsys-name:虚拟系统名称.
policy-name:带宽策略名称.
direction:带宽通道的方向.
profile-name:带宽通道名称.
peak-rate:新建连接速率峰值.
session-creation-rate-threshold:配置的整体新建连接速率.
congestion-time-proportion:拥塞时间比例.
","实际新建连接速率超过配置的整体新建连接速率,NIP产生丢包.
","BWM/4/SESS_RATE_IP","BWM/4/SESS_IP""SESS_RATE_IP","SESS_DEDIC","Thesessioncreationrateexceededthethreshold.
(vsys=[vsys-name],policy=[policy-name],direction=[direction],IPaddress=[ip-address],peakrate=[peak-rate],sessioncreationratethreshold=[session-creation-rate-threshold],congestiontimeproportion=[congestion-time-proportion]%)","4","显示每IP新建连接速率限制丢弃的报文信息.
","vsys-name:虚拟系统名称.
policy-name:带宽策略名称.
direction:带宽通道的方向.
ip-address:被限制新建连接速率的IP地址.
peak-rate:新建连接速率峰值.
session-creation-rate-threshold:配置的每IP新建连接速率.
congestion-time-proportion:拥塞时间比例.
","实际新建连接速率超过配置的每IP新建连接速率,NIP产生丢包.
","BWM/4/SESS_RATE_SHARED","BWM/4/SESS_IP""SESS_RATE_SHARED","SESS_DEDIC","Thesessioncreationrateexceededthethreshold.
(vsys=[vsys-name],profile=[profile-name],peakrate=[peak-rate],sessioncreationratethreshold=[session-creation-rate-threshold],congestiontimeproportion=[congestion-time-proportion]%)","4","在共享型带宽通道中,显示整体新建连接速率限制丢弃的报文信息.
","vsys-name:虚拟系统名称.
profile-name:带宽通道名称.
peak-rate:新建连接速率峰值.
session-creation-rate-threshold:配置的整体新建连接速率.
congestion-time-proportion:拥塞时间比例.
","BWM/4/TRAF_DEDIC","BWM/4/SESS_RATE_IP","BWM/4/SESS_IP""TRAF_DEDIC","SESS_DEDIC","Trafficexceededthebandwidththreshold.
(vsys=[vsys-name],policy=[policy-name],direction=[direction],profile=[profile-name],peakrate=[peak-rate]Kbps,bandwidththreshold=[bandwidth-threshold]Kbps,congestiontimeproportion=[congestion-time-proportion]%)","4","在独占型带宽通道中,显示整体最大带宽限制丢弃的报文信息.
","vsys-name:虚拟系统名称.
policy-name:带宽策略名称.
direction:带宽通道的方向.
profile-name:带宽通道名称.
peak-rate:带宽峰值.
bandwidth-threshold:每用户最大带宽值.
congestion-time-proportion:拥塞时间比例.
","实际带宽超过配置的整体最大带宽,NIP产生丢包.
","BWM/4/TRAF_IP","BWM/4/SESS_IP""TRAF_IP","SESS_DEDIC","Trafficexceededthebandwidththreshold.
(vsys=[vsys-name],policy=[policy-name],direction=[direction],IPaddress=[ip-address],peakrate=[peak-rate]Kbps,bandwidththreshold=[bandwidth-threshold]Kbps,congestiontimeproportion=[congestion-time-proportion]%)","4","显示每IP带宽限制丢弃的报文信息.
","vsys-name:虚拟系统名称.
policy-name:带宽策略名称.
direction:带宽通道的方向.
ip-address:被限制带宽的IP地址.
peak-rate:带宽峰值.
bandwidth-threshold:每IP最大带宽值.
congestion-time-proportion:拥塞时间比例.
","实际带宽超过配置的每IP最大带宽,NIP产生丢包.
","BWM/4/TRAF_SHARED","BWM/4/SESS_IP""TRAF_SHARED","SESS_DEDIC","Trafficexceededthebandwidththreshold.
(vsys=[vsys-name],profile=[profile-name],peakrate=[peak-rate]Kbps,bandwidththreshold=[bandwidth-threshold]Kbps,congestiontimeproportion=[congestion-time-proportion]%)","4","在共享型带宽通道中,显示整体最大带宽限制丢弃的报文信息.
","vsys-name:虚拟系统名称.
profile-name:带宽通道名称.
peak-rate:带宽峰值.
bandwidth-threshold:每用户最大带宽值.
congestion-time-proportion:拥塞时间比例.
","CASA/4/CASA","BWM/4/TRAF_IP","BWM/4/SESS_IP""CASA","Thecloudaccesssecurityawarenesspolicywasmatched.
(SyslogId=[syslog-id],Policy=[policy-name],SrcIp=[source-ip-address],DstIp=[destination-ip-address],SrcPort=[source-port],DstPort=[destination-port],Protocol=[protocol],Application=[application-name],Profile=[profile-name],Action=[action])","Thecloudaccesssecurityawarenesspolicywasmatched.
(SyslogId=[syslog-id],Policy=[policy-name],SrcIp=[source-ip-address],DstIp=[destination-ip-address],SrcPort=[source-port],DstPort=[destination-port],Protocol=[protocol],Application=[application-name],Profile=[profile-name],Action=[action])","4","命中云接入安全感知策略,对用户行为进行控制.
","syslog-id:日志序号.
policy-name:安全策略名称.
source-ip-address:源IP地址.
destination-ip-address:目的IP地址.
source-port:源端口.
destination-port:目的端口.
protocol:协议.
application-name:应用.
profile-name:配置文件的名称.
action:动作.
","用户对云应用的访问命中云接入安全感知策略,需要对云应用的访问进行控制.
","CFM/4/B2S_BACKUP_FAILED","1.
正常运行信息,无需处理.
""CFM","B2S_BACKUP_FAILED","Failedtotransfertheconfigurationfiletoserver[server-ip]through[transport-type]whenautomaticallybackinguptheconfiguration.
","4","备份配置文件到服务器的时候,传送配置数据失败.
","[server-ip]:服务器IP地址.
[transport-type]:文件传输方式,如FTP、TFTP、SFTP等.
","1.
用户名不存在或者密码不正确2.
服务器路径不存在3.
传输过程中由于网络原因,服务器不可达","1.
测试服务器是否可达,使用ping命令查看客户端与服务器之间是否可以ping通.
2.
将设备做为客户端,访问服务器.
3.
如果服务器路径配置错误,请重新配置相应参数.
4.
如果出现一次文件传输失败,可以不用处理,可能和当时网络状态有关.
如果出现多次文件传输失败,请检查设备和服务器的链路情况.
","CFM/4/CFM_CLEARINTERFACECFG""CFM_CLEARINTERFACECFG","B2S_BACKUP_FAILED","Whendecidingwhethertoclearconfiguration(s)oftheinterface[interface-name],theuserchose[Y/N].
","4","当决定是否清除接口的配置时,需要用户确认.
","interface-name:接口名称.
Y/N:用户确认的字符Y/N.
","执行命令过程中需要用户确认是否清除接口的配置.
","CFM/4/CFM_INCONSISTENT_FILE_IMG","1.
正常运行信息,无需处理.
""CFM_INCONSISTENT_FILE_IMG","B2S_BACKUP_FAILED","Iftheimagefileinmasterandslaveboardisinconsistentwhensystemreboot,theslaveboardwillfailtoregister.
(Fileinmaster=[STRING],Fileinslave=[STRING])","4","系统重启时,如果主用主控板和备用主控板镜像文件不一致,将导致备用主控板注册失败.
","Fileinmaster:主用主控板文件名称.
Fileinslave:备用主控板文件名称.
","主用主控板和备用主控板镜像文件不一致.
","1.
确保主用主控板和备用主控板镜像文件一致.
","CFM/4/CFM_INCONSISTENT_FILE_CFG""CFM_INCONSISTENT_FILE_CFG","B2S_BACKUP_FAILED","Iftheconfigurationfileinmasterandslaveboardisinconsistentwhensystemreboot,theconfigurationinmasterboardmaylose.
(Fileinmaster=[Fileinmaster],Fileinslave=[Fileinslave],Reason=[Reason])","4","系统重启时,如果主用主控板和备用主控板配置文件不一致,将导致主用主控板的配置文件丢失.
","Fileinmaster:主用主控板配置文件名称.
Fileinslave:备用主控板配置文件名称.
Reason:主用主控板和备用主控板配置文件不一致的原因:·1:配置文件的大小不一致·2:其他原因","主用主控板和备用主控板配置文件不一致.
","1.
确保主用主控板和备用主控板配置文件一致.
","CFM/6/CFM_OVERWRITESOFTWARE""CFM_OVERWRITESOFTWARE","B2S_BACKUP_FAILED","Whendecidingwhethertooverwritethesystemsoftwarefile,theuserchose[Y/N].
","6","当决定是否覆盖系统文件时,用户选择了Y或者N进行确认.
","Y/N:用户确认是否覆盖系统文件:·Y:覆盖系统文件·N:不覆盖系统文件","用户在设置下次启动系统文件时,如果备用主控板上存在相同名称的系统文件,系统会提示用户是否覆盖系统文件.
","CFM/3/CFM_SLAVERUNCMDFAIL","1.

正常运行信息,无需处理.
""CFM_SLAVERUNCMDFAIL","B2S_BACKUP_FAILED","Failedtoexecutecommandonslaveboard.
(Taskname=[STRING],IPaddress=[STRING],Username=[STRING],Command=[STRING])","3","在备用主控板上执行命令失败.
","Taskname:任务名称.
IPaddress:登录的IP地址.
当设备无法获取IP地址时,使用"**"记录.
例如通过Console口或Aux口登录用户的场景.
Username:登录的用户名.
当设备无法获取用户名时,使用"**"记录.
例如通过密码认证登录用户的场景.
Command:执行的命令.
","命令在主用主控板上成功配置,实时备份到备用主控板后执行失败.
","1.
请收集相关配置信息、日志,联系华为技术支持工程师.
","CFM/4/CFM_SYNCFGFILEFAIL""CFM_SYNCFGFILEFAIL","B2S_BACKUP_FAILED","Failedtosynchronizethenextstartupconfigurationfiletoslaveboard.
(FileName=[FileName],SlotNum=[SlotNum])","4","同步下次启动配置文件到备用主控板失败.
","FileName:下次启动配置文件的名称.
SlotNum:备用主控板所在的槽位号.
","备用主控板同步主用主控板的下次启动配置文件失败.
","1.
主用主控板和备用主控板的下次启动配置文件可能不一致,建议用户在设备完成启动之后在备用主控板上手动同步主用主控板的下次启动配置文件.
","CFM/6/CFM_UNDO_SCHEDULE_NO""CFM_UNDO_SCHEDULE_NO","B2S_BACKUP_FAILED","Whenbeingaskedwhethertoundoschedulerebootfunction,theuserchoseN.
","6","当用户选择是否取消定时重启功能时,用户选择了N.
","设置启动系统软件或配置文件时,如已设置定时重启功能,会提示用户是否需要取消定时重启功能.
·如果选择Y,则取消定时重启功能,并继续启动系统软件或配置文件的设置过程.
·如果选择N,则中断设置流程.
此时用户选择了N.
","无:无","CFM/6/CFM_UNDO_SCHEDULE_YES","1.
正常运行信息,无需处理.
""CFM_UNDO_SCHEDULE_YES","B2S_BACKUP_FAILED","Whenbeingaskedwhethertoundoschedulerebootfunction,theuserchoseY.
","6","当用户选择是否取消定时重启功能时,用户选择了Y.
","设置启动系统软件或配置文件时,如已设置定时重启功能,会提示用户是否需要取消定时重启功能.
·如果选择Y,则取消定时重启功能,并继续启动系统软件或配置文件的设置过程.
·如果选择N,则中断设置流程.
此时用户选择了Y.
","无:无","CFM/4/CLEAR","1.
正常运行信息,无需处理.
""CLEAR","B2S_BACKUP_FAILED","Whendecidingwhethertoclearinactiveconfigurationofslot[STRING],theuserchose[STRING].
","4","执行命令清除不在位板卡上的配置前用户的选择情况.
","[STRING]:槽位名称.
[STRING]:用户选择的操作类型.
","CFM/4/CRC_CHK","[STRING]:槽位名称.
[STRING]:用户选择的操作类型.
","1.
正常运行信息,无需处理.
""CRC_CHK","B2S_BACKUP_FAILED","Theuserchose[STRING]whendecidingwhethertocheckCRCoftheresourcefile.
","4","用户确认是否对资源文件进行CRC检查.
","[STRING]:用户输入的字符.
具体情况如下:1)Y:选择源文件校验.
2)N:不选择源文件校验.
","执行命令前用户确认.
","CFM/5/FILE_NOTEXIST","1.
正常运行信息,无需处理.
""FILE_NOTEXIST","B2S_BACKUP_FAILED","Failedtosetthe[object]becausethesystemfiledoesnotexiston[slot-id].
","Whenbeingaskedwhethertocommitthecommand"undobulk-statenable",theuserchoseN.
","设置多框的下次启动系统文件时,发现文件不存在.
","[object]:设置对象.
·startupfile:启动大包·paffile:PAF文件·licensefile:License文件·configurationfile:配置文件[slot-id]:单板名.
","执行startup命令时,指定文件在对应的单板上不存在.
","1.
执行命令dir,查看startup命令设置失败的单板上的文件是否存在.
·Y=>3·N=>22.
上传对应的文件,执行startup命令再次进行配置.
检查是否配置成功.
·Y=>4·N=>33.
执行displaydiagnostic-information命令,保存显示结果,并联系华为技术支持工程师.
4.
结束.
","CFM/4/FILELENGTH_NOTMATCH""FILELENGTH_NOTMATCH","B2S_BACKUP_FAILED","Failedtosetthe[object]becausethesizeofthesystemfileisinconsistentwiththatofthehomonymousfileon[slot-id].
","4","因为文件大小不一致导致设置对象时失败.
","指定文件在对应的单板上存在的大小不一致.
","执行startup命令时,指定文件在对应的单板上不存在.
","1.

执行命令dir,查看startup命令设置失败的单板上的文件是否和系统主控板上的文件大小一致.
·Y=>3·N=>22.
将设置失败单板上的对应文件删除,并重新上传文件,执行startup命令再次进行配置.
检查是否配置成功.
·Y=>4·N=>33.
执行displaydiagnostic-information命令,保存显示结果,并联系华为技术支持工程师.
4.
结束.
","CFM/4/OVERWRITE_FILE""OVERWRITE_FILE","B2S_BACKUP_FAILED","Whendecidingwhethertooverwritetheconfigurationfile[STRING],theuserchose[STRING].
","4","[STRING]:用户保存配置的文件名.
[STRING]:用户选择的操作类型.
","CFM/5/FILE_NOTEXIST","CFM/3/RECOVERCMDFAIL","CFM/5/FILE_NOTEXIST","1.
正常运行信息,无需处理.
""RECOVERCMDFAIL","B2S_BACKUP_FAILED","Failedtorecoverconfiguration[command]underview[view].
","3","配置恢复某一视图下的某一命令失败.
","[command]:命令字符串.
[view]:视图名.
","配置恢复过程中,配置恢复命令失败.
","1.
请联系华为技术支持工程师.
","CFM/4/RST_CFG""RST_CFG","B2S_BACKUP_FAILED","Theuserchose[Y/N]whendecidingwhethertoresetthesavedconfiguration.
","4","用户确认是否重置保存的配置.
","[Y/N]:用户选择的操作类型.
","CFM/4/SAVE","CFM/5/FILE_NOTEXIST","1.
正常运行信息,无需处理.
""SAVE","B2S_BACKUP_FAILED","Theuserchose[Y/N]whendecidingwhethertosavetheconfigurationtothedevice.
","4","用户确认是否保存配置至设备.
","CFM/4/SAVE_FILE","CFM/4/SAVE","CFM/4/SAVE_FILE","1.

正常运行信息,无需处理.
""SAVE_FILE","B2S_BACKUP_FAILED","Whendecidingwhethertosavetheconfigurationtothefile[STRING],theuserchose[STRING].
","4","用户确认是否保存配置至文件.
","CFM/5/SAVE_FILE_RECORD","CFM/3/RECOVERCMDFAIL","CFM/5/SAVE_FILE_RECORD","1.

正常运行信息,无需处理.
""SAVE_FILE_RECORD","B2S_BACKUP_FAILED","Thesystemautomaticallysavedthecurrentconfigurationtothefile.
(FileName=[STRING])","Whenbeingaskedwhethertocommitthecommand"undobulk-statenable",theuserchoseN.
","系统自动将当前配置保存到文件.
","FileName:用户保存配置的文件名.
","使用ISSU期间或开启自动保存功能时,系统自动将当前配置保存到文件.
","CFM/5/SAVECFG_NO","1.
正常运行信息,无需处理.
""SAVECFG_NO","B2S_BACKUP_FAILED","Whenbeingaskedwhethertosavecurrentconfiguration,theuserchoseN.
","Whenbeingaskedwhethertocommitthecommand"undobulk-statenable",theuserchoseN.
","系统重启前,提示用户选择是否保存配置,用户选择了否.
","系统重启前,用户选择不保存当前配置.
","无:无","CFM/5/SAVECFG_YES","1.
正常运行信息,无需处理.
""SAVECFG_YES","B2S_BACKUP_FAILED","Whenbeingaskedwhethertosavecurrentconfiguration,theuserchoseY.
","Whenbeingaskedwhethertocommitthecommand"undobulk-statenable",theuserchoseN.
","系统重启前,提示用户选择是否保存配置,用户选择了是.
","系统重启前,用户选择保存当前配置.
","无:无","CFM/5/SUMRULECANCEL","1.
正常运行信息,无需处理.
""SUMRULECANCEL","B2S_BACKUP_FAILED","Thedaylight-saving-timeconfigiscanceled.
","Whenbeingaskedwhethertocommitthecommand"undobulk-statenable",theuserchoseN.
","取消夏令时的配置.
","执行undoclockdaylight-saving-time命令进行取消系统夏令时配置.
","无:无","CFM/5/SUMRULECHG","1.
正常运行信息,无需处理.
""SUMRULECHG","B2S_BACKUP_FAILED","Thedaylight-saving-timeconfigischanged.
(DstName=[STRING],Mode=[STRING],StartConfigType=[STRING],StartDate=[STRING],StartWeek=[STRING],StartTime=[STRING],EndConfigType=[STRING],EndDate=[STRING],EndWeek=[STRING],EndTime=[STRING],OffsetTime=[STRING])","Whenbeingaskedwhethertocommitthecommand"undobulk-statenable",theuserchoseN.
","当系统时间因为夏令时配置发生变化的时候,记录配置的相应规则信息.
","DstName:夏令时名称.
Mode:夏令时模式.
StartConfigType:夏令时开始规则.
StartDate:夏令时开始日期.
StartWeek:夏令时开始星期.
StartTime:夏令时开始时间.
EndConfigType:夏令时结束规则.
EndDate:夏令时结束日期.
EndWeek:夏令时结束星期.
EndTime:夏令时结束时间.
OffsetTime:夏令时偏移量.
","执行clockdaylight-saving-time命令进行系统夏令时配置.
","CFM/5/SUMTMRCHG","1.
正常运行信息,无需处理.
""SUMTMRCHG","B2S_BACKUP_FAILED","Thesystemischangedto[para1]andthesystemtimeischangedfrom[para2]to[para3].
","Whenbeingaskedwhethertocommitthecommand"undobulk-statenable",theuserchoseN.
","当系统时间因为夏令时配置发生变化的时候,记录变化的状态和变化前后的时间.
","para1:当前系统的状态,表示为夏令时还是非夏令时.
para2:夏令时状态变化前的本地时间.
para3:夏令时状态变化后的本地时间.
","系统时间因为夏令时配置发生变化.
","CFM/4/CFM_TRANS_FILE","1.
正常运行信息,无需处理.
""CFM_TRANS_FILE","B2S_BACKUP_FAILED","Theconfigurationfilewastransferredthrough[TransProtocol].
(UserName=[UserName],OperateType=[OperateType],SrcFile=[SrcFile],DstFile=[DstFile],DstHost=[DstHost],VPN=[VPN],ErrCode=[ErrCode])","4","自动保存配置文件到服务器.
","TransProtocol:文件传输协议.
·FTP·TFTP·SFTPUserName:用户名.
OperateType:操作类型.
·Get:下载文件·Put:上传文件SrcFile:上传/下载的源文件名称.
DstFile:上传/下载后的目的文件名称.
DstHost:目的主机名.
VPN:VPN实例的名称.
ErrCode:错误码","系统自动上传/下载配置文件.
","CM/5/USER_ACCESSRESULT","1.
正常运行信息,无需处理.
""CM","USER_ACCESSRESULT","[USER_INFO_AUTHENTICATION]DEVICEMAC:[device-mac-address];DEVICENAME:[device-name];USER:[user-name];MAC:[user-mac-address];IPADDRESS:[user-ip-address];TIME:[time];ZONE:[time-zone];DAYLIGHT:[false/true];ERRCODE:[error-code];RESULT:[online-reason];CIBID:[cib-id];ACCESSTYPE:[access-type];","Whenbeingaskedwhethertocommitthecommand"undobulk-statenable",theuserchoseN.
","用户上线.
","device-mac-address:设备MAC地址.
device-name:设备名称.
user-name:用户名.
user-mac-address:用户MAC地址.
user-ip-address:用户IP地址.
time:上线时间.
time-zone:时区.
false/true:是否夏令时.
error-code:错误码.
online-reason:上线原因.
cib-id:CIB编号.
access-type:接入类型.
Note:如果用户上线不成功,则接入类型记录为None.
","CM/5/USER_OFFLINERESULT","device-mac-address:设备MAC地址.
device-name:设备名称.
user-name:用户名.
user-mac-address:用户MAC地址.
user-ip-address:用户IP地址.
time:上线时间.
time-zone:时区.
false/true:是否夏令时.
error-code:错误码.
online-reason:上线原因.
cib-id:CIB编号.
access-type:接入类型.
Note:如果用户上线不成功,则接入类型记录为None.
","1.
正常运行信息,无需处理.
""USER_OFFLINERESULT","USER_ACCESSRESULT","[USER_INFO_OFFLINE]DEVICEMAC:[device-mac-address];DEVICENAME:[device-name];USER:[user-name];MAC:[user-mac-address];IPADDRESS:[user-ip-address];TIME:[time];ZONE:[time-zone];DAYLIGHT:[false/true];ERRCODE:[error-code];RESULT:[offline-reason];CIBID:[cib-id];ACCESSTYPE:[access-type];","Whenbeingaskedwhethertocommitthecommand"undobulk-statenable",theuserchoseN.
","用户下线.
","device-mac-address:设备MAC地址.
device-name:设备名称.
user-name:用户名.
user-mac-address:用户MAC地址.
user-ip-address:用户IP地址.
time:下线时间.
time-zone:时区.
false/true:是否夏令时.
error-code:错误码.
offline-reason:下线原因.
cib-id:CIB编号.
access-type:接入类型.
Note:如果用户上线不成功,则接入类型记录为None.
","CMD/5/CMD_AUTO_UNLOCK","device-mac-address:设备MAC地址.
device-name:设备名称.
user-name:用户名.
user-mac-address:用户MAC地址.
user-ip-address:用户IP地址.
time:下线时间.
time-zone:时区.
false/true:是否夏令时.
error-code:错误码.
offline-reason:下线原因.
cib-id:CIB编号.
access-type:接入类型.
Note:如果用户上线不成功,则接入类型记录为None.
","1.
正常运行信息,无需处理.
""CMD","CMD_AUTO_UNLOCK","Thecurrentconfigurationisautomaticallyunlockedfortimeout.
(Informationofformeruserlockedtheconfiguration:UserName=[STRING],IpAddr=[STRING],VPN=[STRING])","Whenbeingaskedwhethertocommitthecommand"undobulk-statenable",theuserchoseN.
","当前配置因超时自动解锁.
","UserName:原锁定配置的用户名,当无法获取用户名时,使用"**"记录,例如通过密码认证登录用户的场景.
IpAddress:原锁定配置的用户的IP地址,当无法获取IP地址时,使用"**"记录,例如通过Console口或Aux口登录用户的场景.
VPN:原锁定配置的用户的VPN.
","配置互锁超时自动解锁.
","CMD/4/CLKCHGREBOOTCANCELED","1.
正常运行信息,无需处理.
""CLKCHGREBOOTCANCELED","CMD_AUTO_UNLOCK","Scheduledrebootwillbecanceledbecause[user-name]changedsystemclock.
","4","定时重启被取消","[user-name]:用户名.
","定时重启被取消.
","CMD/4/CMD_PRI_REARRG","1.
正常运行信息,无需处理.
""CMD_PRI_REARRG","CMD_AUTO_UNLOCK","Theuserchose[Y/N]whendecidingwhethertorearrangethecommandlevel.
","4","用户选择是否重新排列命令等级.
","CMD/4/DIAG_OVERWRITE","CFM/4/SAVE","CMD/4/DIAG_OVERWRITE","1.

正常运行信息,无需处理.
""DIAG_OVERWRITE","CMD_AUTO_UNLOCK","Theuserchose[Y/N]whendecidingwhethertooverwritethefile.
","4","用户选择是否覆盖文件.
","CMD/4/LAN_MODE","CFM/4/SAVE","CMD/4/LAN_MODE","1.
正常运行信息,无需处理.
""LAN_MODE","CMD_AUTO_UNLOCK","Theuserchose[Y/N]whendecidingwhethertochangethelanguagemode.
","4","用户选择是否改变语言模式.
","CMD/4/REBOOT","CFM/4/SAVE","CMD/4/REBOOT","1.
正常运行信息,无需处理.
""REBOOT","CMD_AUTO_UNLOCK","Theuserchose[Y/N]whendecidingwhethertorebootthesystem.
(Task=[STRING],Ip=[STRING],VpnName=[STRING],User=[STRING])","4","用户选择是否重启系统.
","[Y/N]:用户选择的操作类型.
Task:任务名.
Ip:用户IP地址.
当无法获取IP地址时,使用"**"记录.
例如通过Console口或Aux口登录用户的场景.
VpnName:VPN实例名称.
User:用户名.
当无法获取用户名时,使用"**"记录.
例如通过密码认证登录用户的场景.
","CMD/4/SCH_REBOOT","[Y/N]:用户选择的操作类型.
Task:任务名.
Ip:用户IP地址.
当无法获取IP地址时,使用"**"记录.
例如通过Console口或Aux口登录用户的场景.
VpnName:VPN实例名称.
User:用户名.
当无法获取用户名时,使用"**"记录.
例如通过密码认证登录用户的场景.
","1.
正常运行信息,无需处理.
""SCH_REBOOT","CMD_AUTO_UNLOCK","Theuserchose[Y/N]whendecidingwhethertorebootaccordingtotheschedule.
","4","用户选择是否依据定时设定执行重启.
","CMD/4/SCH_REBOOT_START","CFM/4/SAVE","CMD/4/SCH_REBOOT_START","1.

正常运行信息,无需处理.
""SCH_REBOOT_START","CMD_AUTO_UNLOCK","Scheduledrebootwillstart.
","4","定时重启任务开始.
","执行命令schedulereboot启动定时重启功能,设定的时间到后,记录该日志.
","无:无","CMD/4/SUPERLOGIN","1.
正常运行信息,无需处理.
""SUPERLOGIN","CMD_AUTO_UNLOCK","Userchangedlevel.
(User=[string],IpAddress=[string],Level=[USHORT],VpnName=[STRING],Times=[ULONG],LoginResult=[string])","4","通过命令行切换当前终端用户级别.
","User:用户名.
当设备无法获取用户名时,使用"**"记录.
例如通过密码认证登录用户的场景.
IpAddress:IP地址.
当设备无法获取IP地址时,使用"**"记录.
例如通过Console口或Aux口登录用户的场景.
VpnName:VPN实例名称.
Level:级别.
Times:登录次数.
LoginResult:登录成功或失败.
","CMD/4/SCH_REBOOT_FAIL","User:用户名.
当设备无法获取用户名时,使用"**"记录.
例如通过密码认证登录用户的场景.
IpAddress:IP地址.
当设备无法获取IP地址时,使用"**"记录.
例如通过Console口或Aux口登录用户的场景.
VpnName:VPN实例名称.
Level:级别.
Times:登录次数.
LoginResult:登录成功或失败.
","1.
正常运行信息,无需处理.
""SCH_REBOOT_FAIL","CMD_AUTO_UNLOCK","Scheduledrebootfailed.
","4","定时重启任务失败.
","执行命令schedulereboot启动定时重启功能,设定的时间到后,重启失败.
","无:无","ATK/4/FIREWALLATCK","1.
正常运行信息,无需处理.
""ATK","FIREWALLATCK","AttackType=[attack-type],slot=[slot_number],cpu=[cpu_id],receiveinterface=[receive-interface],proto=[protocol],src=[source-ip:source-port],dst=[dst-ip;dst-port],begintime=[begin-time],endtime=[end-time],totalpackets=[total-packets],maxspeed=[max-speed],User=[username],Action=[action]","4","设备检测到目的IP攻击而产生的攻击日志信息.
","attack_type:当前目标受到的攻击类型.
slot_number:消息源所在的设备槽位号.
cpu_id:消息源所在CPU的ID号.
receive-interface:流量入接口.
protocol:报文协议.
source-ip:source-port:攻击源IP地址和源端口.
dst-ip;dst-port:攻击目的IP地址和目的端口.
begin-time:攻击开始时间.
end-time:攻击结束时间.
total-packets:触发上报日志的报文数.
max-speed:触发攻击时的包速率,单位为pps.
username:用户的名称.
action:攻击防御的动作.
","攻击发生时,定时向日志服务器发送攻击日志信息(日志发送及发送间隔可控).
","ENGINE/2/THREADERR","1.
正常运行信息,无需处理.
""ENGINE","THREADERR","Theheartbeatoftheenginethreadwaslost.
(SyslogId=[syslog-id],ThreadId=[thread-index])","2","业务线程未向管理线上报心跳,管理线程检查到业务线程心跳丢失异常情况.
","syslog-id:日志序号.
thread-index:工作线程索引.
","原因1:业务线程死循环.
原因2:业务线程异常.
","1.
检查线程运行时状态,如CPU占用过高、死锁等情况是否发生.
","ETRUNK/4/MBR_PHYSTAT_CHG""ETRUNK","MBR_PHYSTAT_CHG","ThephysicalstatusofanE-Trunkmemberchanged.
(MemberType=[STRING],MemberId=[ULONG],State=[STRING])","4","成员物理状态改变.
","MemberType:成员类型,目前只有ETH-TRUNK.
MemberId:成员ID.
State:状态.
有两种取值·Up·Down","原因1:加入E-Trunk的成员(目前只有ETH-TRUNK类型)物理状态发生变化.
","ETRUNK/4/MEMBER_STATE_CHG","1.
正常运行信息,无需处理.
""MEMBER_STATE_CHG","MBR_PHYSTAT_CHG","ThestatusofanE-Trunkmemberchanged.
(MemberType=[STRING],MemberId=[ULONG],OldState=[STRING],OldReason=[STRING],NewState=[STRING],NewReason=[STRING])","4","E-Trunk成员状态改变.
","MemberType:成员类型,目前只有ETH-TRUNK.
MemberId:成员ID.
OldState:老状态.
·Backup:备用状态·Master:主用状态·Negot:协商状态OldReason:老状态原因.
·FORCE_BACKUP:强制备·FORCE_MASTER:强制主·ETRUNK_INIT:初始化·ETRUNK_BACKUP:E-Trunk为备·ETRUNK_MASTER:E-Trunk为主·PEER_MEMBER_DOWN:对端成员Down·PEER_MEMBER_UP:对端成员UpNewState:新状态.
·Backup:备用状态·Master:主用状态·Negot:协商状态NewReason:新状态原因.
·FORCE_BACKUP:强制备·FORCE_MASTER:强制主·ETRUNK_INIT:初始化·ETRUNK_BACKUP:E-Trunk为备·ETRUNK_MASTER:E-Trunk为主·PEER_MEMBER_DOWN:对端成员Down·PEER_MEMBER_UP:对端成员Up","原因1:E-Trunk成员状态或者状态原因改变,例如E-Trunk成员当前状态为主用,通过命令行将其工作模式设置为强制备用状态,此时成员状态会变为备用状态.
","ETRUNK/4/STATE_CHG","1.

正常运行信息,无需处理.
""STATE_CHG","MBR_PHYSTAT_CHG","ThestatusofanE-Trunkchanged.
(ETrunkId=[ULONG],OldState=[STRING],OldReason=[STRING],NewState=[STRING],NewReason=[STRING])","4","E-Trunk状态改变.
","ETrunkId:E-TrunkID.
OldState:老状态.
·Init:初始化状态·Backup:备用状态·Master:主用状态OldReason:老状态原因.
·PRI:优先级计算·TIMEOUT:超时·PEER_TIMEOUT:对端超时·INIT:初始化NewState:新状态.
·Init:初始化状态·Backup:备用状态·Master:主用状态NewReason:新状态原因.
·PRI:优先级计算·TIMEOUT:超时·PEER_TIMEOUT:对端超时·INIT:初始化","原因1:E-Trunk状态或者状态原因改变,例如E-Trunk当前状态为备用,如果在设定的超时时间内没有收到对端的协议报文,则E-Trunk状态会变为主用状态.
","FEEDBACK/3/CONNECTSERVERR","1.

正常运行信息,无需处理.
""FEEDBACK","CONNECTSERVERR","Failedtoconnecttothedatafeedbackserver.
(SyslogId=[syslog-id])","3","连接数据反馈服务器失败.
","syslog-id:日志序号.
","原因1:网络连接异常,与数据反馈服务器网络不通.
原因2:数据反馈服务器异常.
","1.
检查网络连接情况以及网络配置是否正确.
2.
如果依然不能解决问题,请联系技术支持工程师.
","FEEDBACK/3/GETSERVERR""GETSERVERR","CONNECTSERVERR","Failedtoobtaintheinformationfromthedatafeedbackserver.
(SyslogId=[syslog-id])","3","获取数据反馈服务器信息失败.
","原因1:网络连接异常,与安全中心平台网络不通.
原因2:安全中心平台异常.
","原因1:网络连接异常,与数据反馈服务器网络不通.
原因2:数据反馈服务器异常.
","FIBSPT/3/SPT_LOG","FEEDBACK/3/GETSERVERR""FIBSPT","SPT_LOG","[spt-log-info].
","3","SPT计算信息.
","[spt-log-info]:SPT计算的日志信息.
","FIB表内路由更新.
","FLOW6/4/FLOW6_SESS_NUM_BELOW_THRESHOLD","1.
正常运行信息,无需处理.
""FLOW6","FLOW6_SESS_NUM_BELOW_THRESHOLD","Totalnumberofipv6sessionsonSLOT[slot-id]CPU[cpu-id]is[session-number],lowerthanthresholdvalue[session-number-threshold].
","4","IPv6会话总数低于设置的告警阈值.
","slot-id:槽位号.
cpu-id:CPU号.
session-number:当前IPv6会话的总数.
session-number-threshold:IPv6会话总数的告警阈值.
","FLOW6/4/FLOW6_SESS_NUM_OVER_THRESHOLD","slot-id:槽位号.
cpu-id:CPU号.
session-number:当前IPv6会话的总数.
session-number-threshold:IPv6会话总数的告警阈值.
","1.
正常运行信息,无需处理.
""FLOW6_SESS_NUM_OVER_THRESHOLD","FLOW6_SESS_NUM_BELOW_THRESHOLD","Totalnumberofipv6sessionsonSLOT[slot-id]CPU[cpu-id]is[session-number],exceedingthresholdvalue[session-number-threshold].
","4","IPv6会话总数超过了设置的告警阈值.
","1.
检查网络中是否存在异常的IPv6流量.
","FLOW6/4/FLOW6_SESS_NUM_OVER_THRESHOLD","1.
检查网络中是否存在异常的IPv6流量.
","FLOW6/4/FLOW6_SESS_RATE_BELOW_THRESHOLD""FLOW6_SESS_RATE_BELOW_THRESHOLD","FLOW6_SESS_NUM_BELOW_THRESHOLD","Therateofcreatingipv6sessionsonSLOT[slot-id]CPU[cpu-id]is[session-rate],lowerthanthresholdvalue[session-rate-threshold].
","4","IPv6会话新建速率低于设置的告警阈值.
","slot-id:槽位号.
cpu-id:CPU号.
session-rate:当前IPv6会话的新建速率.
session-rate-threshold:IPv6会话新建速率的告警阈值.
","FLOW6/4/FLOW6_SESS_RATE_OVER_THRESHOLD","slot-id:槽位号.
cpu-id:CPU号.
session-rate:当前IPv6会话的新建速率.
session-rate-threshold:IPv6会话新建速率的告警阈值.
","1.
正常运行信息,无需处理.
""FLOW6_SESS_RATE_OVER_THRESHOLD","FLOW6_SESS_NUM_BELOW_THRESHOLD","Therateofcreatingipv6sessionsonSLOT[slot-id]CPU[cpu-id]is[session-rate],exceedingthresholdvalue[session-rate-threshold].
","4","IPv6会话新建速率超过了设置的告警阈值.
","FRAG/4/FRAG_PKT_EXCEED_THRESHOLD","FLOW6/4/FLOW6_SESS_RATE_OVER_THRESHOLD","FRAG/4/FRAG_PKT_EXCEED_THRESHOLD","FLOW6/4/FLOW6_SESS_RATE_BELOW_THRESHOLD""FRAG","FRAG_PKT_EXCEED_THRESHOLD","TotalnumberofcachedfragmentpacketonSLOT[slot_id]CPU[cpu_id]is[frag_pkt],exceedingthresholdvalue[thres_frag_pkt].
","4","缓存分片报文总数超过阈值.
","slot_id:槽位号.
cpu_id:CPU号.
frag_pkt:当前已经缓存的分片报文数量.
thres_frag_pkt:分片报文缓存阈值.
","当分片报文缓存的数量达到阈值时发送日志,在持续超出的情况下每隔30秒发送一次.
","1.
检查是否有大量异常的分片攻击报文.
","FRAG/4/FRAG_SESS_EXCEED_THRESHOLD""FRAG_SESS_EXCEED_THRESHOLD","FRAG_PKT_EXCEED_THRESHOLD","TotalnumberoffragmentsessiononSLOT[slot_id]CPU[cpu_id]is[frag_sess],exceedingthresholdvalue[thres_frag_sess].
","4","分片会话表项总数超过阈值.
","slot_id:槽位号.
cpu_id:CPU号.
frag_sess:当前分片会话数量.
thres_frag_sess:分片会话阈值.
","当分片会话的当前使用数量达到阈值时发送日志,在持续超出的情况下每隔30秒发送一次.
","FRAG6/4/FRAG6_SESS_EXCEED_THRESHOLD","FRAG/4/FRAG_SESS_EXCEED_THRESHOLD""FRAG6","FRAG6_SESS_EXCEED_THRESHOLD","TotalnumberofIPv6fragmentsessiononSLOT[slot_id]CPU[cpu_id]is[frag_sess],exceedingthresholdvalue[thres_frag_sess].
","4","IPv6分片会话表项总数超过阈值.
","slot_id:槽位号.
cpu_id:CPU号.
frag_sess:当前IPv6分片会话数量.
thres_frag_sess:IPv6分片会话阈值.
","当IPv6分片会话的当前使用数量达到阈值时发送日志,在持续超出的情况下每隔30秒发送一次.
","1.
检查是否有大量异常的IPv6分片攻击报文.
","FRAG6/4/FRAG6_PKT_EXCEED_THRESHOLD""FRAG6_PKT_EXCEED_THRESHOLD","FRAG6_SESS_EXCEED_THRESHOLD","TotalnumberofcachedIPv6fragmentpacketonSLOT[slot_id]CPU[cpu_id]is[frag_pkt],exceedingthresholdvalue[thres_frag_pkt].
","4","IPv6缓存分片报文超过阈值.
","slot_id:槽位号.
cpu_id:CPU号.
frag_pkt:当前已经缓存的IPv6分片报文数量.
thres_frag_pkt:IPv6分片报文缓存阈值.
","当IPv6分片报文缓存的数量达到阈值时发送日志,在持续超出的情况下每隔30秒发送一次.
","FTPS/5/ACL_DENY","FRAG6/4/FRAG6_PKT_EXCEED_THRESHOLD""FTPS","ACL_DENY","TheTCPrequestwasdeniedaccordingtoACLrules.
(IpAddress=[IpAddress],VpnInstanceName=[VpnInstanceName])","Whenbeingaskedwhethertocommitthecommand"undobulk-statenable",theuserchoseN.
","根据ACL规则限制,TCP请求被拒绝.
","IpAddress:客户端IP地址.
VpnInstanceName:VPN实例的名称.
","TCP请求不符合配置的ACL规则.
","1.
正常运行消息,无需处理.
","FTPS/4/FILE_OVERWRITE""FILE_OVERWRITE","ACL_DENY","Thefile[file-name]wasoverwritten.
(UserName=[STRING],IpAddress=[STRING],VpnInstanceName=[STRING]).
","4","FTP服务器中的文件被覆盖.
","file-name:服务器中的文件名称.
UserName:用户名.
IpAddress:用户的IP地址.
VpnInstanceName:VPN的实例名.
","用户向FTP服务器上传文件时,新上传的文件覆盖了服务器中的原有文件.
","FTPS/3/LOGINFAILED","1.
正常运行信息,无需处理.
""LOGINFAILED","ACL_DENY","Failedtologin.
(UserName="[string]",IpAddress=[string],VpnInstanceName="[string]",Reason="[string]")","3","FTP用户登录失败.
","UserName:用户名.
当设备无法获取用户名时,使用"**"记录.
例如通过密码认证登录用户的场景.
IpAddress:用户的IP地址.
VpnInstanceName:VPN的实例名.
Reason:登录失败的原因.
","1.
检查用户名和密码是否正确.
·如果用户名和密码不正确,请正确输入用户名和密码.
·如果用户名和密码正确,请收集日志信息和配置信息,并联系华为技术支持工程师.
","UserName:用户名.
当设备无法获取用户名时,使用"**"记录.
例如通过密码认证登录用户的场景.
IpAddress:用户的IP地址.
VpnInstanceName:VPN的实例名.
Reason:登录失败的原因.
","FTPS/5/LOGIN_OK""LOGIN_OK","ACL_DENY","Theusersucceededinlogin.
(UserName="[string]",IpAddress=[string],VpnInstanceName="[string]")","Whenbeingaskedwhethertocommitthecommand"undobulk-statenable",theuserchoseN.
","FTP用户登录成功.
","UserName:用户名.
IpAddress:用户的IP地址.
VpnInstanceName:VPN的实例名.
","FTPS/5/LOGOUT_OK","UserName:用户名.
IpAddress:用户的IP地址.
VpnInstanceName:VPN的实例名.
","1.
正常运行信息,无需处理.
""LOGOUT_OK","ACL_DENY","Theuserleft.
(UserName="[string]",IpAddress=[string],VpnInstanceName="[string]",Reason="[string]")","Whenbeingaskedwhethertocommitthecommand"undobulk-statenable",theuserchoseN.
","FTP用户离开.
","UserName:用户名.
IpAddress:用户的IP地址.
VpnInstanceName:VPN的实例名.
Reason:用户离开原因.
","FTPS/5/REQUEST","UserName:用户名.
IpAddress:用户的IP地址.
VpnInstanceName:VPN的实例名.
Reason:用户离开原因.
","1.
正常运行信息,无需处理.
""REQUEST","ACL_DENY","Theuserhadarequest.
(UserName="[string]",IpAddress=[string],VpnInstanceName="[string]",Request=[string],Result=[string]","Whenbeingaskedwhethertocommitthecommand"undobulk-statenable",theuserchoseN.
","用户有请求.
","UserName:用户名.
IpAddress:用户登录IP地址.
VpnInstanceName:VPN的实例名.
Request:用户请求,如"PASS".
Result:Request报文的处理结果:·Success·ExecutionFailure","FTP用户登录成功后对FTP服务器有请求.
","FTPS/3/TRS_FAIL","1.
正常运行信息,无需处理.
""TRS_FAIL","ACL_DENY","Theuserfailedtotransferdata.
(UserName="[string]",IpAddress=[string],VpnInstanceName="[string]",Reason="[string]")","3","FTP用户传输失败.
","UserName:用户名.
IpAddress:用户的IP地址.
VpnInstanceName:VPN的实例名.
Reason:文件传输失败原因.
","1.
检查传输的连接是否正常,能否ping通,如果网络连接正常但传输仍然失败,请联系华为技术支持工程师.
","UserName:用户名.
IpAddress:用户的IP地址.
VpnInstanceName:VPN的实例名.
Reason:文件传输失败原因.
","FTPS/5/TRANSFER_FINISH""TRANSFER_FINISH","ACL_DENY","Finishedtotransferfile.
(FileName=[STRING],UserName=[STRING],IpAddress=[STRING],VpnInstanceName=[STRING],Transferlength=[ULONG],ActionType=[STRING])","Whenbeingaskedwhethertocommitthecommand"undobulk-statenable",theuserchoseN.
","文件传输完成.
","FileName:传输文件名.
UserName:用户名.
IpAddress:用户登录IP地址.
VpnInstanceName:VPN的实例名.
Transferlength:传输数据的长度.
ActionType:操作类型:·上传文件·下载文件","通过FTP传输文件结束.
","FWD/4/SESSCTRLBEGIN","1.
正常运行信息,无需处理.
""FWD","SESSCTRLBEGIN","Sessioncreationcontrolstarted.
TheCPUusagewas[cpu-usage],andthesessionratewas[session-rate].
","4","记录会话抑制开始事件.
","cpu-usage:CPU使用率.
session-rate:会话速率.
","CPU使用率较高,达到会话抑制设置的CPU阈值.
","1.
如果此日志少量出现,等待一段时间后,如果恢复正常,则无需处理.
2.
如果此日志大量出现,请联系华为技术支持工程师.
","FWD/4/SESSCTRLEND""SESSCTRLEND","SESSCTRLBEGIN","Sessioncreationcontrolended.
TheCPUusagewas[cpu-usage].
Intheprocess,[permitted-packets-num]packetswerepermittedand[blocked-packets-num]packetswereblocked.
","4","记录会话抑制结束事件.
","cpu-usage:CPU使用率.
permitted-packets-num:会话抑制周期通过的报文包的个数.
blocked-packets-num:会话抑制周期阻断的报文包的个数.
","CPU使用率降到会话抑制设置的CPU使用率,会话抑制周期结束.
","FWD/4/SESSINSERTOVERLOAD","1.
正常运行信息,无需处理.
""SESSINSERTOVERLOAD","SESSCTRLBEGIN","Abnormaltrafficwasdetected.
(Vsys=[vsysname],VLAN=[vlan],Protocol=[protocal],SourceIP=[source-ip],SourcePort=[source-port],DestinationIP=[destination-ip],DestinationPort=[destination-port])","4","会话表上出现了超过20个相同五元组的会话表项.
","vsysname:虚拟系统名称.
vlan:VLANID.
protocal:协议名称.
source-ip:报文的源IP地址.
source-port:报文的源端口.
destination-ip:报文的目的IP地址.
destination-port:报文的目的端口.
","收到相同五元组的syn-flood攻击.
","1.
屏蔽攻击源,开启攻击防范.
","FWD/4/TOPNSESSDST""TOPNSESSDST","SESSCTRLBEGIN","InformationabouttopNsessionsbydestinationIPaddresswasrecorded.
(SlotID=[slot-id],CPUID=[cpu-id],Details="IP:[ip-address]Sessionnum:[sessionnumber]")","4","当CPU使用率或者会话使用率超过告警阈值时,通过统计基于目的IP地址的TOP10会话.
可以帮助用户及时了解当前哪些目的IP地址的会话数量最大,根据这些信息可以分析这些会话是否正常,便于攻击溯源.
","slot-id:槽位号.
cpu-id:CPU号.
Details:基于目的IP地址的TOP10对应的会话数量.
","当CPU使用率超过cpu-usagethreshold设置的threshold-value告警阈值时,系统会发送此日志进行提示.
当会话使用率超过snmp-agentsessiontrapthreshold设置的threshold-value会话告警阈值时,系统会发送此日志进行提示.
","1.
根据系统发送的日志,查看基于目的地址的TOP10会话信息,及时阻止攻击行为.
","FWD/4/TOPNSESSSRC""TOPNSESSSRC","SESSCTRLBEGIN","InformationabouttopNsessionsbysourceIPaddresswasrecorded.
(SlotID=[slot-id],CPUID=[cpu-id],Details="IP:[ip-address]Sessionnum:[sessionnumber]")","4","当CPU使用率或者会话使用率超过告警阈值时,通过统计基于源IP地址的TOP10会话,可以帮助用户及时了解当前哪些源IP地址的会话数量最大,根据这些信息可以分析这些会话是否正常,便于攻击溯源.
","slot-id:槽位号.
cpu-id:CPU号.
Details:基于源IP地址的TOP10对应的会话数量.
","1.
根据系统发送的日志,查看基于源IP地址的TOP10会话信息,及时阻止攻击行为.
","1.
根据系统发送的日志,查看基于目的地址的TOP10会话信息,及时阻止攻击行为.
","FWLCNS/1/EXPIRED""FWLCNS","EXPIRED","1","Licenseexceedstheauthorizedperiodandthetrialperiod!
","系统时间超过License文件中的运行截止日期且超过试用天数.
","定期的时间校验中检测到系统时间超过License文件中的运行截止日期且超过试用天数.
","无:无","1.
License控制项已经被恢复默认配置,需立即更换新的License文件.
","FWLCNS/1/TRIAL""TRIAL","EXPIRED","Licenseexceedstheauthorizedperiodbutwithin[remain-days]trialday(s)!
","Licenseexceedstheauthorizedperiodandthetrialperiod!
","系统时间超过License文件中的运行截止日期,但尚未超过试用天数.
","remain-days:试用期剩余天数.
","定期的时间校验中检测到系统时间超过License文件中的运行截止日期但仍在试用天数内.
","1.
License控制项可正常使用,仍然保持现有配置,但需立即更换新的License文件,以免过期影响使用.
","FWLCNS/1/TRIALFINISH""TRIALFINISH","EXPIRED","Thelicensetrialperiodhasexpired!
","Licenseexceedstheauthorizedperiodandthetrialperiod!
","License试用期已结束.
","1.
购买并激活License,以免影响使用.
","无:无","1.
购买并激活License,以免影响使用.
","FWLCNS/1/TRIALWILLFINISH""TRIALWILLFINISH","EXPIRED","Thelicensetrialperiodisabouttoexpirein[remainingdays]day(s)!
","Licenseexceedstheauthorizedperiodandthetrialperiod!
","License试用期即将到期.
","remainingdays:到期前剩余天数.
","1.
购买并激活License,以免到期影响使用.
","remainingdays:到期前剩余天数.
","FWLCNS/1/WILLEXPIRE""WILLEXPIRE","EXPIRED","Licenseisabouttoexpirein[remain-days]day(s)!
","Licenseexceedstheauthorizedperiodandthetrialperiod!
","系统时间即将在10天内超过License文件中的运行截止日期.
","remain-days:过期前剩余天数.
","定期的时间校验中检测到系统时间将在10天内超过License文件中的运行截止时间.
","1.
License控制项可正常使用,仍然保持现有配置,但需尽快更换新的License文件,以免过期影响使用.
","FWLCNS/4/ACTIVATIONFAIL""ACTIVATIONFAIL","EXPIRED","Failedtoactivatethelicensefile.
(AccessType=[access-type],Ip=[ip-address],UserName=[user-name])","4","License文件激活失败.
","access-type:登录类型.
ip-address:IP地址.
user-name:用户名.
","1.
执行命令displaylicense,检查License文件是否存在或过期.
2.
在Web界面的面板上查看设备的ESN与License文件的信息是否一致.
3.
检查设备与License文件的版本是否一致.
4.
如果以上均不能解决问题,请联系华为技术支持工程师.
","access-type:登录类型.
ip-address:IP地址.
user-name:用户名.
","FWLCNS/5/ACTIVATION""ACTIVATION","EXPIRED","Succeededinactivatingthelicensefile.
(AccessType=[access-type],Ip=[ip-address],UserName=[user-name])","Whenbeingaskedwhethertocommitthecommand"undobulk-statenable",theuserchoseN.
","成功激活License文件.
","License文件激活成功.
","1.
执行命令displaylicense,检查License文件是否存在或过期.
2.
在Web界面的面板上查看设备的ESN与License文件的信息是否一致.
3.
检查设备与License文件的版本是否一致.
4.
如果以上均不能解决问题,请联系华为技术支持工程师.
","1.
激活操作成功提示,注意随后保存配置.
","GPM/3/BUILDFAIL""GPM","BUILDFAIL","Failedtocompilethedatabase.
(SyslogId=[syslog-id],DatabaseId=[database-index],Algorithm=[algorithm-type],DatabaseStatus=[database-status])","3","数据库编译失败.
","syslog-id:日志序号.
database-index:数据库的序号.
algorithm-type:使用的算法类型,包括ac、srs、cavium-hfa和pcre-compatible.
database-status:数据库状态,包括:·compiling:表示数据库正在编译.
·invalid:表示数据库无效.
","原因1:预编译内存不够.
原因2:临时内存申请失败.
","1.
调整GPM内存分配值.
","GPM/4/DBMEMEXT""DBMEMEXT","BUILDFAIL","Thedatabaseusedtoomuchmemory.
(SyslogId=[syslog-id],DatabaseId=[database-index],Algorithm=[algorithm-type],DatabaseStatus=[database-status],MemorySize=[memory-size])","4","GPM模块某一个状态机占用内存过大,并输出内存值.
","syslog-id:日志序号.
database-index:数据库的序号.
algorithm-type:使用的算法类型,包括ac、srs、cavium-hfa和pcre-compatible.
database-status:数据库状态,包括:·compiling:表示数据库正在编译.
·invalid:表示数据库无效.
memory-size:数据库占用的内存.
","状态机内存过大.
对于非正则模式,原因是模式数量过多;对于正则模式,原因是正则表达式过于复杂.
","HA/5/BATCHSTART","BGP/6/RECV_NOTIFY""HA","BATCHSTART","Batchbackupstarted.
","Whenbeingaskedwhethertocommitthecommand"undobulk-statenable",theuserchoseN.
","备板批量备份开始.
","HA/6/RESTART","无:无","HA/6/RESTART","1.
正常运行信息,无需处理.
""RESTART","BATCHSTART","Whendecidingwhethertorestartslaveboard,theuser[user-name]choose[STRING].
","6","用户确认是否重启备板.
","[user-name]:用户名.
[STRING]:表示用户确认的字符.
Y:表示用户确认操作.
N:表示用户取消操作.
","用户执行slaveswitchover命令后,需要再次确认.
","HA/5/RESTSLA","1.
正常运行信息,无需处理.
""RESTSLA","BATCHSTART","Rebootedtheslaveboard.
(Slot=[STRING])","Whenbeingaskedwhethertocommitthecommand"undobulk-statenable",theuserchoseN.
","重起备板.
","Slot:备板槽号","HA提供给产品的钩子函数.
","1.
重启备板.
","HA/5/RSTSLA""RSTSLA","BATCHSTART","Rebootedtheslaveboard,becausethemessagesinthequeueweretoomuch.
(Slot=[STRING])","Whenbeingaskedwhethertocommitthecommand"undobulk-statenable",theuserchoseN.
","消息队列满,重发多次失败.
","Slot:备板槽号","HA提供给产品的钩子函数.
","1.
消息队列满,重发多次失败,重启备板.
","HA/4/SMOTHINGSLAINS""SMOTHINGSLAINS","BATCHSTART","Theslaveboardwasinsertedwhenmasterboardwassmoothing.
","4","主备倒换后,处理平滑状态的主板收到备板在位的消息,将重启备板.
","1.
如果平滑等待时间太长,这个时候如果插入备板,会上报此消息,不影响正常流程的处理.
如果备板上报的次数超过200次,备板将自动复位.
","无:无","1.
如果平滑等待时间太长,这个时候如果插入备板,会上报此消息,不影响正常流程的处理.
如果备板上报的次数超过200次,备板将自动复位.
","HA/6/SWITCHOVER""SWITCHOVER","BATCHSTART","Whendecidingwhethertoswitchslavetomaster,theuser[user-name]choose[STRING].
","6","用户确认是否进行主备倒换.
","HA/4/UPDATELCS","用户执行slaveswitchover命令后,需要再次确认.
","HA/5/RESTSLA","1.
正常运行信息,无需处理.
""UPDATELCS","BATCHSTART","Slaveboardwasupdatedwithmasterboard'sLicensefile,andrebootstheslaveboardnow.
","4","备板License更新完毕,需要重启备板.
","备板PAFLicense更新完毕,需要重启备板.
","无:无","1.
主备license不一致,更新完备板的license后,备板将重启.
","HA/4/UPDATEPAF""UPDATEPAF","BATCHSTART","ThePAFfileoftheslaveboardwasupdatedalongwiththatofthemasterboardandtheslaveboardwasrestarted.
","4","更新备板PAF完毕,重启备板.
","更新备板PAF完毕.
","无:无","1.
主备的paf不一致,更新完备板的paf后,备板将重启.
","HA/4/VERDIFF""VERDIFF","BATCHSTART","Theversionofmasterandslaveboardisdifferent.
","4","主备板版本不一致.
","1.
主备版本不一致,但是不重启备板.
","无:无","1.
主备版本不一致,但是不重启备板.
","HA/4/VERWRNRST""VERWRNRST","BATCHSTART","Theslaveboardwasrebootedandwilldownloadthenewimagebecauseofdifferentversionofmasterboardandslaveboard.
","4","备板版本与主板不一致,复位版本并重新下载镜像.
","备板版本与主板不一致.
","无:无","1.
主备版本不一致,复位备板.
","HARDDISK/3/ADDPLUGTMRFAIL""HARDDISK","ADDPLUGTMRFAIL","Failedtocreateinsertiondetectiontimerfordisk[disk-id].
","3","硬盘插入时,检测硬盘的定时器创建失败.
","disk-id:安装硬盘的槽位号.
","系统资源不足,硬盘插入时,检测硬盘的定时器创建失败.
","1.
重新拔插硬盘.
","HARDDISK/3/ADDPWRTMRFAIL""ADDPWRTMRFAIL","ADDPLUGTMRFAIL","Failedtocreatepower-offdelaytimerfordisk[disk-id].
","3","硬盘下电时,延时定时器创建失败.
","系统资源不足,硬盘下电时,延时定时器创建失败.
","系统资源不足,硬盘插入时,检测硬盘的定时器创建失败.
","HARDDISK/3/ADDREMOVTMRFAIL","HARDDISK/3/ADDPWRTMRFAIL""ADDREMOVTMRFAIL","ADDPLUGTMRFAIL","Failedtocreateremovaldetectiontimerfordisk[disk-id].
","3","硬盘拔出时,检测硬盘的定时器创建失败.
","系统资源不足,硬盘拔出时,检测硬盘的定时器创建失败.
","系统资源不足,硬盘插入时,检测硬盘的定时器创建失败.
","HARDDISK/3/AUTHFAIL","HARDDISK/3/ADDPWRTMRFAIL""AUTHFAIL","ADDPLUGTMRFAIL","Disk[disk-id](SN=[disk-number])isnotsupported.
","3","硬盘认证失败.
","disk-id:安装硬盘的槽位号.
disk-number:硬盘序列号.
","硬盘是非正规渠道获取的.
","1.
请使用华为出厂的配套本设备的硬盘.
","HARDDISK/3/CMDEXCFAIL""CMDEXCFAIL","ADDPLUGTMRFAIL","Commandexecutionfailedbecauseofself-test.
","3","硬盘自检期间,命令不能下发.
","硬盘自检中,不能执行非自检相关的命令.
","无:无","1.
如果需要立即执行相关命令,请先停止自检.
","HARDDISK/3/DELPLUGTMRFAIL""DELPLUGTMRFAIL","ADDPLUGTMRFAIL","Failedtodeleteinsertiondetectiontimerfordisk[disk-id].
","3","硬盘插入时,检测定时器删除失败.
","系统资源不足,硬盘插入时,检测定时器删除失败.
","系统资源不足,硬盘插入时,检测硬盘的定时器创建失败.
","HARDDISK/3/DELREMOVTMRFAIL","HARDDISK/3/ADDPWRTMRFAIL""DELREMOVTMRFAIL","ADDPLUGTMRFAIL","Failedtodeleteremovaldetectiontimerfordisk[disk-id].
","3","硬盘拔出时,检测硬盘定时器删除失败.
","系统资源不足,硬盘拔出时,检测硬盘定时器删除失败.
","系统资源不足,硬盘插入时,检测硬盘的定时器创建失败.
","HARDDISK/3/FORMATFAIL","HARDDISK/3/ADDPWRTMRFAIL""FORMATFAIL","ADDPLUGTMRFAIL","Disk(s)formattingfailed.
","3","硬盘格式化失败.
","由于设备内存不足或硬盘故障等原因,导致硬盘格式化失败.
","无:无","1.
重新格式化硬盘.
","HARDDISK/3/FWUPDATEFAIL""FWUPDATEFAIL","ADDPLUGTMRFAIL","Failedtoloadthefirmwaretothedisk[disk-id](SN=[disk-number]).
","3","Firmware升级失败.
","1.
执行升级Firmware命令,重新对Firmware升级.
2.
如果无法升级,请联系技术支持工程师.
","硬盘是非正规渠道获取的.
","1.
执行升级Firmware命令,重新对Firmware升级.
2.
如果无法升级,请联系技术支持工程师.
","HARDDISK/3/IOCFWUPDATEFAIL""IOCFWUPDATEFAIL","ADDPLUGTMRFAIL","FailedtoloadtheIOcontrollerfirmware.
","3","硬盘IO控制器Firmware升级失败.
","1.
重新执行升级命令,对IO控制器升级.
","无:无","1.
重新执行升级命令,对IO控制器升级.
","HARDDISK/3/IOCOFFDISK""IOCOFFDISK","ADDPLUGTMRFAIL","Thedisk[disk-id](SN=[disk-number])isdisabled.
","3","硬盘退出当前系统.
","硬盘故障,退出当前系统.
","硬盘是非正规渠道获取的.
","1.
将硬盘返厂检查硬盘故障原因,或更换硬盘.
","HARDDISK/3/OFLFAIL""OFLFAIL","ADDPLUGTMRFAIL","Disk(s)failedtogooffline.
","3","硬盘下线失败.
","原因1:业务不响应offline消息.
原因2:offline消息发送失败.
","无:无","1.
重新执行diskoffline命令.
","HARDDISK/3/ONLINEFAIL""ONLINEFAIL","ADDPLUGTMRFAIL","Disk(s)failedtogoonline.
","3","硬盘上线失败.
","建立RAID失败后,或者未建立RAID,执行diskonline给硬盘上线.
","无:无","1.
执行命令resetraid删除或者重建RAID.
","HARDDISK/3/PLIMSGFAIL""PLIMSGFAIL","ADDPLUGTMRFAIL","Failedtosenddisk[disk-id]insertionmessage.
","3","硬盘插入信息发送失败.
","1.
重新插拔硬盘.
","系统资源不足,硬盘插入时,检测硬盘的定时器创建失败.
","1.
重新插拔硬盘.
","HARDDISK/3/REBOOTE""REBOOTE","ADDPLUGTMRFAIL","Errorsweredetectedduringtheself-test.
Pleaserebootthesystem.
","3","硬盘自检结束,检查到错误,请重启设备.
","硬盘错误导致自检完成.
","无:无","1.
执行命令reboot重启设备.
","HARDDISK/3/REMOVMSGFAIL""REMOVMSGFAIL","ADDPLUGTMRFAIL","Failedtosenddisk[disk-id]removalmessage.
","3","硬盘拔出信息发送失败.
","HARDDISK/3/SELFTESTFAIL","系统资源不足,硬盘插入时,检测硬盘的定时器创建失败.
","HARDDISK/3/SELFTESTFAIL","HARDDISK/3/ADDPWRTMRFAIL""SELFTESTFAIL","ADDPLUGTMRFAIL","Disk(s)self-testfailed.
","3","硬盘自检失败.
","硬盘读写业务停止失败,不允许自检.
","无:无","1.
执行diskoffline命令,或者重启设备后重新开始自检.
","HARDDISK/4/ACTDISK""ACTDISK","ADDPLUGTMRFAIL","Pleaseusethe"1:diskoffline2:resetraid[PRIMARY-DISK{0|1}]3:diskonline"commandtothenewdisktakeeffect.
","4","使用命令diskoffline、resetraid、diskonline命令重置硬盘RAID,启用新盘.
","设备上已经有一个硬盘,又插入了一块新盘.
","无:无","1.
按照提示进行操作.
","HARDDISK/4/DISKSIZEDIFF""DISKSIZEDIFF","ADDPLUGTMRFAIL","PleaseusetwodiskswiththesamesizeforRAID.
","4","请使用两块相同容量的硬盘构建RAID.
","设备上存在不同容量的硬盘同时在位.
","无:无","1.
请将不同容量的硬盘更换成相同容量的硬盘.
","HARDDISK/4/FAILUREALM""FAILUREALM","ADDPLUGTMRFAIL","Disk[disk-id]failureprediction(asc=[asc-number],ascq=[ascq-number],SN=[disk-number]).
","4","硬盘预失效.
","disk-id:安装硬盘的槽位号.
asc-number:ASC寄存器值.
ascq-number:ASCQ寄存器值.
disk-number:硬盘序列号.
","1.
更换硬盘.
","disk-id:安装硬盘的槽位号.
asc-number:ASC寄存器值.
ascq-number:ASCQ寄存器值.
disk-number:硬盘序列号.
","HARDDISK/4/FORCEOFFLINE""FORCEOFFLINE","ADDPLUGTMRFAIL","Pleasemakealldisksgoofflinefirst.
","4","系统提示用户先给硬盘下线.
","硬盘正常使用的时候执行resetraid命令删除或重建硬盘RAID.
","无:无","1.
按照提示执行命令diskoffline给硬盘下线.
","HARDDISK/4/FORMATFSINUSE""FORMATFSINUSE","ADDPLUGTMRFAIL","Pleasemakealldisk(s)goofflinefirstbeforediskformatting.
","4","硬盘格式化前请先给硬盘下线.
","硬盘没有下线,就进行格式化操作.
","无:无","1.
确保硬盘下线了,才能执行格式化操作.
","HARDDISK/4/FORMATNOMEM""FORMATNOMEM","ADDPLUGTMRFAIL","Pleasereserveenoughmemoryfordiskformatting.
","4","请确保硬盘格式化时有足够内存.
","格式化硬盘时,内存不足.
","无:无","1.
请确保硬盘格式化时有足够内存,再格式化硬盘.
","HARDDISK/4/FORMATSUCC""FORMATSUCC","ADDPLUGTMRFAIL","Disk(s)formattingsucceeded.
","4","硬盘格式化成功.
","HARDDISK/4/FWUPDATEOK","无:无","HARDDISK/4/FWUPDATEOK","1.
正常运行信息,无需处理.
""FWUPDATEOK","ADDPLUGTMRFAIL","Firmwareupgradesucceeded.
Newfirmwarewilltakeeffectseveralminuteslater.
","4","Firmware升级成功,将会在几分钟后生效.
","Firmware升级成功.
","无:无","HARDDISK/4/IOCFWUPDATEOK","1.
正常运行信息,无需处理.
""IOCFWUPDATEOK","ADDPLUGTMRFAIL","IOcontrollerfirmwareupgradesucceeded.
","4","硬盘IO控制器Firmware升级成功.
","HARDDISK/4/NODISK","无:无","HARDDISK/4/NODISK","1.
正常运行信息,无需处理.
""NODISK","ADDPLUGTMRFAIL","Nodiskpresent,ornodiskisavailable.
","4","无硬盘在位,或者所有硬盘都不可使用.
","原因1:设备没有插入硬盘.
原因2:硬盘没有认证通过.
原因3:硬盘故障,无法读写.
","无:无","1.
原因1:插入硬盘.
2.
原因2:更换认证通过的硬盘.
3.
原因3:更换能正常读写的硬盘.
","HARDDISK/4/OFLSYNC""OFLSYNC","ADDPLUGTMRFAIL","Disk(s)wentofflinesuccessfully(Backgroundsyncing:Remaining[percent]%).
","4","硬盘下线成功,后台正在进行数据同步.
","percent:硬盘数据同步进度.
","硬盘在数据同步过程中,使用命令diskoffline给硬盘下线.
","1.
按照提示等待硬盘完成数据同步.
","HARDDISK/4/ONLINECOMMAND""ONLINECOMMAND","ADDPLUGTMRFAIL","Pleaseusethe"diskonline"commandtomakedisk(s)takeeffect.
","4","重置硬盘RAID后,系统提醒用户进行上线操作.
","用户执行resetraid命令,重置硬盘RAID.
","无:无","1.
执行diskonline给硬盘上线.
","HARDDISK/4/PLUGIN""PLUGIN","ADDPLUGTMRFAIL","Thedisk[disk-id]ispluggedin.
","4","硬盘插入设备.
","HARDDISK/4/PLUGOUT","系统资源不足,硬盘插入时,检测硬盘的定时器创建失败.
","HARDDISK/4/PLUGOUT","1.

正常运行信息,无需处理.
""PLUGOUT","ADDPLUGTMRFAIL","Thedisk[disk-id]isremoved.
","4","硬盘被拔出.
","HARDDISK/4/REBOOTNOTE","系统资源不足,硬盘插入时,检测硬盘的定时器创建失败.
","HARDDISK/4/REBOOTNOTE","1.

正常运行信息,无需处理.
""REBOOTNOTE","ADDPLUGTMRFAIL","Self-testcompleted.
Pleaserebootyoursystem.
","4","硬盘自检结束,请重启设备.
","硬盘自检结束.
","无:无","HARDDISK/4/REMOVABLE","HARDDISK/3/REMOVMSGFAIL""REMOVABLE","ADDPLUGTMRFAIL","Alldisk(s)areremovable.
","4","硬盘可以安全移除.
","用户执行diskoffline命令成功.
","无:无","1.
可执行硬盘移除操作.
","HARDDISK/4/RESETRAID""RESETRAID","ADDPLUGTMRFAIL","Pleaseusethe"resetraid[PRIMARY-DISK{0|1}]"commandtoresetRAID.
","4","请使用命令resetraid命令删除或重置硬盘RAID.
","设备上插入的硬盘有RAID信息,或插入的硬盘不合法.
","无:无","1.
使用命令resetraid删除或重建硬盘RAID.
","HARDDISK/4/SELFTESTING""SELFTESTING","ADDPLUGTMRFAIL","Disk(s)self-teststarts.
Itmaytakeseveralhours.
Pleasewait.
","4","硬盘自检开始,需要几个小时,请耐心等待.
","硬盘开始自检.
","无:无","1.
等待硬盘自检结束后重启设备.
","HARDDISK/4/TEMPEHIGH""TEMPEHIGH","ADDPLUGTMRFAIL","Thedisk[disk-id]temperatureistoohigh(CurrentTemperature=[current-temperature]degreecentigrade,ReferenceTemperature=[referenceTemperature]degreecentigrade).
","4","硬盘温度告警.
","disk-id:安装硬盘的槽位号.
current-temperature:硬盘当前温度.
referenceTemperature:硬盘参考温度.
","硬盘温度过高.
","1.
给风扇调速或降低环境温度.
","HARDDISK/4/TOOFFLINE""TOOFFLINE","ADDPLUGTMRFAIL","Disk(s)willtakeafewsecondstogooffline,pleasewait.
","4","硬盘下线需要等待一段时间,请稍候.
","原因1:执行diskoffline,给硬盘下线.
原因2:硬盘正在进行自检.
","无:无","1.
等待硬盘下线.
","HARDDISK/5/ONLINESUCC""ONLINESUCC","ADDPLUGTMRFAIL","Disk(s)wentonlinesuccessfully.
","Whenbeingaskedwhethertocommitthecommand"undobulk-statenable",theuserchoseN.
","硬盘上线操作成功.
","建立RAID成功后,执行diskonline命令给硬盘上线.
","无:无","HARDDISK/5/TOONLINE","1.
正常运行信息,无需处理.
""TOONLINE","ADDPLUGTMRFAIL","Disk(s)willtakeafewsecondstogoonline,pleasewait.
","Whenbeingaskedwhethertocommitthecommand"undobulk-statenable",theuserchoseN.
","硬盘上线过程中,文件系统修复可能消耗大量时间,提醒用户等待一段时间.
","用户执行diskonline命令给硬盘上线.
","无:无","1.
等待硬盘上线结束提示.
","HARDDISK/6/ONLINE""ONLINE","ADDPLUGTMRFAIL","Disk(s)alreadygoonline.
","6","硬盘已经上线.
","硬盘完成上线后,用户再次执行diskonline命令给硬盘上线.
","无:无","1.
不需要再执行diskonline命令.
","HQOS/4/SQRESNOTENOUGH""HQOS","SQRESNOTENOUGH","Theresourceofuser-queueonslot[slot-id]isusedup.
","4","接口板上的user-queue资源不足.
","slot-id:槽位号.
","1.
联系华为工程师进行处理.
","slot-id:槽位号.
","HQOS/7/GQRSRELREQINVALID""GQRSRELREQINVALID","SQRESNOTENOUGH","7","TherequestofreleasingGQ'sresourceisinvalid.
(Position:PrivateSlot=[slot-id],Direction=[direction];Releaser:ModuleId=0x[moduleid];Expected:GqIdNumber=[expected-gqidnumber];Hold:GqIdNumber=[hold-gqidnumber])","释放GQ资源的请求无效.
","slot-id:槽位号.
direction:方向.
moduleid:模块编号.
expected-gqidnumber:期望释放的GQID数.
hold-gqidnumber:已经拥有的GQID数.
","原因1:某个模块对GQ资源存在多释放的可能.
原因2:某个模块对GQ资源存在重复释放的可能.
","1.
记录模块编号,联系华为工程师进行处理.
","HQOS/7/SQRSRELREQINVALID""SQRSRELREQINVALID","SQRESNOTENOUGH","TherequestofreleasingSQ'sresourceisinvalid.
(Position:PrivateSlot=[slot-id],Direction=[direction];Releaser:ModuleId=0x[moduleid];Expected:SqIdNumber=[expected-sqidnumber],Cir=[expected-cir]K,Pir=[expected-pir]K;Hold:SqIdNumber=[hold-sqidnumber],Cir=[hold-cir]K,Pir=[hold-pir]K)","TherequestofreleasingGQ'sresourceisinvalid.
(Position:PrivateSlot=[slot-id],Direction=[direction];Releaser:ModuleId=0x[moduleid];Expected:GqIdNumber=[expected-gqidnumber];Hold:GqIdNumber=[hold-gqidnumber])","释放SQ资源的请求无效.
","slot-id:槽位号.
direction:方向.
moduleid:模块编号.
expected-sqidnumber:期望释放的SQID数.
expected-cir:期望释放的CIR数.
expected-pir:期望释放的PIR数.
hold-sqidnumber:已经拥有的SQID数.
hold-cir:已经拥有的CIR数.
hold-pir:已经拥有的PIR数.
","原因1:某个模块对SLOT级SQ资源存在多释放的可能.
原因2:某个模块对SLOT级SQ资源存在重复释放的可能.
","HQOS/7/TBSQRSRELREQINVALID","HQOS/7/SQRSRELREQINVALID""TBSQRSRELREQINVALID","SQRESNOTENOUGH","TherequestofreleasingSQ'sresourceisinvalid.
(Position:PrivateTb=[tb-id],Direction=[direction];Releaser:ModuleId=0x[moduleid];Expected:SqIdNumber=[expected-sqidnumber],Cir=[expected-cir]K,Pir=[expected-pir]K;Hold:SqIdNumber=[hold-sqidnumber],Cir=[hold-cir]K,Pir=[hold-pir]K)","TherequestofreleasingGQ'sresourceisinvalid.
(Position:PrivateSlot=[slot-id],Direction=[direction];Releaser:ModuleId=0x[moduleid];Expected:GqIdNumber=[expected-gqidnumber];Hold:GqIdNumber=[hold-gqidnumber])","tb-id:TB号.
direction:方向.
moduleid:模块编号.
expected-sqidnumber:期望释放的SQID数.
expected-cir:期望释放的CIR数.
expected-pir:期望释放的PIR数.
hold-sqidnumber:已经拥有的SQID数.
hold-cir:已经拥有的CIR数.
hold-pir:已经拥有的PIR数.
","slot-id:槽位号.
direction:方向.
moduleid:模块编号.
expected-sqidnumber:期望释放的SQID数.
expected-cir:期望释放的CIR数.
expected-pir:期望释放的PIR数.
hold-sqidnumber:已经拥有的SQID数.
hold-cir:已经拥有的CIR数.
hold-pir:已经拥有的PIR数.
","原因1:某个模块对TB级SQ资源存在多释放的可能.
原因2:某个模块对TB级SQ资源存在重复释放的可能.
","HRPI/2/DOWN","HQOS/7/SQRSRELREQINVALID""HRPI","DOWN","HRPlinkchangestodowndueto[reason].
","2","HRP链路状态变为down及其原因.
","[reason]:链路中断原因,包括以下几种情况:·heartbeatlostforxxxcycles·senddatafailed·peernotified·commanddisable","HRP链路中断,可能原因有:心跳丢失、发送报文失败、对端通知(连接断开)、功能关闭.
","1.
需要检查两端设备运行是否正常,或者心跳线是否有故障.
","HRPI/2/ENCRYPT_KEY""ENCRYPT_KEY","DOWN","TheencryptionkeyforHRPbackupchannelsisdifferentwithpeerdevice","2","双机热备组网中,主备设备上备份配置命令的加密密钥不一致.
","主备设备上备份配置命令的加密密码不一致.
","无:无","1.
执行命令hrpencryption-key,配置主、备设备间加密配置命令备份报文的密钥为一致.
","HRPI/4/COCHK""COCHK","DOWN","Theconfigurationsbetweenmasterandslavedeviceisdifferent(different-configuration-name).
","4","双机热备配置一致性检查发现主备NIP配置不一致.
","different-configuration-name:主备防火墙配置不一致的具体特性名称,可能有如下取值:·audit-policy:审计策略配置不一致.
·auth-policy:认证策略配置不一致.
·nat-policy:NAT策略配置不一致.
·security-policy:安全策略配置不一致.
·traffic-policy:带宽策略配置不一致.
·hrp:HRP配置不一致.
·interface-typeinterface-number:接口配置不一致.
interface-typeinterface-number是配置不一致的接口名称.
·staticroute:静态路由配置不一致.
·ospfid:OSPF配置不一致.
id为OSPF进程ID.
·bgp:BGP配置不一致.
·license:License配置.
·hash:下次启动的哈希模式及哈希因子配置不一致.
","管理员执行hrpconfigurationcheck手工进行主备配置一致性检查或者执行hrpconfigurationauto-check命令开启了主备配置一致性自动检查功能.
双机热备配置一致性检查发现主备NIP中某个特性的配置不一致.
","1.
根据告警中提示的特性模块名称检查主备防火墙上该模块的配置,并使用hrpsync命令进行一次批量备份或者手工修改主备配置为一致.
具体的检查项可参考.
","HRPI/4/CORE_STATE""CORE_STATE","DOWN","HRPcorestatechanged,old_state=[old-state],new_state=[new-state],local_priority=[local-priority],peer_priority=[peer-priority].
","4","HRP内部组状态变化.
","old-state:切换之前的状态,有四种:·initial·standby·active·load-balancenew-state:切换之后的状态,有四种:·initial·standby·active·load-balancelocal-priority:本端优先级.
peer-priority:对端优先级.
","HRP本端或者对端优先级变化导致状态切换.
","HRPI/4/UP","1.
正常运行信息,无需处理.
""UP","DOWN","HRPlinkchangestoup.
","4","HRP链路状态变为up.
","HRPI/4/VRRP_PEER_DOWN","无:无","HRPI/4/VRRP_PEER_DOWN","1.
正常运行信息,无需处理.
""VRRP_PEER_DOWN","DOWN","TheVRRPlinkwentdown.
(Interface=[interface-name],VrId=[virtual-router-ID],InetType=[vrrp-protocol-type]).
","4","主备NIP业务接口之间的链路故障,备用NIP收不到主用NIP接口发出的VRRP通告报文.
","interface-name:接口名称.
virtual-router-ID:VRRP备份组组号.
vrrp-protocol-type:VRRP协议类型,取值可以是VRRP4或VRRP6.
","主用或备用NIP的业务接口Down.
连接主备NIP业务接口的交换机发生故障.
Note:因为VRRP通告报文是由主用NIP向备用NIP发送,备用NIP不会向主用NIP发送,所以该日志仅会在备用NIP上打印.
如果接口上配置了多个VRRP备份组,则会按配置的VRRP备份组组号分别打印日志.
","1.
检查主用NIP的业务接口状态是否为Down.
2.
检查连接主备NIP业务接口的交换机是否发生故障.
","HRPI/5/VRRP_PEER_UP""VRRP_PEER_UP","DOWN","TheVRRPlinkwentup.
(Interface=[interface-name],VrId=[virtual-router-ID],InetType=[vrrp-protocol-type]).
","Whenbeingaskedwhethertocommitthecommand"undobulk-statenable",theuserchoseN.
","主备NIP业务接口之间可以正常通信,备用NIP能收到主用NIP接口发出的VRRP通告报文.
","主备NIP业务接口之间的链路从故障中恢复后,备用NIP收到主用NIP发来的VRRP通告报文时会产生该日志.

Note:因为VRRP通告报文是由主用NIP向备用NIP发送,备用NIP不会向主用NIP发送,所以该日志仅会在备用NIP上打印.
如果接口上配置了多个VRRP备份组,则会按配置的VRRP备份组组号分别打印日志.
","主用或备用NIP的业务接口Down.
连接主备NIP业务接口的交换机发生故障.
Note:因为VRRP通告报文是由主用NIP向备用NIP发送,备用NIP不会向主用NIP发送,所以该日志仅会在备用NIP上打印.
如果接口上配置了多个VRRP备份组,则会按配置的VRRP备份组组号分别打印日志.
","HTTPD/6/CMD","1.
正常运行信息,无需处理.
""HTTPD","task:[task-name]ip:[ip-addrss]user:[user-name]command:[command].
","CMD_AUTO_UNLOCK","6","Web用户执行命令.
","task-name:任务.
ip-addrss:IP地址.
user-name:用户名.
command:命令.
","HTTPD/4/COMM_FAIL","task-name:任务.
ip-addrss:IP地址.
user-name:用户名.
command:命令.
","1.
正常运行信息,无需处理.
""COMM_FAIL","task:[task-name]ip:[ip-addrss]user:[user-name]command:[command].
","task:[task-name]ip:[ip-address]user:[user-name]commfailed:[command].
","4","Web执行取数失败.
","task-name:任务名称.
ip-address:IP地址.
user-name:用户名.
command:取数描述.
","web执行取数失败.
","1.
关注是否有web页面取数错误.
","HTTPD/7/COMM_SUCC""COMM_SUCC","task:[task-name]ip:[ip-addrss]user:[user-name]command:[command].
","task:[task-name]ip:[ip-address]user:[user-name]commsuccessfully:[command]","TherequestofreleasingGQ'sresourceisinvalid.
(Position:PrivateSlot=[slot-id],Direction=[direction];Releaser:ModuleId=0x[moduleid];Expected:GqIdNumber=[expected-gqidnumber];Hold:GqIdNumber=[hold-gqidnumber])","Web执行取数成功.
","web执行取数成功.
","web执行取数失败.
","1.
日常运行信息,无需处理.
","HTTPD/5/CUT""CUT","task:[task-name]ip:[ip-addrss]user:[user-name]command:[command].
","User[user-name](IP:[ip-address]ID:[ID])iscut.
","Whenbeingaskedwhethertocommitthecommand"undobulk-statenable",theuserchoseN.
","用户被强制注销.
","user-name:用户名.
ip-address:用户的IP地址.
ID:系统分配的用户ID.
","强制注销一个Web用户.
","HTTPD/4/DOWNLOADFAIL","1.
正常运行信息,无需处理.
""DOWNLOADFAIL","task:[task-name]ip:[ip-addrss]user:[user-name]command:[command].
","TheuserfailedtodownloadthefileonthewebUI.
(Task=task-name,Ip=ip-address,User=user-name,Vrf=virtual-system,FileName=[file-name])","4","用户通过Web界面下载文件失败.
","task-name:任务.
ip-address:IP地址.
user-name:用户名.
virtual-system:虚拟系统.
public表示根系统.
file-name:文件名.
","1.
请确认是否有权限访问或下载文件.
","task-name:任务.
ip-address:IP地址.
user-name:用户名.
virtual-system:虚拟系统.
public表示根系统.
file-name:文件名.
","HTTPD/5/DOWNLOADSUCC""DOWNLOADSUCC","task:[task-name]ip:[ip-addrss]user:[user-name]command:[command].
","TheuserdownloadedthefilesuccessfullyonthewebUI.
(Task=task-name,Ip=ip-address,User=user-name,Vrf=virtual-system,FileName=[file-name])","Whenbeingaskedwhethertocommitthecommand"undobulk-statenable",theuserchoseN.
","用户通过Web界面成功下载文件.
","task-name:Indicatesthenameofatask.
ip-address:IndicatestheIPaddressofauser.
user-name:Indicatesthenameofauser.
virtual-system:Indicatesavirtualsystem.
publicindicatesthepublicsystem.
file-name:Indicatesthenameofthefile.
","HTTPD/4/EXPORTFAIL","task-name:Indicatesthenameofatask.
ip-address:IndicatestheIPaddressofauser.
user-name:Indicatesthenameofauser.
virtual-system:Indicatesavirtualsystem.
publicindicatesthepublicsystem.
file-name:Indicatesthenameofthefile.
","1.
正常运行信息,无需处理.
""EXPORTFAIL","task:[task-name]ip:[ip-addrss]user:[user-name]command:[command].
","TheuserfailedtoexporttheconfigurationfromthevirtualsystemonthewebUI.
(Task=task-name,Ip=ip-address,User=user-name,Vrf=virtual-system)","4","用户通过Web界面导出文件失败.
","task-name:任务.
ip-address:IP地址.
user-name:用户名.
virtual-system:虚拟系统.
public表示根系统.
","HTTPD/5/EXPORTSUCC","task-name:任务.
ip-address:IP地址.
user-name:用户名.
virtual-system:虚拟系统.
public表示根系统.
","HQOS/7/GQRSRELREQINVALID""EXPORTSUCC","task:[task-name]ip:[ip-addrss]user:[user-name]command:[command].
","TheuserexporttheconfigurationfromthevirtualsystemsuccessfullyonthewebUI.
(Task=task-name,Ip=ip-address,User=user-name,Vrf=virtual-system)","Whenbeingaskedwhethertocommitthecommand"undobulk-statenable",theuserchoseN.
","用户通过Web界面成功导出文件.
","HTTPD/5/FAIL","HTTPD/5/EXPORTSUCC","HTTPD/5/FAIL","1.
正常运行信息,无需处理.
""FAIL","task:[task-name]ip:[ip-addrss]user:[user-name]command:[command].
","User[user-name](IP:[ip-address]ID:[user-id])loginfailed.
","Whenbeingaskedwhethertocommitthecommand"undobulk-statenable",theuserchoseN.
","用户登录失败.
","user-name:用户名.
ip-address:IP地址.
user-id:用户ID.
","HTTPD/4/IMPORTFAIL","user-name:用户名.
ip-address:IP地址.
user-id:用户ID.
","1.
正常运行信息,无需处理.
""IMPORTFAIL","task:[task-name]ip:[ip-addrss]user:[user-name]command:[command].
","TheuserfailedtoimporttheconfigurationintothevirtualsystemonthewebUI.
(Task=task-name,Ip=ip-address,User=user-name,Vrf=virtual-system)","4","用户通过Web界面导入文件失败.
","1.
检查待导入文件的格式是否正确.
","HTTPD/5/EXPORTSUCC","1.
检查待导入文件的格式是否正确.
","HTTPD/5/IMPORTSUCC""IMPORTSUCC","task:[task-name]ip:[ip-addrss]user:[user-name]command:[command].
","TheuserimporttheconfigurationintothevirtualsystemsuccessfullyonthewebUI.
(Task=task-name,Ip=ip-address,User=user-name,Vrf=virtual-system)","Whenbeingaskedwhethertocommitthecommand"undobulk-statenable",theuserchoseN.
","用户通过Web界面成功导入文件.
","HTTPD/4/MAX_USERS","HTTPD/5/EXPORTSUCC","HTTPD/4/MAX_USERS","1.

正常运行信息,无需处理.
""MAX_USERS","task:[task-name]ip:[ip-addrss]user:[user-name]command:[command].
","Thenumberofwebusersexceededthemaximum.
(Ip=ip-address,User=user-name,Vrf=virtual-system)","4","Web管理员接入数超出最大值.
","ip-address:IP地址.
user-name:用户名.
virtual-system:虚拟系统.
public表示根系统.
","1.
请稍后登录.
","ip-address:IP地址.
user-name:用户名.
virtual-system:虚拟系统.
public表示根系统.
","HTTPD/5/OUT""OUT","task:[task-name]ip:[ip-addrss]user:[user-name]command:[command].
","User[user-name](IP:[ip-address]ID:[user-id])logout.
","Whenbeingaskedwhethertocommitthecommand"undobulk-statenable",theuserchoseN.
","用户注销.
","HTTPD/6/PASS","HTTPD/4/IMPORTFAIL","HTTPD/6/PASS","1.
正常运行信息,无需处理.
""PASS","task:[task-name]ip:[ip-addrss]user:[user-name]command:[command].
","User[user-name](IP:[IP-address]ID:[user-id])loginsucceeded.
","6","Web登录成功.
","user-name:用户名.
IP-address:IP地址.
user-id:用户ID.
","用户登录成功.
","HTTPD/4/UPLOADFAIL","1.
正常运行信息,无需处理.
""UPLOADFAIL","task:[task-name]ip:[ip-addrss]user:[user-name]command:[command].
","TheuserfailedtouploadthefileonthewebUI.
(Task=task-name,Ip=ip-address,User=user-name,Vrf=virtual-system,FileName=[file-name])","4","用户通过Web界面上传文件失败.
","·设备存储空间不足·文件格式错误","1.
请确认是否有权限访问或下载文件.
","1.
检查存储空间,删除无用文件.
2.
检查文件格式是否正确.
","HTTPD/5/UPLOADSUCC""UPLOADSUCC","task:[task-name]ip:[ip-addrss]user:[user-name]command:[command].
","TheuseruploadedthefilesuccessfullyonthewebUI.
(Task=task-name,Ip=ip-address,User=user-name,Vrf=virtual-system,FileName=[file-name])","Whenbeingaskedwhethertocommitthecommand"undobulk-statenable",theuserchoseN.
","用户通过Web界面成功上传文件.
","HWCM/4/CCOPY","1.
请确认是否有权限访问或下载文件.
","HWCM/4/CCOPY","1.
正常运行信息,无需处理.
""HWCM","CCOPY","Configurationcopy.
(OperationType=[integer],OptTime=[TIMETICK],OptState=[integer],OptEndTime=[TIMETICK])","4","配置COPY操作.
","OperationType:操作类型.
OptTime:操作时间.
OptState:操作状态.
OptEndTime:操作结束时间.
","用户通过MIB对配置文件进行保存操作.
","HWCM/5/TRAPLOG","1.
正常运行信息,无需处理.
""TRAPLOG","CCOPY","OID[oid]configurechanged.
(EventIndex=[integer],CommandSource=[integer],ConfigSource=[integer],ConfigDestination=[integer])","Whenbeingaskedwhethertocommitthecommand"undobulk-statenable",theuserchoseN.
","配置发生更改.
","oid:OID值.
EventIndex:事件索引.
CommandSource:命令源.
ConfigSource:配置源.
ConfigDestination:配置目的.
","当配置发生改变,记录日志.
","IFNET/4/ACOAM_ENABLE_FAIL","1.
正常运行信息,无需处理.
""IFNET","ACOAM_ENABLE_FAIL","FailedtonotifyApplicationmoduleoftheACOAMCFGevent.
(Application=[STRING])","4","通告应用模块ACOAM配置事件失败.
","Application:应用模块名称.
","向应用模块通告ACOAM配置事件出错.
","1.
执行displaydiagnostic-information命令,保存显示结果,并联系华为技术支持工程师.
","IFNET/5/ACOAM_STATE_CHANGE""ACOAM_STATE_CHANGE","ACOAM_ENABLE_FAIL","TheOAMManagerdetectedinterfacestateschange.
(InterfaceName=[STRING],State=[STRING])","Whenbeingaskedwhethertocommitthecommand"undobulk-statenable",theuserchoseN.
","OAMManager检测到接口状态改变.
","InterfaceName:接口名称.
State:接口的链路层协议状态.
具体情况如下:1、Up:接口的链路层协议处于正常运行状态.
2、Down:接口的链路层协议不正常.
","配置oamdetect命令后,OAMmanager收到ACOAM状态变化消息.
","IFNET/6/APP_NOTIFY_FAULT","1.
正常运行信息,无需处理.
""APP_NOTIFY_FAULT","ACOAM_ENABLE_FAIL","TheApplicationmodule[module]oftheinterface[interface-name].
","6","应用模块通告故障.
","[module]:模块名.
[interface-name]:接口名称.
","App模块进行故障通告.
","IFNET/4/BOARD_DISABLE","1.
正常运行信息,无需处理.
""BOARD_DISABLE","ACOAM_ENABLE_FAIL","Board[board-number]hasbeenunavailable.
","4","单板不可用.
","[board-number]:接口板号.
","接口板被拔出.
","IFNET/4/BOARD_ENABLE","1.
正常运行信息,无需处理.
""BOARD_ENABLE","ACOAM_ENABLE_FAIL","Board[board-number]hasbeenavailable.
","4","单板可用.
","接口板被插入机框中.
","接口板被拔出.
","IFNET/4/BWRATE_IN_RESUME","1.
正常运行信息,无需处理.
""BWRATE_IN_RESUME","ACOAM_ENABLE_FAIL","Interfaceinputflowbandwidthusagewasrestoredtothelogthreshold.
(Interface=[interface],BandWidthUsage=[usage],LogThreshold=[threshod])","4","接口入带宽利用率低于配置的恢复阈值.
","Interface:接口名称.
BandWidthUsage:当前带宽利用率.
LogThreshold:接口当前配置的阈值.
","IFNET/4/BWRATE_IN_RISING","Interface:接口名称.
BandWidthUsage:当前带宽利用率.
LogThreshold:接口当前配置的阈值.
","1.
正常运行信息,无需处理.
""BWRATE_IN_RISING","ACOAM_ENABLE_FAIL","Interfaceinputflowbandwidthusageexceededthelogthreshold.
(Interface=[interface],BandWidthUsage=[usage],LogThreshold=[threshod])","4","接口入带宽利用率超过配置的阈值.
","1.
如果此条日志出现后,很长时间没有出现BWRATE_IN_RESUME日志,可以考虑扩容.
","IFNET/4/BWRATE_IN_RISING","1.
如果此条日志出现后,很长时间没有出现BWRATE_IN_RESUME日志,可以考虑扩容.
","IFNET/4/BWRATE_OUT_RESUME""BWRATE_OUT_RESUME","ACOAM_ENABLE_FAIL","Interfaceoutputflowbandwidthusagewasrestoredtothelogthreshold.
(Interface=[interface],BandWidthUsage=[usage],LogThreshold=[threshod])","4","接口出带宽利用率低于配置的恢复阈值.
","IFNET/4/BWRATE_OUT_RISING","IFNET/4/BWRATE_IN_RISING","IFNET/4/BWRATE_OUT_RISING","1.

正常运行信息,无需处理.
""BWRATE_OUT_RISING","ACOAM_ENABLE_FAIL","Interfaceoutputflowbandwidthusageexceededthelogthreshold.
(Interface=[interface],BandWidthUsage=[usage],LogThreshold=[threshod])","4","接口出带宽利用率超过配置的阈值.
","1.
如果此条日志出现后,很长时间没有出现BWRATE_OUT_RESUME日志,可以考虑扩容.
","IFNET/4/BWRATE_IN_RISING","1.
如果此条日志出现后,很长时间没有出现BWRATE_OUT_RESUME日志,可以考虑扩容.
","IFNET/4/CARD_DISABLE""CARD_DISABLE","ACOAM_ENABLE_FAIL","Board[board-number]card[card-number]hasbeenunavailable.
","4","单板上的接口卡不可用.
","[board-number]:接口板号.
[card-number]:接口卡号.
","接口卡被拔出.
","IFNET/4/CARD_ENABLE","1.
正常运行信息,无需处理.
""CARD_ENABLE","ACOAM_ENABLE_FAIL","Board[board-number]card[card-number]hasbeenavailable.
","4","单板上的接口卡可用.
","接口卡被插入单板.
","接口卡被拔出.
","IFNET/4/CHANGE_ENCAP","1.
正常运行信息,无需处理.
""CHANGE_ENCAP","ACOAM_ENABLE_FAIL","Theuserperformedtheconfigurationthatwillchangetheencapsulationprotocolofthelinkandthenselected[STRING].
","4","用户当前配置会改变链路层协议类型,需要用户确认.
","[STRING]:用户确认是否更改链路层协议类型.
·Y:用户确认更改链路层协议类型.
·N:用户确认不更改链路层协议类型.
","用户更改链路层协议类型.
","IFNET/4/FLOWDOWN","1.
正常运行信息,无需处理.
""FLOWDOWN","ACOAM_ENABLE_FAIL","ThestateofinterfaceturnedtoDOWNbecauseofFLOWDOWN.
(Interface=[STRING],SysUpTime=[ULONG])","4","接口的状态发生变化.
","Interface:接口名称.
SysUpTime:系统启动时间.
","流量状态发生变化.
","IFNET/4/FLOWUP","1.
正常运行信息,无需处理.
""FLOWUP","ACOAM_ENABLE_FAIL","ThestateofinterfaceturnedtoUPbecauseofFLOWUP.
(Interface=[STRING],SysUpTime=[ULONG])","4","IFNET/4/IF_DISABLE","Interface:接口名称.
SysUpTime:系统启动时间.
","流量状态发生变化.
","IFNET/4/FLOWUP","1.
正常运行信息,无需处理.
""IF_DISABLE","ACOAM_ENABLE_FAIL","Interface[interface-name]hasbeenunavailable.
","4","接口不可用.
","[interface-name]:接口名称.
","接口转变为不可用状态.
","IFNET/4/IF_ENABLE","1.
正常运行信息,无需处理.
""IF_ENABLE","ACOAM_ENABLE_FAIL","Interface[interface-name]hasbeenavailable.
","4","接口可用.
","接口转变为可用状态.
","接口转变为不可用状态.
","IFNET/6/IF_INFO_CHANGE","1.

正常运行信息,无需处理.
""IF_INFO_CHANGE","ACOAM_ENABLE_FAIL","Theinterface[interface-name]changedthe[property-name]from[old-value]to[new-value].
","6","接口的属性值发生变化.
","[interface-name]:接口名[property-name]:接口属性名[old-value]:接口属性原值[new-value]:接口属性新值","IFNET/4/IF_STATE","[interface-name]:接口名[property-name]:接口属性名[old-value]:接口属性原值[new-value]:接口属性新值","1.
正常运行信息,无需处理.
""IF_STATE","ACOAM_ENABLE_FAIL","Interface[interface-name]hasturnedinto[state]state.
","4","[interface-name]:接口名称.
[state]:链路层协议状态.
具体情况如下1、Up:接口的链路层协议处于正常运行状态.
2、Down:接口的链路层协议不正常.
","Interface:接口名称.
SysUpTime:系统启动时间.
","接口状态发生变化.
","IFNET/4/LINK_STATE","1.
正常运行信息,无需处理.
""LINK_STATE","ACOAM_ENABLE_FAIL","Thelineprotocol[line-protocol]ontheinterface[interface-name]hasenteredthe[state]state.
","4","接口的链路协议状态变化.
","[line-protocol]:链路层协议名称.
[interface-name]:接口名.
[state]:链路层协议状态.
具体情况如下:1、UP:接口的链路层协议处于正常运行状态.
2、DOWN:接口的链路层协议不正常.
","接口的链路协议状态发生改变.
","IFNET/4/NTF_ACOAM_STATE_FAIL","1.
正常运行信息,无需处理.
""NTF_ACOAM_STATE_FAIL","ACOAM_ENABLE_FAIL","FailedtonotifyApplicationmoduleoftheACOAMstatechangeevent.
(Application=[STRING])","4","通告应用模块ACOAM状态变化事件失败.
","向应用模块通告ACOAM状态变化事件出错.
","向应用模块通告ACOAM配置事件出错.
","IFNET/6/NTF_STATE_CHANGE","IFNET/5/ACOAM_STATE_CHANGE""NTF_STATE_CHANGE","ACOAM_ENABLE_FAIL","TheOAMManagerinterfacefaultnotifystatechange.
(InterfaceName=[STRING],State=[STRING])","6","OAMManager接口故障通告状态改变.
","InterfaceName:接口名称.
State:状态.
","配置oamnotify命令后,OAMmanager收到APP状态变化消息.
","IFNET/4/OUT_OF_MEMORY","1.
正常运行信息,无需处理.
""OUT_OF_MEMORY","ACOAM_ENABLE_FAIL","Insufficientmemory.
","4","IFNET/6/REPEAT_NOTIFY","内存不足.
","无:无","内存不足.
","IFNET/5/ACOAM_STATE_CHANGE""REPEAT_NOTIFY","ACOAM_ENABLE_FAIL","TheApplicationmodulerepeatedlynotifiedthefault.
(InterfaceName=[STRING],State=[STRING])","6","应用模块重复通告故障.
","InterfaceName:接口名称.
State:接口的链路层协议状态.
","应用模块进行重复故障通告.
","INFO/4/DBG_ALL","IFNET/5/ACOAM_STATE_CHANGE""INFO","DBG_ALL","Whendecidingwhethertoturningonallthedebuggingswitches,theuserchose[Y/N].
","4","当决定是否打开所有调试开关时,用户进行了选择.
","Y/N:用户执行操作的类型.
选择y执行该操作;选择n不支持该操作.
","执行debuggingall命令时,记录用户输入的参数.
","INFO/4/FILE_DELETE","1.
正常运行信息,无需处理.
""FILE_DELETE","DBG_ALL","Thefile"[filename]"conflictswithlogfiledirectory,deleteit.
","4","日志文件的名称和日志文件夹名称冲突,删除日志文件.
","filename:日志文件名称.
","·原因1:系统在创建文件夹时,先创建同名文件,再把文件的属性改为文件夹,在修改属性时可能发生失败,导致创建了一个和日志文件夹同名的文件.
·原因2:用户手动在设备上创建了和日志文件夹同名的文件.
","INFO/4/FILE_RENAME","1.
正常运行信息,无需处理.
""FILE_RENAME","DBG_ALL","Thefile"[OldName]"conflictswithlogfiledirectory,itisrenamedto"[NewName]".
","4","日志文件和日志文件夹名字冲突,对日志文件进行重命名.
","OldName:修改前的日志文件名称.
NewName:修改后的日志文件名称.
","INFO/6/LOGFILE_DELETED","INFO/4/FILE_RENAME","1.
正常运行信息,无需处理.
""LOGFILE_DELETED","DBG_ALL","Thelogfile[filename]isdeletedsuccessfully.
","6","日志文件成功删除.
","filename:删除的日志文件名.
","日志文件个数超过设置的上限,或磁盘剩余空间不足30M.
","1.
确认是否需要保存设备上即将被自动删除的旧的日志文件.
","INFO/4/RST_LOGB""RST_LOGB","DBG_ALL","Whendecidingwhethertoresetthelogbuffer,theuserchose[Y/N].
","4","当决定是否重置日志缓冲区时,用户进行了选择.
","执行resetlogbuffer命令时,记录用户输入的参数.
","执行debuggingall命令时,记录用户输入的参数.
","INFO/4/SUPPRESS_LOG","1.
正常运行信息,无需处理.
""SUPPRESS_LOG","DBG_ALL","Lastmessagerepeated[times]times.
(InfoID=[info-id],ModuleName=[module-name],InfoAlias=[info-alias])","4","最后一条消息重复次数.
","times:重复次数.
info-id:重复日志ID.
module-name:重复日志所属模块名.
info-alias:重复日志的日志别名.
","当系统连续产生重复的日志时,第一条日志正常记录,后续重复的日志只记录重复次数.
如果其他日志上送或者输出时间超时,触发重复次数日志上送.
","INFO/5/FILTERINFOID_FAIL","1.

正常运行信息,无需处理.
""FILTERINFOID_FAIL","DBG_ALL","Failedtoexecutetheinfo-centerfilter-idcommand.
(Task=[task],Ip=[ip-address],VpnName=[vpn-name],User=[user],Parameter="[parameter]")","Whenbeingaskedwhethertocommitthecommand"undobulk-statenable",theuserchoseN.
","执行info-centerfilter-id命令失败时,记录所有配置失败的日志ID或助记符.
","task:任务ID.
ip-address:IP地址.
vpn-name:VPN实例名称.
user:用户名称.
parameter:所有日志过滤配置失败的日志ID或助记符,中间使用逗号隔开.
","执行info-centerfilter-id命令失败.
","1.
请检查配置的日志ID或助记符是否已经注册.
·如果没有注册,请注册日志ID或助记符.
·如果已经注册,请执行步骤2.
2.
请检查日志ID或助记符是否重复配置.
·如果有重复配置,请删除重复的配置.
·如果没有重复配置,请执行步骤3.
3.
请检查日志过滤配置是否已经达到上限.
·如果已经达到上限,请清除部分日志过滤信息.
·如果没有达到上限,请执行步骤4.
4.
请联系华为技术支持工程师.
","INFO/4/IC_DISABLE_INFOCENTER""IC_DISABLE_INFOCENTER","DBG_ALL","Recorded[command]commandinformation.
(Task=[task],Ip=[ip-address],VpnName=[vpn-name],User=[user],Command="[command]")","4","关闭信息中心开关记录本日志.
","task:任务ID.
ip-address:IP地址.
vpn-name:VPN实例名称.
user:用户名.
command:关闭信息中心开发使用的命令行.
","用户通过命令行undoinfo-centerenable或info-centerdisable关闭了信息中心开关.
","1.
通过执行命令info-centerenable命令重新打开信息中心.
","IP/6/IPADDMSGSEND""IP","IPADDMSGSEND","TheaddingoftheipaddressisnotifiedtoRM,ipaddressis[ip-address],maskis[mask],interfaceis[interface-name],returnvalueis[return-value].
","6","IP地址增加,通知路由管理,并告知IP地址,子网掩码,接口名称和返回值.
","ip-address:IP地址.
mask:掩码.
interface-name:接口名称.
return-value:返回值.
具体情况如下:·0:RM封装地址消息成功.
·1:RM封装地址消息失败.
","增加IP地址.
","IP/6/IPDELMSGSEND","1.
正常运行信息,无需处理.
""IPDELMSGSEND","IPADDMSGSEND","ThedeletionoftheipaddressisnotifiedtoRM,ipaddressis[ip-address],maskis[mask],interfaceis[interface-name],returnvalueis[return-value].
","6","IP地址删除,通知路由管理,并告知IP地址,子网掩码,接口名称和返回值.
","删除IP地址.
","增加IP地址.
","IP/6/IPIFATTACHOK","1.

正常运行信息,无需处理.
""IPIFATTACHOK","IPADDMSGSEND","CreatingIPv4controlblockforinterface[interface-name]issuccessful.
","6","成功创建接口的IPv4控制块.
","interface-name:接口名称.
","IP/6/IPIFDETACHOK","interface-name:接口名称.
","1.
正常运行信息,无需处理.
""IPIFDETACHOK","IPADDMSGSEND","DeletingIPv4controlblockforinterface[interface-name]issuccessful.
","6","成功删除接口的IPv4控制块.
","IPS/4/BOTNET","IP/6/IPIFDETACHOK","IPS/4/BOTNET","1.

正常运行信息,无需处理.
""IPS","BOTNET","Abotnetwasdetected.
(SyslogId=[syslog-id],VSys=[vsys-name],Policy=[policy-name],SrcIp=[source-ip],DstIp=[destination-ip],SrcPort=[source-port],DstPort=[destination-port],SrcZone=[source-zone],DstZone=[destination-zone],User=[user-name],Protocol=[protocol],Application=[application-name],Profile=[profile-name],SignName=[signature-name],SignId=[signature-id],EventNum=[event-number],Target=[target],Severity=[severity],Os=[operating-system],Category=[category],Role=[role],SrcLocation=[source-location],DstLocation=[destination-location],Action=[action])","4","IPS检测到网络中某个僵尸网络活动的报文,日志中描述了该事件的详细信息.
","syslog-id:日志序号.
vsys-name:虚拟系统名称.
policy-name:安全策略名称.
source-ip:报文的源IP地址.
destination-ip:报文的目的IP地址.
source-port:报文的源端口(对于ICMP报文,该字段为0).
destination-port:报文的目的端口(对于ICMP报文,该字段为0).
source-zone:报文的源安全域.
destination-zone:报文的目的安全域.
user-name:用户名.
protocol:签名检测到的报文所属协议.
application-name:签名检测到的报文所属应用.
profile-name:配置文件的名称.
signature-name:签名的名称.
signature-id:签名的ID.
event-number:日志归并引入字段,是否归并需根据归并频率及日志归并条件来确定,不发生归并则为1.
target:签名所检测的报文所攻击对象.
具体情况如下:·server:攻击对象为服务端.
·client:攻击对象为客户端.
·both:攻击对象为服务端和客户端.
severity:签名所检测的报文所造成攻击的严重性.
具体情况如下:·information:表示严重性为提示.
·low:表示严重性为低.
·medium:表示严重性为中.
·high:表示严重性为高.
operating-system:签名所检测的报文所攻击的操作系统.
具体情况如下:·all:表示所有系统.
·android:表示安卓系统.
·ios:表示苹果系统.
·unix-like:表示Unix系统.
·windows:表示Windows系统.
·other:表示其他系统.
category:签名检测到的报文攻击特征所属的威胁分类.
role:通信双方在僵尸网络中的角色.
具体情况如下:·1:僵尸主机到控制终端的报文.
·2:控制终端到僵尸主机的报文.
·3:C&C服务器到僵尸主机的报文.
·4:僵尸主机到C&C服务器的报文.
·5:控制终端到C&C服务器的报文.
·6:C&C服务器到控制终端的报文.
·7:僵尸主机到受害者的攻击报文.
source-location:源地址的地理位置(动态识别).
destination-location:目的地址的地理位置(动态识别).
action:签名动作.
具体情况如下:·alert:签名动作为告警.
·block:签名动作为阻断.
","报文命中了僵尸网络签名.
","IPS/4/CNC","1.
正常运行信息,无需处理.
""CNC","BOTNET","Amalwaredomainwasdetected.
(SyslogId=[syslog-id],VSys=[vsys-name],Policy=[policy-name],SrcIp=[source-ip-address],DstIp=[destination-ip-address],SrcPort=[source-port],DstPort=[destination-port],SrcZone=[source-zone],DstZone=[destination-zone],User=[user-name],Protocol=[protocol],Application=[application-name],Profile=[profile-name],DomainName=[domain-name],EventNum=[event-number],Action=[action])","4","域名过滤功能检测到访问的域名是一个恶意域名.
","[syslog-id]:日志序号.
[vsys-name]:虚拟系统名称.
[policy-name]:安全策略名称.
[source-ip]:报文的源IP地址.
[destination-ip]:报文的目的IP地址.
[source-port]:报文的源端口(对于ICMP报文,该字段为0).
[destination-port]:报文的目的端口(对于ICMP报文,该字段为0).
[source-zone]:报文的源安全域.
[destination-zone]:报文的目的安全域.
[user-name]:用户名.
[protocol]:报文的传输协议.
[application-name]:报文的应用协议.
[profile-name]:配置文件的名称.
[domain-name]:恶意域名.
[event-number]:命中次数.
[action]:采取的动作:·alert:告警·block:阻断","DNS报文中的域名命中恶意域名特征库中的恶意域名,系统按照管理员配置的动作处理报文,并产生一条日志.
","IPS/4/DETECT","1.
正常运行信息,无需处理.
""DETECT","BOTNET","Anintrusionwasdetected.
(SyslogId=[syslog-id],VSys=[vsys-name],Policy=[policy-name],SrcIp=[source-ip],DstIp=[destination-ip],SrcPort=[source-port],DstPort=[destination-port],SrcZone=[source-zone],DstZone=[destination-zone],User=[user-name],Protocol=[protocol],Application=[application-name],Profile=[profile-name],SignName=[signature-name],SignId=[signature-id],EventNum=[event-number],Target=[target],Severity=[severity],Os=[operating-system],Category=[category],Action=[action])","4","IPS检测到一个攻击、可疑事件或者某个网络活动(如登录、认证、探测等),日志中描述了该攻击事件的详细信息.
","syslog-id:日志序号.
vsys-name:虚拟系统名称.
policy-name:安全策略名称.
source-ip:报文的源IP地址.
destination-ip:报文的目的IP地址.
source-port:报文的源端口(对于ICMP报文,该字段为0).
destination-port:报文的目的端口(对于ICMP报文,该字段为0).
source-zone:报文的源安全域.
destination-zone:报文的目的安全域.
user-name:用户名.
protocol:签名检测到的报文所属协议.
application-name:签名检测到的报文所属应用.
profile-name:配置文件的名称.
signature-name:签名的名称.
signature-id:签名的ID.
event-number:日志归并引入字段,是否归并需根据归并频率及日志归并条件来确定,不发生归并则为1.
target:签名所检测的报文所攻击对象.
具体情况如下:·server:攻击对象为服务端.
·client:攻击对象为客户端.
·both:攻击对象为服务端和客户端.
severity:签名所检测的报文所造成攻击的严重性.
具体情况如下:·information:表示严重性为提示.
·low:表示严重性为低.
·medium:表示严重性为中.
·high:表示严重性为高.
operating-system:签名所检测的报文所攻击的操作系统.
具体情况如下:·all:表示所有系统.
·android:表示安卓系统.
·ios:表示苹果系统.
·unix-like:表示Unix系统.
·windows:表示Windows系统.
·other:表示其他系统.
category:签名检测到的报文攻击特征所属的威胁分类.
action:签名动作.
具体情况如下:·alert:签名动作为告警.
·block:签名动作为阻断.
","报文命中了某条签名.
","IPS/4/EXCEPTION","1.
正常运行信息,无需处理.
""EXCEPTION","BOTNET","ThepacketmatchedanexceptionIPSsignature.
(SyslogId=[syslog-id],VSys=[vsys-name],Policy=[policy-name],SrcIp=[source-ip],DstIp=[destination-ip],SrcPort=[source-port],DstPort=[destination-port],SrcZone=[source-zone],DstZone=[destination-zone],User=[user-name],Protocol=[protocol],Application=[application-name],Profile=[profile-name],SignName=[signature-name],SignId=[signature-id],EventNum=[event-number],Target=[target],Severity=[severity],Os=[operating-system],Category=[category],Action=[action])","4","IPS检测时命中了例外签名.
","报文命中了例外签名.
","报文命中了某条签名.
","IPS/4/TROJAN","1.

正常运行信息,无需处理.
""TROJAN","BOTNET","Atrojanhorsewasdetected.
(SyslogId=[syslog-id],VSys=[vsys-name],Policy=[policy-name],SrcIp=[source-ip],DstIp=[destination-ip],SrcPort=[source-port],DstPort=[destination-port],SrcZone=[source-zone],DstZone=[destination-zone],User=[user-name],Protocol=[protocol],Application=[application-name],Profile=[profile-name],SignName=[signature-name],SignId=[signature-id],EventNum=[event-number],Target=[target],Severity=[severity],Os=[operating-system],Category=[category],Role=[role],SrcLocation=[source-location],DstLocation=[destination-location],Action=[action])","4","IPS检测到网络中某个木马活动报文,日志中描述了该事件的详细信息.
","报文命中了木马签名.
","报文命中了僵尸网络签名.
","IPS/4/WORM","1.

正常运行信息,无需处理.
""WORM","BOTNET","Awormwasdetected.
(SyslogId=[syslog-id],VSys=[vsys-name],Policy=[policy-name],SrcIp=[source-ip],DstIp=[destination-ip],SrcPort=[source-port],DstPort=[destination-port],SrcZone=[source-zone],DstZone=[destination-zone],User=[user-name],Protocol=[protocol],Application=[application-name],Profile=[profile-name],SignName=[signature-name],SignId=[signature-id],EventNum=[event-number],Target=[target],Severity=[severity],Os=[operating-system],Category=[category],Action=[action])","4","IPS检测到网络中某个蠕虫活动报文,日志中描述了该事件的详细信息.
","报文命中了蠕虫签名.
","报文命中了某条签名.
","IPV6FIBAGENT/3/MEMCHECK","1.

正常运行信息,无需处理.
""IPV6FIBAGENT","MEMCHECK","Memorywascheckedaftertheroutesweredeletedduetopolicychange,andthereturnvaluewas[return-value].
","3","策略变化删除路由后进行内存检查.
","[return-value]:返回值类型.
具体情况如下1:内存不足.
2:内存严重不足.
","路由删除时内存检查.
","1.
执行命令displaydiagnostic-information,保存显示结果,并联系华为技术支持工程师.
","IPV6FIBAGENT/4/PLYDELE6""PLYDELE6","MEMCHECK","TheroutesweredeletedduetoFIB6policychange.
(QueueLength=[ULONG],MaxLength=[ULONG],UnreadNumber=[ULONG])","4","FIB6策略变化正在删除.
","QueueLength:队列长度.
MaxLength:最大长度.
UnreadNumber:未读数量.
","FIB6接口板读IPC队列,同时队列长度大于定值,并且未读队列长度大于定值.
","IPV6FIBAGENT/4/SENDPLYSLOT6","1.
正常运行信息,无需处理.
""SENDPLYSLOT6","MEMCHECK","FIB6failedtosendapolicytoslot[slot-number].
","4","FIB6向接口板发送策略失败.
","[slot-number]:接口板槽号.
","热插入时,主控板向接口板发送策略信息失败.
","1.
执行命令displayfib-policyslot[slot-number],查看接口板FIB策略,并保存显示结果;2.
联系华为技术支持工程师.
","IPV6FIBAGENT/4/SENDQUESLOTFAIL6""SENDQUESLOTFAIL6","MEMCHECK","FIB6failedtosendaquerytoslot[slot-number].
","4","FIB6向接口板发送查询信息失败.
","主备倒换后,主控板查询接口板的状态.
","热插入时,主控板向接口板发送策略信息失败.
","1.

执行命令displayfiboverloadstateslot[slot-number],查看接口板超限状态,并保存显示结果.
2.
联系华为技术支持工程师.
","IPV6FIBAGENT/6/TRIGDELEROUT6""TRIGDELEROUT6","MEMCHECK","TheroutesweredeletedduetoFIB6policychange.
Thetypeofdeletionwas[process-type].
","6","FIB6策略变化删除被触发.
","[process-type]:操作类型标识.
具体情况如下1:超限挂起删除.
2:超限转发删除.
","FIB6策略变化删除开始执行.
","IPV6PP/3/REACHMAX","1.
正常运行信息,无需处理.
""IPV6PP","REACHMAX","ThenumberoftheIPv6fragmentsreachedtheupperlimit!
","3","分片报文数目超过了最大值.
","1.
查看相关日志信息.
2.
执行命令debuggingipv6packet打开IPv6报文调试开关,查看分片信息,进行相应调整减少分片.
","无:无","1.
查看相关日志信息.
2.
执行命令debuggingipv6packet打开IPv6报文调试开关,查看分片信息,进行相应调整减少分片.
","IPV6PP/3/REASSERROR""REASSERROR","REACHMAX","ThenumberofthereassemblyIPv6queuesreachedtheupperlimit!
","3","IPv6重组队列数目超过了最大值.
","ISIS/6/AC_RT_SEL_FAIL","无:无","ISIS/6/AC_RT_SEL_FAIL","IPV6PP/3/REASSERROR""ISIS","AC_RT_SEL_FAIL","ISIS[process-id]failedtoinvoketheactiveroute[route]selection.
(RouteEntryTable=[ULONG],EntryId=[ULONG],MTID=[USHORT],ReturnValue=[STRING])","6","IS-IS活跃路由选择失败.
","[process-id]:IS-IS进程号.
[route]:路由.
RouteEntryTable:路由表.
EntryId:入口号.
MTID:拓扑ID.
ReturnValue:返回值.
","选择路由失败.
","1.
检查当前路由信息.
","ISIS/6/AC_RT_V6_SEL_FAIL""AC_RT_V6_SEL_FAIL","AC_RT_SEL_FAIL","ISIS[process-id]failedtoinvoketheIPv6activeroute[route]selection.
(RouteEntryTable=[ULONG],EntryId=[ULONG],MTID=[USHORT],ReturnValue=[STRING])","6","IS-ISIPv6活跃路由选择失败.
","选择IPv6路由失败.
","选择路由失败.
","ISIS/6/ADD_L1_SUMRT_FAIL","ISIS/6/AC_RT_V6_SEL_FAIL""ADD_L1_SUMRT_FAIL","AC_RT_SEL_FAIL","ISIS[process-id]failedtoaddtheLevel-1summaryroute.
(MTID=[USHORT])","6","IS-IS添加Level-1聚合路由失败.
","[process-id]:IS-IS进程号.
MTID:拓扑ID.
","添加Level-1聚合路由失败.
","ISIS/6/ADD_L2_SUMRT_FAIL","CFM/4/RST_CFG""ADD_L2_SUMRT_FAIL","AC_RT_SEL_FAIL","ISIS[process-id]failedtoaddtheLevel-2summaryroute.
(MTID=[USHORT])","6","IS-IS添加Level-2聚合路由失败.
","添加Level-2聚合路由失败.
","添加Level-1聚合路由失败.
","ISIS/6/ADD_P2P_ADJ_ERR","CFM/4/RST_CFG""ADD_P2P_ADJ_ERR","AC_RT_SEL_FAIL","AdvertisingP2Padjacencyfailed.
(InterfaceName=[STRING],MTID=[USHORT])","6","添加P2P邻居错误.
","InterfaceName:接口名.
MTID:拓扑ID.
","内部原因.
","ISIS/6/ADD_REDSTRBT_RT_FAIL","1.
正常运行信息,无需处理.
""ADD_REDSTRBT_RT_FAIL","AC_RT_SEL_FAIL","ISIS[process-id]failedtoaddtheLevel-[level]redistributedroute[route]intotheforwardingtable.
(MTID=[USHORT])","6","IS-IS增加引入路由失败.
","[process-id]:IS-IS进程号.
[level]:IS-IS级别.
[route]:路由地址.
MTID:拓扑ID.
","增加路由失败.
","1.
检查路由地址信息.
","ISIS/6/ADD_RTTO_LSP_FAIL""ADD_RTTO_LSP_FAIL","AC_RT_SEL_FAIL","ISIS[process-id]failedtoaddtheroutetotheLSP.
(MTID=[USHORT])","6","IS-IS往LSP添加路由失败.
","添加路由到LSP失败.
","添加Level-1聚合路由失败.
","ISIS/6/ADD_SUMMRT_URT_FAIL","ISIS/6/AC_RT_V6_SEL_FAIL""ADD_SUMMRT_URT_FAIL","AC_RT_SEL_FAIL","ISIS[process-id]failedtoaddNULL0routetoURTforsummary.
(MTID=[USHORT])","6","IS-IS向单播路由表添加NULL0聚合路由失败.
","添加NULL0路由失败.
","添加Level-1聚合路由失败.
","ISIS/6/ADD_SUMRT_FAIL","ISIS/6/AC_RT_V6_SEL_FAIL""ADD_SUMRT_FAIL","AC_RT_SEL_FAIL","ISIS[process-id]failedtoaddthesummaryrouteforredistributeroute.
(MTID=[USHORT])","6","IS-IS聚合引入路由失败.
","填加聚合路由.
","添加Level-1聚合路由失败.
","1.
检查为何失败.
","ISIS/4/ADJ_CHANGE_LEVEL""ADJ_CHANGE_LEVEL","AC_RT_SEL_FAIL","TheneighborofISISwaschanged.
(IsisProcessId=[USHORT],Neighbor=[STRING],InterfaceName=[STRING],CurrentState=[STRING],ChangeType=[STRING],Level=[STRING])","4","IS-IS邻居发生变化.
","IsisProcessId:IS-IS进程号.
Neighbor:邻居的系统ID.
InterfaceName:接口名.
CurrentState:当前状态.
·UP·INIT·DOWNChangeType:标识变化的类型.
·MULTIPLE_P2P_AD:出现重复的p2p邻居.
·L1_CIRCUIT_DOWN:Level-1接口Down.
·L2_CIRCUIT_DOWN:Level-2接口Down.
·CIRCUIT_DOWN:P2P接口Down.
·CLEAR_L1_NEIGHBOUR:Undoisis,Level-1邻居变化.
·CLEAR_L2_NEIGHBOUR:Undoisis,Level-2邻居变化.
·CLEAR_NEIGHBOUR:Undoisis,P2P邻居变化.
·P2P_HOLDTIMER_EXPIRED:P2P邻居超时.
·L1_HOLDTIMER_EXPIRED:Level-1邻居超时.
·L2_HOLDTIMER_EXPIRED:Level-2邻居超时.
·NEW_L1_ADJ:新的Level-1邻居.
·NEW_L2_ADJ:新的Level-2邻居.
·USGAGE_MISMATCH:邻居的类型和Hello报文的类型不一致.
·UPDT_LSP_FAILED:在LSP中更新邻居状态失败.
·NO_MEMORY_FOR_HIGER_PRIORITY_ADJ:对于优先级高的邻居没有可用的内存空间.
·DIFFERENT_NET:邻居的network地址发生变化.
·P2P_CIRCUIT_ID_CONFLT:P2P接口ID冲突.
·NEW_ADJ:新P2P邻居.
·AREA_MISMATCH:邻居的区域地址不匹配.
·3_WAY_DOWN:3次握手,邻居Down.
·3_WAY_INIT:3次握手,邻居Init.
·3_WAY_UP:3次握手,邻居Up.
·P2P_INIT_MEMORY_SHORTAGE:内存不足,P2P邻居变为init.
·PROTOCOL_V4_6_TO_V4:邻居的类型从IPv4和IPv6变为IPv4.
·PROTOCOL_V4_6_TO_V6:邻居的类型从IPv4和IPv6变为IPv6.
·PROTOCOL_V4_TO_V4_6:邻居的类型从IPv4变为IPv4和IPv6.
·PROTOCOL_V6_TO_V4_6:邻居的类型从v6变为IPv4和IPv6.
·PROTOCOL_V4_TO_V6:邻居的类型从IPv4变为IPv6.
·PROTOCOL_V6_TO_V4:邻居的类型从IPv6变为IPv4.
·TUNNEL_LEVEL_CHANGE:TunnelLevel变化.
·TUNNEL_L1_NEW:Level-1Tunnel邻居产生.
·TUNNEL_L2_NEW:Level-2Tunnel邻居产生.
·TUNNEL_L1_DOWN:Level-1Tunnel邻居Down.
·TUNNEL_L2_DOWN:Level-2Tunnel邻居Down.
·TUNNEL_L2_TO_L12:Tunnel邻居发生变化从Level-2变为Level-1-2·TUNNEL_L1_TO_L12:Tunnel邻居发生变化从Level-1变为Level-1-2.
·NEW_ADJ_CREATE:产生新邻居.
·NO_COMMON_TOPOLOGY:Hello报文和当前的邻居没有公共的拓扑.
·REMOTE_IS_PACKET_CHANGED:远端的邻居的Hello报文发生变化.
·NO_SNPA_IN_IIH:收到的Hello报文中不含有SNPA地址.
Level:邻居类型.
","ISIS/6/ALIID_TLV_LEN_SHORT","IsisProcessId:IS-IS进程号.
Neighbor:邻居的系统ID.
InterfaceName:接口名.
CurrentState:当前状态.
·UP·INIT·DOWNChangeType:标识变化的类型.
·MULTIPLE_P2P_AD:出现重复的p2p邻居.
·L1_CIRCUIT_DOWN:Level-1接口Down.
·L2_CIRCUIT_DOWN:Level-2接口Down.
·CIRCUIT_DOWN:P2P接口Down.
·CLEAR_L1_NEIGHBOUR:Undoisis,Level-1邻居变化.
·CLEAR_L2_NEIGHBOUR:Undoisis,Level-2邻居变化.
·CLEAR_NEIGHBOUR:Undoisis,P2P邻居变化.
·P2P_HOLDTIMER_EXPIRED:P2P邻居超时.
·L1_HOLDTIMER_EXPIRED:Level-1邻居超时.
·L2_HOLDTIMER_EXPIRED:Level-2邻居超时.
·NEW_L1_ADJ:新的Level-1邻居.
·NEW_L2_ADJ:新的Level-2邻居.
·USGAGE_MISMATCH:邻居的类型和Hello报文的类型不一致.
·UPDT_LSP_FAILED:在LSP中更新邻居状态失败.
·NO_MEMORY_FOR_HIGER_PRIORITY_ADJ:对于优先级高的邻居没有可用的内存空间.
·DIFFERENT_NET:邻居的network地址发生变化.
·P2P_CIRCUIT_ID_CONFLT:P2P接口ID冲突.
·NEW_ADJ:新P2P邻居.
·AREA_MISMATCH:邻居的区域地址不匹配.
·3_WAY_DOWN:3次握手,邻居Down.
·3_WAY_INIT:3次握手,邻居Init.
·3_WAY_UP:3次握手,邻居Up.
·P2P_INIT_MEMORY_SHORTAGE:内存不足,P2P邻居变为init.
·PROTOCOL_V4_6_TO_V4:邻居的类型从IPv4和IPv6变为IPv4.
·PROTOCOL_V4_6_TO_V6:邻居的类型从IPv4和IPv6变为IPv6.
·PROTOCOL_V4_TO_V4_6:邻居的类型从IPv4变为IPv4和IPv6.
·PROTOCOL_V6_TO_V4_6:邻居的类型从v6变为IPv4和IPv6.
·PROTOCOL_V4_TO_V6:邻居的类型从IPv4变为IPv6.
·PROTOCOL_V6_TO_V4:邻居的类型从IPv6变为IPv4.
·TUNNEL_LEVEL_CHANGE:TunnelLevel变化.
·TUNNEL_L1_NEW:Level-1Tunnel邻居产生.
·TUNNEL_L2_NEW:Level-2Tunnel邻居产生.
·TUNNEL_L1_DOWN:Level-1Tunnel邻居Down.
·TUNNEL_L2_DOWN:Level-2Tunnel邻居Down.
·TUNNEL_L2_TO_L12:Tunnel邻居发生变化从Level-2变为Level-1-2·TUNNEL_L1_TO_L12:Tunnel邻居发生变化从Level-1变为Level-1-2.
·NEW_ADJ_CREATE:产生新邻居.
·NO_COMMON_TOPOLOGY:Hello报文和当前的邻居没有公共的拓扑.
·REMOTE_IS_PACKET_CHANGED:远端的邻居的Hello报文发生变化.
·NO_SNPA_IN_IIH:收到的Hello报文中不含有SNPA地址.
Level:邻居类型.
","1.
正常运行信息,无需处理.
""ALIID_TLV_LEN_SHORT","AC_RT_SEL_FAIL","ISIS[system-index]ALIASIDTLVwasshorterthanvalidsize.
(ValidSize=[UCHAR])","6","IS-ISALIASIDTLV长度小于有效字节.
","[system-index]:IS-IS系统索引.
ValidSize:TLV长度.
","ISALIASID长度不够.
","ISIS/6/AUTH_TLV_OVER_ONECE","1.
正常运行信息,无需处理.
""AUTH_TLV_OVER_ONECE","AC_RT_SEL_FAIL","ISIS[process-id]ignoredtheLSPbecausetheauthenticationTLVoccurredmorethanonetime.
","6","IS-IS认证信息TLV多次出现,LSP忽略.
","[process-id]:IS-IS进程号.
","AuthTLV不止一个.
","ISIS/6/BAD_TLV_LEN","1.
正常运行信息,无需处理.
""BAD_TLV_LEN","AC_RT_SEL_FAIL","ISIS[process-id]receivedanLSPpacketwithinvalidTLVlength.
","6","IS-IS收到的LSP报文TLV长度无效.
","TLV报文长度错误.
","AuthTLV不止一个.
","ISIS/6/BIND_SOKT_FAIL","1.
正常运行信息,无需处理.
""BIND_SOKT_FAIL","AC_RT_SEL_FAIL","ISIS[process-id]failedtobindthesockettotheinterface[interface-name].
(InterfaceIndex=[STRING],ReturnValue=[ULONG])","6","IS-IS为接口绑定socket失败.
","[process-id]:IS-IS进程号.
[interface-name]:接口名.
InterfaceIndex:接口索引.
ReturnValue:返回值.
","绑定socket失败.
","1.
检查当前链路配置.
","ISIS/5/CIRC_STATE_SET""CIRC_STATE_SET","AC_RT_SEL_FAIL","ThestatusoftheISIS[process-id]interfaceis[interface-state].
(interface=[STRING])","Whenbeingaskedwhethertocommitthecommand"undobulk-statenable",theuserchoseN.
","IS-IS接口操作信息.
","[process-id]:IS-IS进程号.
[interface-state]:接口状态.
·MTUUP·MTUDOWN·IPUP·IPDOWN·LINKUP·LINKDOWNinterface:接口名.
","resetisisallisisenableisisipv6enable","ISIS/6/CONFLICT_SYSTEM_ID","1.
正常运行信息,无需处理.
""CONFLICT_SYSTEM_ID","AC_RT_SEL_FAIL","ISIS[process-id]maybedetectconflictingSystemID.
(SystemID=[STRING])","6","IS-IS检测到系统ID冲突.
","[process-id]:IS-IS进程号.
SystemID:IS-IS系统ID.
","同一拓扑中,两台IS-IS设备的SystemID配置重复.
","1.
修改冲突的SystemID,保证拓扑内路由器的SystemID不重复.
","ISIS/6/CREA_AREA_TLV_FAIL""CREA_AREA_TLV_FAIL","AC_RT_SEL_FAIL","ISIS[process-id]failedtocreatetheareaaddressTLVoptioninextendedLSPset.
","6","IS-IS在扩展LSP序列中创建区域地址TLV项失败.
","LSP分片模式变化,在LSP中创建区域地址TLV项.
","AuthTLV不止一个.
","1.
检查创建失败原因.
","ISIS/6/CREATE_CIRCUIT_FAIL""CREATE_CIRCUIT_FAIL","AC_RT_SEL_FAIL","ISIS[process-id]failedtocreatetheinterface.
","6","IS-IS创建接口失败.
","内部错误.
","AuthTLV不止一个.
","ISIS/6/CREATE_NBR_TLV_FAIL","1.
正常运行信息,无需处理.
""CREATE_NBR_TLV_FAIL","AC_RT_SEL_FAIL","ISIS[process-id]failedtoaddLevel-[level]neighborTLV.
(InterfaceName=[STRING],NeighborId=[STRING])","6","IS-IS添加指定Level邻居TLV失败.
","[process-id]:IS-IS进程号.
[level]:IS-IS级别.
InterfaceName:接口名.
NeighborId:邻居ID.
","内部错误,如申请内存失败.
","ISIS/6/CRT_P2P_ADJ_FAIL","1.
正常运行信息,无需处理.
""CRT_P2P_ADJ_FAIL","AC_RT_SEL_FAIL","ISIS[process-id]failedtocreatetheP2Padjacency.
","6","IS-IS创建点对点邻居失败.
","点对点邻居创建失败.
","AuthTLV不止一个.
","ISIS/6/DEL_ADJ_FAIL_NOSPCE","1.
正常运行信息,无需处理.
""DEL_ADJ_FAIL_NOSPCE","AC_RT_SEL_FAIL","ISIS[process-id]failedtodeletetheadjacencybecauseofinadequatespace.
","6","由于没有足够空间,IS-IS删除邻接失败.
","空间不够.
","AuthTLV不止一个.
","ISIS/6/DEL_ATTSY_FAIL","1.
正常运行信息,无需处理.
""DEL_ATTSY_FAIL","AC_RT_SEL_FAIL","ISIS[process-id]failedtodeletethelocalattachedsystem.
","6","IS-IS删除本地关联系统失败.
","ISIS/6/DEL_SUMMRT_URT_FAIL","AuthTLV不止一个.
","ISIS/6/CREATE_NBR_TLV_FAIL","1.
正常运行信息,无需处理.
""DEL_SUMMRT_URT_FAIL","AC_RT_SEL_FAIL","ISIS[process-id]failedtodeletetheNULL0routefromtheURTforsummary.
(MTID=[USHORT])","6","在指定拓扑中,IS-IS从单播路由表删除NULL0聚合路由失败.
","删除NULL0路由失败.
","添加Level-1聚合路由失败.
","ISIS/5/DEL_TLV_FAIL","ISIS/6/AC_RT_V6_SEL_FAIL""DEL_TLV_FAIL","AC_RT_SEL_FAIL","ISIS[process-id]failedtodeletetheTLV.
(NeighborSystemId=[STRING],TlvType=[USHORT])","Whenbeingaskedwhethertocommitthecommand"undobulk-statenable",theuserchoseN.
","IS-IS删除TLV失败.
","[process-id]:IS-IS进程号.
NeighborSystemId:邻居的系统ID.
TlvType:TLV类型值.
具体情况如下:·0x02:IS_NBR_TLV.
·0x16:IS_EXTENDED_IS_REACH_TLV.
·0x8a:IS_SRLG_TLV.
","对应的TLV没有找到,无法进行删除操作.
","1.
执行resetisis[process-id]命令,重新启动IS-IS进程.
","ISIS/6/DISABL_RT_FAIL""DISABL_RT_FAIL","AC_RT_SEL_FAIL","ISIS[process-id]failedtodisableISISIProuteontheinterface[interface-name].
","6","IS-IS在接口上取消IS-IS的IP路由使能失败.
","[process-id]:IS-IS进程号.
[interface-name]:接口名.
","1.
检查接口的路由状态.
","ISIS/6/CREATE_NBR_TLV_FAIL","ISIS/6/DISABLE_ROUTELEAK_V6""DISABLE_ROUTELEAK_V6","AC_RT_SEL_FAIL","ISIS[process-id]failedtodisableIPv6routeleaking.
","6","IS-IS去使能IPv6路由渗透失败.
","ISIS/6/DYNC_NAME_FAIL","AuthTLV不止一个.
","ISIS/6/CREATE_NBR_TLV_FAIL","1.
正常运行信息,无需处理.
""DYNC_NAME_FAIL","AC_RT_SEL_FAIL","ISIS[process-id]failedtocreatethedynamichostnameTLV.
","6","IS-IS创建动态主机名TLV失败.
","内存分配失败.
","AuthTLV不止一个.
","ISIS/6/FAIL_CMD_IN_AMB","1.
正常运行信息,无需处理.
""FAIL_CMD_IN_AMB","AC_RT_SEL_FAIL","ISISontheAMBfailedtoruncommands.
(FunctionID=[ULONG],DisableFlag=[ULONG])","6","IS-IS主板执行命令行失败.
","FunctionID:命令行的标识ID.
DisableFlag:命令行的去使能标识.
","不可预知的原因.
","ISIS/6/FAIL_CMD_IN_SMB","IFNET/5/ACOAM_STATE_CHANGE""FAIL_CMD_IN_SMB","AC_RT_SEL_FAIL","ISISontheSMBfailedtoruncommands.
(FunctionID=[ULONG],DisableFlag=[ULONG])","6","IS-IS备板执行命令行失败.
","多种导致备板执行命令行失败的原因.
","不可预知的原因.
","ISIS/6/FAIL_CRT_OPT_DYN_NM","IFNET/5/ACOAM_STATE_CHANGE""FAIL_CRT_OPT_DYN_NM","AC_RT_SEL_FAIL","ISIS[process-id]failedtocreatetheoptionfordynamichostname.
","6","IS-IS为动态主机名创建选项失败.
","ISIS/6/FAIL_SEND_DICT","AuthTLV不止一个.
","ISIS/6/CREATE_NBR_TLV_FAIL","1.
正常运行信息,无需处理.
""FAIL_SEND_DICT","AC_RT_SEL_FAIL","ISIS[process-id]failedtosendprotocoldictionarytothelowlayer.
(InterfaceIndex=[STRING])","6","IS-IS协议下发协议字典失败.
","[process-id]:IS-IS进程号.
InterfaceIndex:接口索引.
","对于协议字典处理失败.
","ISIS/6/FAIL_TRANS_P2P_CSNP","IFNET/5/ACOAM_STATE_CHANGE""FAIL_TRANS_P2P_CSNP","AC_RT_SEL_FAIL","ISIS[process-id]failedtotransmitP2PCSNPontheinterface[interface-name].
","6","IS-IS在接口上发送P2P的CSNP报文失败.
","重启中发生错误.
","1.
检查接口的路由状态.
","ISIS/6/FD_CUR_IFINDEX_FAIL","1.
正常运行信息,无需处理.
""FD_CUR_IFINDEX_FAIL","AC_RT_SEL_FAIL","ISIS[process-id]failedtofindcircuitentryaccordingtotheinterfaceindex[interface-index].
","6","IS-IS根据接口寻找链路失败.
","[process-id]:IS-IS进程号.
[interface-index]:接口索引.
","从接口号寻找链路失败.
","1.
查看指定接口信息.
","ISIS/6/FD_SBNTADDR_BDC_FAIL""FD_SBNTADDR_BDC_FAIL","AC_RT_SEL_FAIL","ISIS[process-id]failedtofindthematchedsubnetaddress[subnet-address]inbroadcastnetwork.
","6","IS-IS在广播网上寻找匹配的子网地址失败.
","[process-id]:IS-IS进程号.
[subnet-address]:子网地址.
","获取子网地址失败.
","1.
检查设备接口状态.
","ISIS/6/FIND_CIRCUIT_FAIL""FIND_CIRCUIT_FAIL","AC_RT_SEL_FAIL","FailedtofindISISinterfaceaccordingtotheinterfaceindex[interface-index].
","6","通过接口索引查找IS-IS接口失败.
","[interface-index]:接口索引.
","ISIS/6/FIND_SYSID_FAIL","ISIS/6/CREATE_NBR_TLV_FAIL","1.
正常运行信息,无需处理.
""FIND_SYSID_FAIL","AC_RT_SEL_FAIL","FailedtofindtheISISprocessID.
(InterfaceIndex=[STRING])","6","查找IS-IS进程号ID失败.
","InterfaceIndex:接口索引.
","ISIS/6/FLO_LSP_OLO_FAIL","ISIS/6/CREATE_NBR_TLV_FAIL","1.
正常运行信息,无需处理.
""FLO_LSP_OLO_FAIL","AC_RT_SEL_FAIL","ISIS[process-id]failedtofloodtheLSPwithoverloadbitset.
","6","overload置位的LSP不能泛洪.
","LSP泛洪失败.
","AuthTLV不止一个.
","ISIS/6/FT_GT_RT_URM_FAIL","1.
正常运行信息,无需处理.
""FT_GT_RT_URM_FAIL","AC_RT_SEL_FAIL","ISIS[process-id]failedtoobtaintherouteentry[route]fromURM.
(RouteEntryTable=[ULONG],EntryId=[ULONG],MTID=[USHORT],ReturnValue=[STRING])","6","IS-IS从URM获取路由失败.
","获取路由失败.
","选择路由失败.
","ISIS/6/GEN_ATT_LSP_FAIL","ISIS/6/AC_RT_V6_SEL_FAIL""GEN_ATT_LSP_FAIL","AC_RT_SEL_FAIL","ISIS[process-id]failedtogenerateanLSPwiththeATTbitbeingset.
","6","IS-IS生成具有ATT位的LSP失败.
","生成具有ATT标志位的LSP失败.
","AuthTLV不止一个.
","ISIS/4/GENLSPDESC_FAILSMB","1.
正常运行信息,无需处理.
""GENLSPDESC_FAILSMB","AC_RT_SEL_FAIL","ISIS[process-id]failedtogeneratetheLevel-[level]LSPfragmentontheslaveboard.
(LspId=[STRING],SeqNo=[ULONG])","4","备板IS-IS产生LSP分片失败.
","[process-id]:IS-IS进程号.
[level]:IS-IS级别.
LspId:LSPID.
SeqNo:LSP序列号.
","原因1:备板找不到对应的LSP分片.
原因2:为分片数据结构分配内存失败.
","ISIS/6/GET_IF_FAILSMB","CFM/4/RST_CFG""GET_IF_FAILSMB","AC_RT_SEL_FAIL","ISIS[process-id]failedtoobtaintheinterfaceaccordingtotheinterfaceindexontheslaveboard.
(InterfaceIndex=[STRING],MessageType=[STRING])","6","备板通过接口索引号获取接口失败.
","[process-id]:IS-IS进程号.
InterfaceIndex:接口索引号.
MessageType:LSP备份的消息类型,有如下几种:·SelfLSP:自己产生的LSP.
·OtherLSP:别人产生的LSP.
·AdjHello:备板收到的Hello.
·AdjDelete:删除邻居的相关信息.
·CircDis:DIS相关信息.
","原因1:备板接口与主板不一致.
原因2:备份的接口索引发生错误.
","1.
执行命令displayrminterface,查看主板的接口索引号与日志中的接口索引号是否相同.
·Y=>3.
·N=>2.
2.
(请谨慎重启)重启接口.
查看该日志是否重复出现.
·Y=>3.
·N=>4.
3.
请联系华为技术支持工程师.
4.
结束.
","ISIS/6/GET_IFINSTN_ID_FAIL""GET_IFINSTN_ID_FAIL","AC_RT_SEL_FAIL","FailedtoobtaininterfaceinstanceIDaccordingtothealias.
","6","通过别名获取接口实例ID失败.
","ISIS/6/GET_IFNET_BY_ALIAS","无:无","ISIS/6/GET_IFNET_BY_ALIAS","1.
正常运行信息,无需处理.
""GET_IFNET_BY_ALIAS","AC_RT_SEL_FAIL","FailedtoobtainIFNETthroughalias.
","6","通过别名获取IFNET失败.
","ISIS/6/GET_LINKINFO_FAIL","无:无","ISIS/6/CREATE_NBR_TLV_FAIL","1.
正常运行信息,无需处理.
""GET_LINKINFO_FAIL","AC_RT_SEL_FAIL","ISIS[process-id]failedtoobtainlinkinformation.
(InterfaceIndex=[STRING])","6","IS-IS不能获取链路信息.
","获取链路信息失败.
","对于协议字典处理失败.
","1.
检查接口配置.
","ISIS/6/GT_ACTVE_RT_RM_FAIL""GT_ACTVE_RT_RM_FAIL","AC_RT_SEL_FAIL","ISIS[process-id]failedtoobtainactiveroutefromRM.
(MTID=[USHORT])","6","IS-IS从RM获取活跃路由失败.
","ISIS/6/GT_CIRC_IFINDX_FAIL","添加Level-1聚合路由失败.
","ISIS/6/CREATE_NBR_TLV_FAIL","1.

正常运行信息,无需处理.
""GT_CIRC_IFINDX_FAIL","AC_RT_SEL_FAIL","ISIS[process-id]failedtoobtainthecircuitentryaccordingtotheinterfaceindex[interface-index].
","6","IS-IS从接口索引获取接口失败.
","ISIS/6/GT_CIRCINDEX_FAIL","从接口号寻找链路失败.
","ISIS/6/CREATE_NBR_TLV_FAIL","1.

正常运行信息,无需处理.
""GT_CIRCINDEX_FAIL","AC_RT_SEL_FAIL","ISIS[process-id]failedtoobtaininterfacenumber[interface-name].
","6","IS-IS获取接口号失败.
","1.
检查当前接口配置.
","1.
检查接口的路由状态.
","ISIS/6/CREATE_NBR_TLV_FAIL","ISIS/6/GT_INFO_RDM_FAIL""GT_INFO_RDM_FAIL","AC_RT_SEL_FAIL","ISIS[process-id]failedtoobtaininformationfromRDM.
(InterfaceIndex=[STRING])","6","IS-IS从RDM获取信息失败.
","获取信息失败.
","对于协议字典处理失败.
","ISIS/6/GT_ININDEX_FAIL","1.

正常运行信息,无需处理.
""GT_ININDEX_FAIL","AC_RT_SEL_FAIL","ISIS[process-id]failedtoobtaininterfaceindex[interface-index].
","6","取得接口号失败.
","1.
检查当前接口配置.
","从接口号寻找链路失败.
","1.
检查接口状态.
","ISIS/6/GT_LGC_PHY_FAIL""GT_LGC_PHY_FAIL","AC_RT_SEL_FAIL","ISIS[process-id]failedtoobtaintheprimarylogicalindex[logical-index]throughphysicalindex[physical-index].
","6","IS-IS获取逻辑接口失败.
","[process-id]:IS-IS进程号.
[logical-index]:逻辑接口号.
[physical-index]:物理接口号.
","获取逻辑接口失败.
","1.
检查物理接口.
","ISIS/6/GT_LGCIF_V6ADDR_FAIL""GT_LGCIF_V6ADDR_FAIL","AC_RT_SEL_FAIL","ISIS[process-id]failedtoobtainlogicalindex[logical-index]fromIPv6linklocaladdress[ipv6-address].
","6","[process-id]:IS-IS进程号.
[logical-index]:逻辑接口号.
[ipv6-address]:IPV6地址.
","[process-id]:IS-IS进程号.
[logical-index]:逻辑接口号.
[physical-index]:物理接口号.
","1.
检查当前本地IP配置.
","1.
检查物理接口.
","ISIS/6/GT_LGCL_SUBNET_FAIL""GT_LGCL_SUBNET_FAIL","AC_RT_SEL_FAIL","ISIS[process-id]failedtoobtainthelogicalindexforlocalsubnetwhilematchingthenexthopaddress[nexthop].
(PhysicalIndex=[ULONG])","6","ISIS为本地子网获取逻辑接口号,在匹配下一跳地址的时候失败.
","[process-id]:IS-IS进程号.
[nexthop]:下一跳地址.
PhysicalIndex:接口号.
","获取接口失败.
","ISIS/6/GT_LV_RT_URM_FAIL","1.
正常运行信息,无需处理.
""GT_LV_RT_URM_FAIL","AC_RT_SEL_FAIL","ISIS[process-id]failedtoobtainLevel-[level]routeentry[route]fromURM.
(RouteEntryTable=[ULONG],EntryId=[ULONG],MTID=[USHORT],ReturnValue=[STRING])","6","IS-IS从URM中获取路由失败.
","[process-id]:IS-IS进程号.
[level]:IS-IS级别.
[route]:路由.
RouteEntryTable:路由表.
EntryId:入口号.
MTID:拓扑ID.
ReturnValue:返回值.
","ISIS/6/GT_LV_RT_V6_URM_FAIL","ISIS/6/GEN_ATT_LSP_FAIL","ISIS/6/AC_RT_V6_SEL_FAIL""GT_LV_RT_V6_URM_FAIL","AC_RT_SEL_FAIL","ISIS[process-id]failedtoobtainLevel-[level]IPv6routeentry[route]fromURM.
(RouteEntryTable=[ULONG],EntryId=[ULONG],MTID=[USHORT],ReturnValue=[STRING])","6","IS-IS从URM中获取IPv6路由失败.
","获取IPv6路由失败.
","ISIS/6/GT_LV_RT_V6_URM_FAIL","ISIS/6/GT_PHYIF_IFNET_FAIL","ISIS/6/AC_RT_V6_SEL_FAIL""GT_PHYIF_IFNET_FAIL","AC_RT_SEL_FAIL","ISIS[process-id]failedtoobtainphysicalindexfromtheinterface[interface-name].
","6","IS-IS从接口获取物理接口号失败.
","ISIS/6/GT_RTENTRY_URM_FAIL","1.
检查接口的路由状态.
","ISIS/6/GT_LV_RT_URM_FAIL","ISIS/6/GT_LGCIF_V6ADDR_FAIL""GT_RTENTRY_URM_FAIL","AC_RT_SEL_FAIL","ISIS[process-id]failedtoobtaintherouteentryfromURM.
(EntryId=[ULONG],MTID=[USHORT])","6","[process-id]:IS-IS进程号.
EntryId:入口号.
MTID:拓扑ID.
","[process-id]:IS-IS进程号.
[level]:IS-IS级别.
[route]:路由.
RouteEntryTable:路由表.
EntryId:入口号.
MTID:拓扑ID.
ReturnValue:返回值.
","获取路由入口失败.
","ISIS/6/GT_RTID_RM_FAIL","ISIS/6/AC_RT_V6_SEL_FAIL""GT_RTID_RM_FAIL","AC_RT_SEL_FAIL","ISIS[process-id]failedtoobtainrouterIDfromRM.
(RouterId=[ULONG])","6","IS-IS从RM获取路由器ID失败.
","[process-id]:IS-IS进程号.
RouterId:路由器ID.
","从RM获取路由器ID失败.
","1.
重新查看.
","ISIS/6/GT_V6_PHYIF_FAIL""GT_V6_PHYIF_FAIL","AC_RT_SEL_FAIL","ISIS[process-id]failedtoobtaintheIPv6physicalindex[physical-index]fromtheinterface.
(InterfaceIndex=[STRING])","6","IS-IS从接口获取IPv6的物理接口失败.
","[process-id]:IS-IS进程号.
[physical-index]:物理接口号.
InterfaceIndex:接口索引.
","获取物理接口失败.
","1.
检查当前接口状态.
","ISIS/6/GT_V6ADDR_PHYIF_FAIL""GT_V6ADDR_PHYIF_FAIL","AC_RT_SEL_FAIL","ISIS[process-id]failedtoobtaintheIPv6linklocaladdress[ipv6-address]fromthephysicalinterface[physical-interface].
","6","IS-IS获取IPv6链路本地地址失败.
","[process-id]:IS-IS进程号.
[ipv6-address]:IPV6地址.
[physical-interface]:物理接口号.
","获取IPv6地址失败.
","1.
检查当前接口地址状态.
","ISIS/6/IF_TEMP""IF_TEMP","AC_RT_SEL_FAIL","Theinterfacewasatemporaryinterface.
(IsisProcessId=[USHORT],InterfaceIndex=[STRING])","6","该接口为临时接口.
","IsisProcessId:IS-IS进程号.
InterfaceIndex:接口索引.
","ISIS/4/IMPORT_LIMIT_EXCEED","ISIS/6/ADD_REDSTRBT_RT_FAIL","1.
正常运行信息,无需处理.
""IMPORT_LIMIT_EXCEED","AC_RT_SEL_FAIL","ISIS[process-id]Thenumberoflevel-[level]importedrouteshasexceededthemaximumlimit.
(sysMTIndex=[USHORT],sysMaxLimit=[ULONG],sysTotalRedist=[ULONG])","4","IS-IS区域引入外部路由的数量已经超过最大路由限制.
","[process-id]:IS-IS进程号.
[level]:IS-IS级别.
sysMTIndex:拓扑ID.
sysMaxLimit:允许引入路由数量的最大值.
sysTotalRedist:引入的路由数量.
","IS-IS进程引入的外部路由数超过了设置的最大发布路由限制.
","1.
删除部分引入的外部路由.
","ISIS/4/IMPORT_LIMIT_RESTORE""IMPORT_LIMIT_RESTORE","AC_RT_SEL_FAIL","ISIS[process-id]Thenumberoflevel-[level]importedroutesisrestoredtolessthanorequaltothemaximumlimit.
(sysMTIndex=[USHORT],sysMaxLimit=[ULONG],sysTotalRedist=[ULONG])","4","IS-IS引入外部路由的数量减少到最大路由限制以内.
","IS-IS区域引入的外部路由数量由超限状态进入未超限状态.
","IS-IS进程引入的外部路由数超过了设置的最大发布路由限制.
","ISIS/6/INIT_DEC_FAIL","1.

正常运行信息,无需处理.
""INIT_DEC_FAIL","AC_RT_SEL_FAIL","ISIS[process-id]failedtoinitializethedecisionmodule.
","6","IS-IS初始化decision模块失败.
","模块初始化失败.
","AuthTLV不止一个.
","ISIS/6/INTI_ISIS_FAIL","1.
正常运行信息,无需处理.
""INTI_ISIS_FAIL","AC_RT_SEL_FAIL","ISIS[process-id]failedtoinitializeISISprotocolmodules.
","6","初始化IS-IS模块失败.
","ISIS/4/INT_BUILDRUN_FAIL","AuthTLV不止一个.
","ISIS/6/CREATE_NBR_TLV_FAIL","1.
正常运行信息,无需处理.
""INT_BUILDRUN_FAIL","AC_RT_SEL_FAIL","ISISfailedtobuildrunforinterface[STRING],operatecode=[USHORT],returnvalue=[USHORT].
","4","IS-IS生成接口的配置信息失败.
","[STRING]:接口名.
[USHORT]:操作码,分别为:·1:获取接口索引号.
·2:获取接口名.
[USHORT]:返回值.
","ISIS/6/JN_MTCAST_ADDR_FAIL","ISIS/6/GT_LV_RT_URM_FAIL","CFM/4/RST_CFG""JN_MTCAST_ADDR_FAIL","AC_RT_SEL_FAIL","Failedtojointhemulticastgroup.
(InterfaceIndex=[STRING],ReturnValue=[[LONG]])","6","加入多播组失败.
","InterfaceIndex:接口索引.
ReturnValue:返回值.
","ISIS/6/JOIN_L1_ADDR_FAIL","InterfaceIndex:接口索引.
ReturnValue:返回值.
","ISIS/6/GT_ACTVE_RT_RM_FAIL""JOIN_L1_ADDR_FAIL","AC_RT_SEL_FAIL","ISIS[process-id]failedtojoinallLevel-1multicastgroupfortheinterface[interface-name].
","6","IS-IS为接口加入所有Level-1多播组失败.
","ISIS/6/JOIN_L2_ADDR_FAIL","1.
检查接口的路由状态.
","InterfaceIndex:接口索引.
ReturnValue:返回值.
","ISIS/5/CIRC_STATE_SET""JOIN_L2_ADDR_FAIL","AC_RT_SEL_FAIL","ISIS[process-id]failedtojoinallLevel-2multicastgroupfortheinterface[STRING].
","6","IS-IS为接口加入所有Level-2多播组失败.
","[process-id]:IS-IS进程号.
[STRING]:接口名.
","ISIS/6/LDP_INFORM_RM_ENAB","InterfaceIndex:接口索引.
ReturnValue:返回值.
","ISIS/5/CIRC_STATE_SET""LDP_INFORM_RM_ENAB","AC_RT_SEL_FAIL","IS-IS[process-id]informedRMthatldp-syncwasenabledinterface[STRING].
","6","IS-IS通知RM接口使能ldp-sync.
","[process-id]:IS-IS进程号[STRING]:接口名","IS-IS使能和LDP的同步功能.
","ISIS/6/LEAVE_L1_ADDR_FAIL","1.
正常运行信息,无需处理.
""LEAVE_L1_ADDR_FAIL","AC_RT_SEL_FAIL","ISIS[process-id]failedtoleaveallLevel-1multicastgrouponthecircuit[interface-name].
","6","IS-IS在接口上离开所有Level-1多播组失败.
","离开多播组失败.
","1.
检查接口的路由状态.
","ISIS/6/LEAVE_L2_ADDR_FAIL","ISIS/5/CIRC_STATE_SET""LEAVE_L2_ADDR_FAIL","AC_RT_SEL_FAIL","ISIS[process-id]failedtoleaveallLevel-2multicastgrouponthecircuit[interface-name].
","6","IS-IS在接口上离开所有Level-2多播组失败.
","ISIS/6/LEAVE_ALLIS_ADDR_FAIL","1.

检查接口的路由状态.
","ISIS/6/LEAVE_L2_ADDR_FAIL","ISIS/5/CIRC_STATE_SET""LEAVE_ALLIS_ADDR_FAIL","AC_RT_SEL_FAIL","ISIS[process-id]failedtoleaveALLISmulticastgrouponthecircuit[interface-name].
","6","IS-IS将某个接口退出组播组失败.
","调用Socket函数失败.
","1.
检查接口的路由状态.
","ISIS/5/LOCALSYS_DIS_REST_RT","CFM/4/RST_CFG""LOCALSYS_DIS_REST_RT","AC_RT_SEL_FAIL","LocalsystemwasDISamongISISrestartedcapablerouters.
","Whenbeingaskedwhethertocommitthecommand"undobulk-statenable",theuserchoseN.
","在IS-IS中具有重启能力的设备中,本地系统选举成为DIS.
","广播网收到restartTLV中带RR位的IIH,进行临时DIS选举.
","无:无","ISIS/6/LV_MTCAST","1.
正常运行信息,无需处理.
""LV_MTCAST","AC_RT_SEL_FAIL","ISISleavesmulticastgroupsbecauseISISreceivedpacketonunknowninterface[interface-name].
","6","IS-IS离开组播组,由于在未知接口上收到报文.
","在未知接口上收到报文","接口转变为不可用状态.
","ISIS/6/LV_MTCAST_ADDR_FAIL","1.

正常运行信息,无需处理.
""LV_MTCAST_ADDR_FAIL","AC_RT_SEL_FAIL","Failedtoleavethemulticastgroup.
(InterfaceIndex=[STRING],ReturnValue=[ULONG])","6","ISIS/6/MATCH_CIRC_FAIL","ISIS/6/LEAVE_L2_ADDR_FAIL","ISIS/6/JOIN_L1_ADDR_FAIL","ISIS/6/LEAVE_L2_ADDR_FAIL","ISIS/6/GT_ACTVE_RT_RM_FAIL""MATCH_CIRC_FAIL","AC_RT_SEL_FAIL","ISIS[process-id]failedtomatchinterfaceaddress.
(InterfaceIndex=[STRING])","6","IS-IS不能匹配接口地址.
","匹配接口失败.
","对于协议字典处理失败.
","1.
重新设置.
","ISIS/6/MD_LV_RT_FAIL""MD_LV_RT_FAIL","AC_RT_SEL_FAIL","ISIS[process-id]failedtomodifyLevel-[level]routeentry[route].
(EntryId=[ULONG],MTID=[USHORT],ReturnValue=[STRING])","6","IS-IS更改路由失败.
","[process-id]:IS-IS进程号.
[level]:IS-IS级别.
[route]:路由.
EntryId:入口号.
MTID:拓扑ID.
ReturnValue:返回值.
","更改路由失败.
","ISIS/6/MD_LV_RT_V6_FAIL","ISIS/6/AC_RT_V6_SEL_FAIL""MD_LV_RT_V6_FAIL","AC_RT_SEL_FAIL","ISIS[process-id]failedtomodifyLevel-[level]IPv6routeentry[route].
(EntryId=[ULONG],MTID=[USHORT],ReturnValue=[STRING])","6","IS-IS更改IPv6路由失败.
","ISIS/6/MTU_EXCEED_MAXPDU","更改路由失败.
","ISIS/6/MD_LV_RT_V6_FAIL","ISIS/6/AC_RT_V6_SEL_FAIL""MTU_EXCEED_MAXPDU","AC_RT_SEL_FAIL","TheMTUsize[mtu-size]exceededthemaximumPDUsize[pdu-size],andsettheMTUtothemaximumPDUsize.
(IsisProcessId=[USHORT],InterfaceIndex=[STRING])","6","MTU尺寸超过最大PDU尺寸,设置其为最大PDU尺寸.
","[mtu-size]:MTU尺寸.
[pdu-size]:最大PDU尺寸.
IsisProcessId:IS-IS进程号.
InterfaceIndex:接口索引.
","MTU设置过大.
","ISIS/6/P2P_CIRC_TX_LSP_FAIL","ISIS/6/MD_LV_RT_FAIL""P2P_CIRC_TX_LSP_FAIL","AC_RT_SEL_FAIL","ISIS[process-id]failedtotransmitLSPonthep2pcircuit.
(CircuitName=[string])","6","p2p链路上LSP发送失败.
","[process-id]:IS-IS进程号.
CircuitName:接口名.
","p2p接口发送报文失败.
","1.
检查当前报文信息.
","ISIS/4/PEER_DOWN_CIRC_DOWN""PEER_DOWN_CIRC_DOWN","AC_RT_SEL_FAIL","ISIS[process-id]neighbor[neighbor]wasDownbecauseinterface[interface-name]wasDown.
TheHellopacketwasreceivedat[hello-time]lasttime;themaximumintervalforsendingHellopacketswas[max-interval];thelocalRoutersent[send-number]Hellopacketsandreceived[receive-number]packets;thetypeoftheHellopacketwas[packet-type].
","4","由于接口Down,IS-IS邻居Down.
","[process-id]:IS-IS进程号.
[neighbor]:邻居的系统ID.
[interface-name]:接口名称.
[hello-time]:上次收到Hello报文的时间.
[max-interval]:发送最大间隔.
[send-number]:发送hello报文的个数.
[receive-number]:接收hello报文的个数.
[packet-type]:Hello报文的类型.
具体情况如下·P2P:P2PHello报文.
·LanLevel-1:Level-1广播网Hello报文.
·LanLevel-2:Level-2广播网Hello报文.
","原因1:执行了shutdown命令.
原因2:接口其他异常.
","1.
判断是否需要在接口上建立邻居.
·Y=>2.
·N=>3.
2.
执行displayrminterfaceverbose命令保存并联系华为技术支持工程师.
3.
结束.
","ISIS/4/PEER_DOWN_DIS_CHANGE""PEER_DOWN_DIS_CHANGE","AC_RT_SEL_FAIL","IS-IS[process-id]neighbor[neighbor]wasDownoninterface[interface-name]becausetheDISchanged.
TheHellopacketwasreceivedat[hello-time]lasttime;themaximumintervalforsendingHellopacketswas[max-interval];thelocalRoutersent[send-number]Hellopacketsandreceived[receive-number]packets;thetypeoftheHellopacketwas[packet-type].
","4","由于DIS变化,IS-IS邻居在接口上Down.
","[process-id]:IS-IS进程号.
[neighbor]:邻居的系统ID.
[interface-name]:接口名称.
[hello-time]:上次收到Hello报文的时间.
[max-interval]:发送最大间隔.
[send-number]:发送Hello报文的个数.
[receive-number]:接收Hello报文的个数.
[packet-type]:Hello报文的类型.
具体情况如下·P2P:P2PHello报文.
·LanLevel-1:Level-1广播网Hello报文.
·LanLevel-2:Level-2广播网Hello报文.
","广播网的DIS变化,导致IS-IS邻居Down.
","ISIS/4/PEER_DOWN_LOW_MEMORY","FWD/4/SESSCTRLEND""PEER_DOWN_LOW_MEMORY","AC_RT_SEL_FAIL","ISIS[process-id]neighbor[neighbor]wasDownoninterface[interface-name]becausememorywasnotenough.
TheHellopacketwasreceivedat[hello-time]lasttime;themaximumintervalforsendingHellopacketswas[max-interval];thelocalRoutersent[send-number]Hellopacketsandreceived[receive-number]packets;thetypeoftheHellopacketwas[packet-type];CPUusagewas[cpu-percent]%.
","4","由于内存空间不足,IS-IS邻居在接口上Down.
","[process-id]:IS-IS进程号.
[neighbor]:邻居的系统ID.
[interface-name]:接口名称.
[hello-time]:上次收到Hello报文的时间.
[max-interval]:发送最大间隔.
[send-number]:发送Hello报文的个数.
[receive-number]:接收Hello报文的个数.
[packet-type]:Hello报文的类型.
具体情况如下·P2P:P2PHello报文.
·LanLevel-1:Level-1广播网Hello报文.
·LanLevel-2:Level-2广播网Hello报文.
[cpu-percent]:CPU使用率.
","内存空间不足,导致邻居Down.
","ISIS/4/PEER_DOWN_NO_MEMORY","IFNET/5/ACOAM_STATE_CHANGE""PEER_DOWN_NO_MEMORY","AC_RT_SEL_FAIL","ISIS[process-id]neighbor[neighbor]wasDownoninterface[interface-name]becausethememoryofRMwasnotenough.
TheHellopacketwasreceivedat[hello-time]lasttime;themaximumintervalforsendingHellopacketswas[max-interval];thelocalRoutersent[send-number]Hellopacketsandreceived[receive-number]packets;thetypeoftheHellopacketwas[packet-type];CPUusagewas[cpu-percent]%.
","4","由于RM内存不足,IS-IS邻居在接口上Down.
","RM内存不足,导致IS-IS邻居Down.
","内存空间不足,导致邻居Down.
","ISIS/4/PEER_DOWN_REPTADJ","IFNET/5/ACOAM_STATE_CHANGE""PEER_DOWN_REPTADJ","AC_RT_SEL_FAIL","ISIS[process-id]neighbor[neighbor]wasDownoninterface[interface-name]becausearepeatedneighborwasfound.
TheHellopacketwasreceivedat[hello-time]lasttime;themaximumintervalforsendingHellopacketswas[max-interval];thelocalRoutersent[send-number]Hellopacketsandreceived[receive-number]packets;thetypeoftheHellopacketwas[packet-type].
","4","由于发现了重复的邻居,IS-IS邻居在接口上Down.
","发现了一个重复的邻居,导致邻居Down.
","广播网的DIS变化,导致IS-IS邻居Down.
","ISIS/4/PEER_DOWN_REPTP2PADJ","IFNET/5/ACOAM_STATE_CHANGE""PEER_DOWN_REPTP2PADJ","AC_RT_SEL_FAIL","ISIS[process-id]neighbor[neighbor]wasDownoninterface[interface-name]becauserepeatedP2Pneighborswerefound.
TheHellopacketwasreceivedat[hello-time]lasttime;themaximumintervalforsendingHellopacketswas[max-interval];thelocalRoutersent[send-number]Hellopacketsandreceived[receive-number]packets;thetypeoftheHellopacketwas[packet-type].
","4","由于发现了重复的P2P邻居,IS-IS邻居在接口上Down.
","发现了一个重复的P2P邻居,导致IS-IS邻居Down.
","广播网的DIS变化,导致IS-IS邻居Down.
","ISIS/4/PEER_DWN_ADJ_STATDWN","IFNET/5/ACOAM_STATE_CHANGE""PEER_DWN_ADJ_STATDWN","AC_RT_SEL_FAIL","ISIS[process-id]neighbor[neighbor]wasDownoninterface[interface-name]becausetheadjacencystatuschangedintoDown.
TheHellopacketwasreceivedat[hello-time]lasttime;themaximumintervalforsendingHellopacketswas[max-interval];thelocalRoutersent[send-number]Hellopacketsandreceived[receive-number]packets;thetypeoftheHellopacketwas[packet-type].
","4","由于邻居状态变为Down,IS-IS邻居在接口上Down.
","邻居状态变为Down,导致IS-IS邻居Down.
","广播网的DIS变化,导致IS-IS邻居Down.
","1.

判断是否需要在接口上建立邻居.
·Y=>2.
·N=>4.
2.
查看邻居的状态.
3.
请联系华为技术支持工程师.
4.
结束.
","ISIS/4/PEER_DWN_AREAMISMACH""PEER_DWN_AREAMISMACH","AC_RT_SEL_FAIL","ISIS[process-id]neighbor[neighbor]wasDownoninterface[interface-name]becauseareamismatched.
TheHellopacketwasreceivedat[hello-time]lasttime;themaximumintervalforsendingHellopacketswas[max-interval];thelocalRoutersent[send-number]Hellopacketsandreceived[receive-number]packets;thetypeoftheHellopacketwas[packet-type].
","4","由于区域不匹配,IS-IS邻居在接口上Down.
","区域地址不匹配,导致IS-IS邻居Down.
","广播网的DIS变化,导致IS-IS邻居Down.
","1.

判断是否需要在接口上建立邻居.
·Y=>2.
·N=>3.
2.
执行is-level命令将两台路由设备配置为符合建立邻居条件的Level级别.
如果级别正确,则执行network-entity命令重新配置路由设备的NET.
3.
结束.
","ISIS/4/PEER_DWN_CIRC_SILENT""PEER_DWN_CIRC_SILENT","AC_RT_SEL_FAIL","ISIS[process-id]neighbor[neighbor]wasDownbecausesilentissetoninterface[interface-name].
TheHellopacketwasreceivedat[hello-time]lasttime;themaximumintervalforsendingHellopacketswas[max-interval];thelocalRoutersent[send-number]Hellopacketsandreceived[receive-number]Hellopackets;thetypeoftheHellopacketwas[packet-type].
","4","由于接口设置了silent,IS-IS邻居Down.
","接口被设置为抑制状态,导致IS-IS邻居Down.
","广播网的DIS变化,导致IS-IS邻居Down.
","1.

判断是否需要在接口上建立邻居.
·Y=>2.
·N=>3.
2.
执行undoisissilent命令取消接口的抑制状态.
3.
结束.
","ISIS/4/PEER_DWN_HLDTMR_EXPR""PEER_DWN_HLDTMR_EXPR","AC_RT_SEL_FAIL","ISIS[process-id]neighbor[neighbor]wasDownoninterface[interface-name]becauseholdtimerexpired.
TheHellopacketwasreceivedat[hello-time]lasttime;themaximumintervalforsendingHellopacketswas[max-interval];thelocalRoutersent[send-number]Hellopacketsandreceived[receive-number]packets;thetypeoftheHellopacketwas[packet-type];CPUusagewas[cpu-percent]%.
","4","由于holdtimer到期,IS-IS邻居在接口上Down.
","在holdtimer规定的时间内没有收到邻居的Hello报文,导致IS-IS邻居Down.
","内存空间不足,导致邻居Down.
","1.
判断是否需要在接口上建立邻居.
·Y=>2.
·N=>4.
2.
查看邻居设备的状态.
3.
请联系华为技术支持工程师.
4.
结束.
","ISIS/4/PEER_DWN_ID_CONFLICT""PEER_DWN_ID_CONFLICT","AC_RT_SEL_FAIL","ISIS[process-id]neighbor[neighbor]wasDownoninterface[interface-name]becauseP2PcircuitIDconflict.
TheHellopacketwasreceivedat[hello-time]lasttime;themaximumintervalforsendingHellopacketswas[max-interval];thelocalRoutersent[send-number]Hellopacketsandreceived[receive-number]packets;thetypeoftheHellopacketwas[packet-type].
","4","由于P2PCircuitID冲突,IS-IS邻居在接口上Down.
","P2P链路的circuitID冲突,导致IS-IS邻居Down.
","广播网的DIS变化,导致IS-IS邻居Down.
","ISIS/4/PEER_DWN_LEVEL_CHANG","IFNET/5/ACOAM_STATE_CHANGE""PEER_DWN_LEVEL_CHANG","AC_RT_SEL_FAIL","ISIS[process-id]neighbor[neighbor]wasDownoninterface[interface-name]becauseadjacencylevelwaschanged.
TheHellopacketwasreceivedat[hello-time]lasttime;themaximumintervalforsendingHellopacketswas[max-interval];thelocalRoutersent[send-number]Hellopacketsandreceived[receive-number]packets;thetypeoftheHellopacketwas[packet-type].
","4","由于邻居Level改变,IS-IS邻居在接口上Down.
","邻居的Level级别改变,导致IS-IS邻居Down.
","广播网的DIS变化,导致IS-IS邻居Down.
","1.

判断是否需要在接口上建立邻居.
·Y=>2.
·N=>3.
2.
执行is-level命令将两台路由设备配置为符合建立邻居条件的Level级别.
3.
结束.
","ISIS/4/PEER_DWN_PDUMISMATCH""PEER_DWN_PDUMISMATCH","AC_RT_SEL_FAIL","ISIS[process-id]neighbor[neighbor]wasDownoninterface[interface-name]becausethePDUmismatched.
TheHellopacketwasreceivedat[hello-time]lasttime;themaximumintervalforsendingHellopacketswas[max-interval];thelocalRoutersent[send-number]Hellopacketsandreceived[receive-number]packets;thetypeoftheHellopacketwas[packet-type].
","4","由于报文不匹配,IS-IS邻居在接口上Down.
","报文类型不匹配,导致IS-IS邻居Down.
","广播网的DIS变化,导致IS-IS邻居Down.
","ISIS/4/PEER_DWN_SYS_DISABLE","IFNET/5/ACOAM_STATE_CHANGE""PEER_DWN_SYS_DISABLE","AC_RT_SEL_FAIL","ISIS[process-id]neighbor[neighbor]wasDownoninterface[interface-name]becauseISISwasdisabled.
TheHellopacketwasreceivedat[hello-time]lasttime;themaximumintervalforsendingHellopacketswas[max-interval];thelocalRoutersent[send-number]Hellopacketsandreceived[receive-number]packets;thetypeoftheHellopacketwas[packet-type].
","4","由于IS-IS去使能,IS-IS邻居在接口上Down.
","IS-IS去使能,导致邻居Down.
","广播网的DIS变化,导致IS-IS邻居Down.
","ISIS/4/PEER_DWN_SYSTYP_UNKN","1.

正常运行信息,无需处理.
""PEER_DWN_SYSTYP_UNKN","AC_RT_SEL_FAIL","ISIS[process-id]neighbor[neighbor]wasDownoninterface[interface-name]becausethesystemtypewasunknown.
TheHellopacketwasreceivedat[hello-time]lasttime;themaximumintervalforsendingHellopacketswas[max-interval];thelocalRoutersent[send-number]Hellopacketsandreceived[receive-number]packets;thetypeoftheHellopacketwas[packet-type].
","4","由于未知的系统类型,IS-IS邻居在接口上Down.
","邻居的系统类型未知,导致IS-IS邻居Down.
","广播网的DIS变化,导致IS-IS邻居Down.
","ISIS/5/PEER_UP_ADJ_CREATE","IFNET/5/ACOAM_STATE_CHANGE""PEER_UP_ADJ_CREATE","AC_RT_SEL_FAIL","ISISprocessid[process-id]neighbor[system-id]ontheinterface[interface-name]isup.
","Whenbeingaskedwhethertocommitthecommand"undobulk-statenable",theuserchoseN.
","IS-IS邻居在接口上Up.
","[process-id]:IS-IS进程号.
[system-id]:邻居的系统ID.
[interface-name]:接口名称.
","IS-IS邻居Up.
","ISIS/6/PROCESS_TMR_EVENT","1.
正常运行信息,无需处理.
""PROCESS_TMR_EVENT","AC_RT_SEL_FAIL","AtimerexpiredwhenISISprocesswasinvalid.
(TimerEvent=[ULONG],ProcessId=[ULONG])","6","进程无效时有定时器超时.
","TimerEvent:定时器类型.
ProcessId:IS-IS进程ID.
","ISIS/4/RCV_ERRSELFLSP_SMB","TimerEvent:定时器类型.
ProcessId:IS-IS进程ID.
","1.
正常运行信息,无需处理.
""RCV_ERRSELFLSP_SMB","AC_RT_SEL_FAIL","ISIS[process-id]receivedanincorrectbackupselfLSPontheslaveboard.
(LspId=[STRING],Level=[STRING],Reason=[STRING],SeqNum=[STRING],TlvType=[USHORT],TlvLength=[USHORT])","4","备板收到错误的self-LSP.
","[process-id]:IS-IS进程号.
LspId:LSPID.
Level:IS-IS级别.
Reason:错误原因,有如下几种:·WrongLSPlength:收到LSP长度错误.
·WrongTLVlength:TLV长度错误.
·ReceivereduplicateTLV:收到重复的TLV.
·WrongTLVplace:TLV位置错误.
·EncodingafterNbrTLV:IS-IS在NBRTLV之后收到区域地址TLV.
·DetectinvalidMTID:检测到不可用的MTID.
·WrongTLVformat:TLV格式错误.
·UnknownTLVtype:未知的TLV类型.
·Hadreceivedmorethanthreeareaaddress(es):已经收到了超过三个区域地址.
·Receivedtoolongareaaddress:收到超长的区域地址.
·Receivedwrongareaaddresslength:区域地址TLV长度错误.
·Receivedinvalidareaaddress:当前区域地址不可用.
·Receivedmorethanthreeareaaddress(es):该TLV发布了超过三个区域地址.
SeqNum:LSP序列号.
TlvType:TLV类型.
TlvLength:TLV长度.
","1.
搜集Debug信息和日志并联系华为技术支持工程师.
","[process-id]:IS-IS进程号.
LspId:LSPID.
Level:IS-IS级别.
Reason:错误原因,有如下几种:·WrongLSPlength:收到LSP长度错误.
·WrongTLVlength:TLV长度错误.
·ReceivereduplicateTLV:收到重复的TLV.
·WrongTLVplace:TLV位置错误.
·EncodingafterNbrTLV:IS-IS在NBRTLV之后收到区域地址TLV.
·DetectinvalidMTID:检测到不可用的MTID.
·WrongTLVformat:TLV格式错误.
·UnknownTLVtype:未知的TLV类型.
·Hadreceivedmorethanthreeareaaddress(es):已经收到了超过三个区域地址.
·Receivedtoolongareaaddress:收到超长的区域地址.
·Receivedwrongareaaddresslength:区域地址TLV长度错误.
·Receivedinvalidareaaddress:当前区域地址不可用.
·Receivedmorethanthreeareaaddress(es):该TLV发布了超过三个区域地址.
SeqNum:LSP序列号.
TlvType:TLV类型.
TlvLength:TLV长度.
","ISIS/6/RCV_OWN_PURGED_LSP""RCV_OWN_PURGED_LSP","AC_RT_SEL_FAIL","ISIS[process-id]receivedanownpurgedLSP.
(Level=[USHORT],PduLspId=[STRING],Interface=[STRING],NbrSystem=[STRING],SrcSystem=[STRING],SrcDynName=[STRING])","6","IS-IS系统接收到一个其它系统发送过来的、本地设备产生的剩余时间为0的LSP报文.
","[process-id]:IS-IS进程号.
Level:IS-IS级别.
PduLspId:收到的purgedLSPID.
Interface:收到purgedLSP报文的接口.
NbrSystem:邻居系统ID.
SrcSystem:发送LSP报文的源设备系统ID.
SrcDynName:发送LSP报文的源设备动态主机名.
","·原因1:本地路由器没有及时刷新自己的LSP,导致本地产生的LSP超时老化后产生的purge报文泛洪到本地路由器.
·原因2:因传输故障等原因导致报文被改写,并触发报文purge.
·原因3:本地路由器整机重启或进程Reset后重新收到本地发送的剩余时间为0的LSP.
","1.
检查本地路由器是否整机重启.
·Y=>正常运行信息,无需处理·N=>22.
查看日志信息中的SrcSystem字段是否填充.
·Y=>查看发送该LSP的对端路由器的系统ID,执行步骤4·N=>33.
查看日志信息中的NbrSystem字段,找到对端路由器并下载日志,查看该LSP是否由此路由器发出.
·Y=>4·N=>54.
在源路由器上分析此LSP是否已清除.
·Y=>正常运行信息,无须处理·N=>55.
逐个排查产生剩余时间为0的LSP的源路由器,执行步骤4.
6.
请收集相关显示信息,并联系华为技术工程师.
7.
结束.
","ISIS/6/RCV_OTHER_PURGED_LSP""RCV_OTHER_PURGED_LSP","AC_RT_SEL_FAIL","ISIS[process-id]receivedapurgedLSP.
(Level=[USHORT],PduLspId=[STRING],Interface=[STRING],NbrSystem=[STRING],SrcSystem=[STRING],SrcDynName=[STRING])","6","IS-IS系统收到一个其它系统产生的剩余时间为0的LSP报文.
","[process-id]:IS-IS进程号.
Level:IS-IS级别.
PduLspId:收到的purgedLSP报文ID.
Interface:收到purgedLSP报文的接口.
NbrSystem:邻居系统ID.
SrcSystem:发送LSP报文的源设备系统ID.
SrcDynName:发送LSP报文的源设备动态主机名.
","一个IS-IS系统收到其他系统生成的剩余时间为0的LSP报文,即purgedLSP.
","1.
查看日志信息中的SrcSystem字段是否填充.
·Y=>查看发送该LSP报文的路由器系统ID,执行步骤3·N=>22.
查看日志信息中的NbrSystem字段,找到对端路由器并下载日志,查看该LSP是否由此路由器发出.
·Y=>3·N=>43.
在源路由器上分析此LSP是否已清除.
·Y=>正常运行信息,无须处理·N=>44.
逐个排查产生剩余时间为0的LSP的源路由器,执行步骤3.
5.
请收集相关显示信息,并联系华为技术工程师.
6.
结束.
","ISIS/6/REA_MAX_SEQ_NUM""REA_MAX_SEQ_NUM","AC_RT_SEL_FAIL","ISIS[process-id]reachedmaximumsequencenumber.
","6","IS-IS达到序列号最大值.
","LSP序列号更新到最大值.
","AuthTLV不止一个.
","ISIS/6/REC_RM_MEM_RESTORE","1.
正常运行信息,无需处理.
""REC_RM_MEM_RESTORE","AC_RT_SEL_FAIL","ISIS[process-id]receivedmemoryrestorationnotificationfromRM.
","6","IS-IS接收到RM发来的内存恢复通知.
","内存由shortage恢复到正常状态.
","AuthTLV不止一个.
","ISIS/4/REC_RM_MEM_SHORT","1.
正常运行信息,无需处理.
""REC_RM_MEM_SHORT","AC_RT_SEL_FAIL","ISIS[process-id]receivedmemoryshortagenotificationfromRM.
","4","IS-IS接收到RM发来的内存短缺通知.
","接收到RM发来的内存短缺通知.
","AuthTLV不止一个.
","ISIS/4/REDIST_THRESHOLD_REACH","1.
正常运行信息,无需处理.
""REDIST_THRESHOLD_REACH","AC_RT_SEL_FAIL","ISIS[process-id]Thenumberoflevel-[level]importedrouteshasreachedtheupperthresholdvalue.
(sysMTIndex=[USHORT],sysMaxLimit=[ULONG],sysUpperThresholdValue=[ULONG],sysLowerThresholdValue=[ULONG],sysTotalRedist=[ULONG])","4","IS-IS区域引入外部路由的数量达到告警阈值上限.
","[process-id]:IS-IS进程号.
[level]:IS-IS级别.
sysMTIndex:拓扑ID.
sysMaxLimit:允许引入路由数量的最大值.
sysUpperThresholdValue:告警阈值上限.
sysLowerThresholdValue:告警阈值下限.
sysTotalRedist:引入的路由数量.
","IS-IS区域引入外部路由的数量达到了设定的告警阈值上限.
","ISIS/4/REDIST_THRESHOLD_REACH_CLEAR","ISIS/4/IMPORT_LIMIT_RESTORE""REDIST_THRESHOLD_REACH_CLEAR","AC_RT_SEL_FAIL","ISIS[process-id]Thenumberoflevel-[level]importedrouteshasbeenlessthanthelowerthresholdvalue.
(sysMTIndex=[USHORT],sysMaxLimit=[ULONG],sysUpperThresholdValue=[ULONG],sysLowerThresholdValue=[ULONG],sysTotalRedist=[ULONG])","4","IS-IS区域引入外部路由的数量减少到告警阈值下限以下.
","IS-IS区域引入外部路由的数量超过阈值之后,又删除了部分引入路由使引入路由数减少到阈值下限以下.
","IS-IS区域引入外部路由的数量达到了设定的告警阈值上限.
","ISIS/6/RM_CIRC_CHANGE","1.

正常运行信息,无需处理.
""RM_CIRC_CHANGE","AC_RT_SEL_FAIL","ISIS[process-id]failedtosendthemessagethatthephysicalinterfacechanged.
","6","IS-IS发送物理接口变化消息失败.
","1.
如果此日志少量出现,等待一段时间后,如果恢复正常,则无需处理.
2.
如果此日志大量出现,请联系华为技术支持工程师.
","AuthTLV不止一个.
","1.
如果此日志少量出现,等待一段时间后,如果恢复正常,则无需处理.
2.
如果此日志大量出现,请联系华为技术支持工程师.
","ISIS/6/RM_CIRC_CHANGE_V6""RM_CIRC_CHANGE_V6","AC_RT_SEL_FAIL","ISIS[process-id]failedtosendthemessagethattheIPv6physicalinterfacechanged.
","6","IS-IS发送IPv6物理接口变化消息失败.
","ISIS/6/RM_LOGICRC_CHGE","AuthTLV不止一个.
","ISIS/6/RM_LOGICRC_CHGE","ISIS/6/RM_CIRC_CHANGE_V6""RM_LOGICRC_CHGE","AC_RT_SEL_FAIL","ISIS[process-id]failedtosendthemessagethatthelogicalinterfacechanged.
","6","IS-IS发送逻辑接口变化消息失败.
","发送逻辑接口变化消息失败.
","AuthTLV不止一个.
","ISIS/6/RM_LOGICRC_CHGE_V6","ISIS/6/RM_CIRC_CHANGE_V6""RM_LOGICRC_CHGE_V6","AC_RT_SEL_FAIL","ISIS[process-id]failedtosendthemessagethattheIPv6logicalinterfacechanged.
","6","IS-IS发送IPv6逻辑接口变化消息失败.
","发送IPv6逻辑接口变化消息失败.
","AuthTLV不止一个.
","ISIS/6/SELF_LSP_EXPIRED","FWD/4/SESSCTRLEND""SELF_LSP_EXPIRED","AC_RT_SEL_FAIL","ISIS[process-id]theLSPgeneratedbylocalsystemareexpired.
","6","IS-IS自己产生的LSP到期.
","LSP生存时间到期.
","AuthTLV不止一个.
","ISIS/6/ST_LK_CNTRL_FAIL","1.
正常运行信息,无需处理.
""ST_LK_CNTRL_FAIL","AC_RT_SEL_FAIL","ISIS[process-id]failedtosetlinkcontrol.
(InterfaceIndex=[STRING])","6","IS-IS设置链接控制失败.
","设置控制连接失败.
","对于协议字典处理失败.
","1.
检查接口连接状态.
","ISIS/4/START_DISABLE_ISIS""START_DISABLE_ISIS","AC_RT_SEL_FAIL","ISIS[process-id]disabledallISISmodules.
","4","IS-IS关闭所有IS-IS模块.
","配置undoisis命令去使能IS-IS.
","AuthTLV不止一个.
","ISIS/4/START_ENABLE_ISIS","1.
正常运行信息,无需处理.
""START_ENABLE_ISIS","AC_RT_SEL_FAIL","ISIS[process-id]enabledallISISmodules.
","4","IS-IS开启所有IS-IS模块.
","配置isis命令使能IS-IS.
","AuthTLV不止一个.
","ISIS/6/T1TMR_EXPIR_GR_CMD","1.
正常运行信息,无需处理.
""T1TMR_EXPIR_GR_CMD","AC_RT_SEL_FAIL","InISIS[process-id],level-[level]T1timerexpiredon[interface-name]duringISISGRandRRisset.
","6","在IS-ISGR过程中T1定时器在接口上终止,设置RR.
","[process-id]:IS-IS进程号.
[level]:IS-IS级别.
·1:level-1·2:level-2[interface-name]:接口名.
","GR过程中某个Level的T1定时器第1次超时.
","ISIS/6/T1TMR_LV1_CACEL_GR","1.
正常运行信息,无需处理.
""T1TMR_LV1_CACEL_GR","AC_RT_SEL_FAIL","ISIS[process-id]cancelledlevel-1T1timeron[interface-name]duringISISGR.
(Counter=[USHORT])","6","在IS-ISGR期间,Level-1T1定时器在接口上取消.
","[process-id]:IS-IS进程号.
[interface-name]:接口名.
Counter:计数器.
","GR过程中Level-1收到带RA位的IIH且收全CSNP.
","ISIS/6/T1TMR_LV1_EXPIR_GR","1.
正常运行信息,无需处理.
""T1TMR_LV1_EXPIR_GR","AC_RT_SEL_FAIL","InISIS[USHORT],level-1T1timerexpiredon[STRING]duringISISGR.
","6","IS-IS在GR过程中Level-1T1定时器终止.
","[USHORT]:进程号[STRING]:接口名称","ISIS/6/T1TMR_LV1_EXPIR_GR_C","[USHORT]:进程号[STRING]:接口名称","1.
正常运行信息,无需处理.
""T1TMR_LV1_EXPIR_GR_C","AC_RT_SEL_FAIL","InISIS[process-id],level-1T1timerexpiredon[interface-name]duringISISGR.
(Counter=[USHORT])","6","在IS-ISGR过程中Level-1T1定时器在接口上终止.
","GR过程中Level-1T1定时器第2次超时.
","GR过程中Level-1收到带RA位的IIH且收全CSNP.
","ISIS/5/T1TMR_LV1_STOP_CMD","1.
正常运行信息,无需处理.
""T1TMR_LV1_STOP_CMD","AC_RT_SEL_FAIL","ISIS[process-id]stoppedlevel-1T1timeron[interface-name]becauseofrestartdisable.
(Counter=[USHORT])","Whenbeingaskedwhethertocommitthecommand"undobulk-statenable",theuserchoseN.
","IS-IS中Level-1T1定时器由于去使能重启命令在接口上停止.
","取消重新启动时,确保相关Level-1T1定时器取消.
","GR过程中Level-1收到带RA位的IIH且收全CSNP.
","ISIS/6/T1TMR_LV2_CACEL_GR","1.
正常运行信息,无需处理.
""T1TMR_LV2_CACEL_GR","AC_RT_SEL_FAIL","ISIS[process-id]cancelledlevel-2T1timeron[interface-name]duringISISGR.
(Counter=[USHORT])","6","在IS-ISGR期间,Level-2T1定时器在接口上取消.
","GR过程中L2收到带RA位的IIH且收全CSNP.
","GR过程中Level-1收到带RA位的IIH且收全CSNP.
","ISIS/6/T1TMR_LV2_EXPIR_GR","1.

正常运行信息,无需处理.
""T1TMR_LV2_EXPIR_GR","AC_RT_SEL_FAIL","InISIS[USHORT],level-2T1timerexpiredon[STRING]duringISISGR.
","6","IS-IS在GR过程中Level-2T1定时器终止.
","ISIS在GR过程中Level-2T1定时器终止.
","ISIS/6/T1TMR_LV1_EXPIR_GR_C","ISIS/6/T1TMR_LV2_EXPIR_GR_C","1.
正常运行信息,无需处理.
""T1TMR_LV2_EXPIR_GR_C","AC_RT_SEL_FAIL","InISIS[process-id],level-2T1timerexpiredon[interface-name]duringISISGR.
(Counter=[USHORT])","6","在IS-ISGR过程中Level-2T1定时器在接口上终止.
","GR过程中Level–2T1定时器第2次超时.
","GR过程中Level-1收到带RA位的IIH且收全CSNP.
","ISIS/5/T1TMR_LV2_STOP_CMD","1.
正常运行信息,无需处理.
""T1TMR_LV2_STOP_CMD","AC_RT_SEL_FAIL","ISIS[process-id]stoppedlevel-2T1timeron[interface-name]becauseofrestartdisable.
(Counter=[USHORT])","Whenbeingaskedwhethertocommitthecommand"undobulk-statenable",theuserchoseN.
","IS-IS中Level-2T1定时器由于去使能重启命令在上停止.
","取消重新启动时,确保相关Level-2T1定时器取消.
","GR过程中Level-1收到带RA位的IIH且收全CSNP.
","ISIS/6/T2TMR_LV1_CANCL_GR","1.
正常运行信息,无需处理.
""T2TMR_LV1_CANCL_GR","AC_RT_SEL_FAIL","InISIS[process-id],level-1T2timercancelledduringISISGR.
","6","在IS-ISGR过程中Level-1T2定时器取消.
","GR过程中Level-1的LSDB同步完毕.
","AuthTLV不止一个.
","ISIS/6/T2TMR_LV1_EXPIR_GR","1.
正常运行信息,无需处理.
""T2TMR_LV1_EXPIR_GR","AC_RT_SEL_FAIL","InISIS[process-id],level-1T2timerexpiredduringISISGR.
","6","在IS-ISGR过程中Level-1T2定时器终止.
","GR过程中Level-1T2定时器超时.
","AuthTLV不止一个.
","ISIS/5/T2TMR_LV1_STOP_CMD","1.
正常运行信息,无需处理.
""T2TMR_LV1_STOP_CMD","AC_RT_SEL_FAIL","ISIS[process-id]stoppedlevel-1T2timerbecauseofrestartdisable.
","Whenbeingaskedwhethertocommitthecommand"undobulk-statenable",theuserchoseN.
","IS-IS中Level-1T2定时器由于去使能重启命令停止.
","取消重新启动时,确保相关Level-1T2定时器取消.
","AuthTLV不止一个.
","ISIS/6/T2TMR_LV2_CANCL_GR","1.
正常运行信息,无需处理.
""T2TMR_LV2_CANCL_GR","AC_RT_SEL_FAIL","InISIS[process-id],level-2T2timercancelledduringISISGR.
","6","在IS-ISGR过程中Level-2T2定时器取消.
","GR过程中Level-2的LSDB同步完毕,Level-2T2定时器被取消.
","AuthTLV不止一个.
","ISIS/6/T2TMR_LV2_EXPIR_GR","1.
正常运行信息,无需处理.
""T2TMR_LV2_EXPIR_GR","AC_RT_SEL_FAIL","InISIS[process-id],level-2T2timerexpiredduringISISGR.
","6","在IS-ISGR过程中Level-2T2定时器终止.
","GR过程中Level-2T2定时器超时.
","AuthTLV不止一个.
","ISIS/5/T2TMR_LV2_STOP_CMD","1.
正常运行信息,无需处理.
""T2TMR_LV2_STOP_CMD","AC_RT_SEL_FAIL","ISIS[process-id]stoppedlevel-2T2timerbecauseofrestartdisable.
","Whenbeingaskedwhethertocommitthecommand"undobulk-statenable",theuserchoseN.
","IS-IS中Level-2T2定时器由于去使能重启命令停止.
","取消重新启动时,确保相关Level-2T2定时器取消.
","AuthTLV不止一个.
","ISIS/6/T2TMR_STAR_L1_GR","1.
正常运行信息,无需处理.
""T2TMR_STAR_L1_GR","AC_RT_SEL_FAIL","T2timerstartedonlevel-1duringISIS[process-id]GR.
","6","在IS-ISGR中Level-1T2定时器启动.
","重新启动或主备倒换时,isisenble进入GR.
","AuthTLV不止一个.
","ISIS/6/T2TMR_STAR_L2_GR","1.
正常运行信息,无需处理.
""T2TMR_STAR_L2_GR","AC_RT_SEL_FAIL","T2timerstartedonlevel-2duringISIS[process-id]GR.
","6","在IS-ISGR中Level-2T2定时器启动.
","ISIS/6/T3TMR_CANCL_GR","AuthTLV不止一个.
","ISIS/6/T2TMR_STAR_L2_GR","1.
正常运行信息,无需处理.
""T3TMR_CANCL_GR","AC_RT_SEL_FAIL","InISIS[process-id],T3timercancelledduringISISGR.
","6","在IS-ISGR过程中T3定时器取消.
","GR过程中T3定时器被取消.
","AuthTLV不止一个.
","ISIS/6/T3TMR_EXPIR_GR","1.
正常运行信息,无需处理.
""T3TMR_EXPIR_GR","AC_RT_SEL_FAIL","InISIS[process-id],T3timerexpiredduringISISGR.
","6","在IS-ISGR过程中T3定时器终止.
","IS-IS在规定时间没完成GR,T3定时器超时.
","AuthTLV不止一个.
","ISIS/6/T3TMR_REINT_GR","1.
正常运行信息,无需处理.
""T3TMR_REINT_GR","AC_RT_SEL_FAIL","InISIS[process-id],T3timerre-initializedto[time]secondson[interface-name]duringISISGRwhenreceivedHellopackage.
","6","在IS-ISGR过程中,在链路上收到Hello报文后T3定时器重新初始化.
","[process-id]:IS-IS进程号.
[time]:时间.
[interface-name]:接口名.
","GR过程中收到restartTLV中带RA位的IIH.
","ISIS/6/T3TMR_STAR_GR","1.
正常运行信息,无需处理.
""T3TMR_STAR_GR","AC_RT_SEL_FAIL","T3timerstartedduringISIS[process-id]GR.
","6","在IS-ISGR中T3定时器启动.
","重新启动或主备倒换时,使能ISIS进入GR.
","AuthTLV不止一个.
","ISIS/5/T3TMR_STOP_CMD","1.
正常运行信息,无需处理.
""T3TMR_STOP_CMD","AC_RT_SEL_FAIL","ISIS[process-id]stoppedT3timerbecauseofrestartdisable.
","Whenbeingaskedwhethertocommitthecommand"undobulk-statenable",theuserchoseN.
","IS-IS中T3定时器由于去使能重启命令停止.
","取消重新启动时,确保相关T3定时器取消.
","AuthTLV不止一个.
","ISIS/6/TMER_STIL_USED","1.
正常运行信息,无需处理.
""TMER_STIL_USED","AC_RT_SEL_FAIL","Thetimerisinuse.
(TimerType=[ULONG],UsageCount=[ULONG],IsisProcessId=[USHORT])","6","计时器正在被使用.
","TimerType:计时器类型.
UsageCount:计数数量.
IsisProcessId:IS-IS进程号.
","内部说明.
","ISIS/6/TORM_LEV_GR_DESTR","1.
正常运行信息,无需处理.
""TORM_LEV_GR_DESTR","AC_RT_SEL_FAIL","ISIS[USHORT]notifiesRMthattheprocessisleavingrestartbecauseprocesswasdestroyed.
","6","因为进程状态被破坏,IS-IS通知RM进程即将退出重启状态.
","[USHORT]:IS-IS进程号","ISIS/6/TORM_LEV_RESTA_SMOH","[USHORT]:IS-IS进程号","1.
正常运行信息,无需处理.
""TORM_LEV_RESTA_SMOH","AC_RT_SEL_FAIL","ISIS[process-id]notifiesRMthattheprocessisleavingrestartinconsistencysmooth.
","6","在一致性平滑过程中,IS-IS通知RM系统即将离开重启状态.
","HA平滑过程中,IS-IS没配置GR.
","AuthTLV不止一个.
","ISIS/5/TORM_LEV_RESTAR_CMD","1.
正常运行信息,无需处理.
""TORM_LEV_RESTAR_CMD","AC_RT_SEL_FAIL","ISIS[process-id]notifiesRMthattheprocessisleavingrestartbecauseofrestartdisable.
","Whenbeingaskedwhethertocommitthecommand"undobulk-statenable",theuserchoseN.
","由于取消重启命令,IS-IS通知RM系统即将离开重启状态.
","取消重新启动.
","AuthTLV不止一个.
","ISIS/5/TORM_LEV_RESTAR_SPF","1.
正常运行信息,无需处理.
""TORM_LEV_RESTAR_SPF","AC_RT_SEL_FAIL","ISIS[process-id]notifiesRMthattheprocessisleavingrestartafterSPFisrun.
","Whenbeingaskedwhethertocommitthecommand"undobulk-statenable",theuserchoseN.
","SPF算法运行后,IS-IS通知RM系统离开重启状态.
","IS-IS重新启动过程结束,ISPF计算完毕,通知RM离开GR.
","AuthTLV不止一个.
","ISIS/5/TORM_RNTR_RESTAR_CMD","1.
正常运行信息,无需处理.
""TORM_RNTR_RESTAR_CMD","AC_RT_SEL_FAIL","ISIS[process-id]notifiesRMthattheprocessisenteringrestartbecauseofrestartenable.
","Whenbeingaskedwhethertocommitthecommand"undobulk-statenable",theuserchoseN.
","由于使能重启命令,IS-IS通知RM系统即将进入重启状态.
","ISIS/6/UNBIND_SOKT_FAIL","AuthTLV不止一个.
","ISIS/6/T2TMR_STAR_L2_GR","1.
正常运行信息,无需处理.
""UNBIND_SOKT_FAIL","AC_RT_SEL_FAIL","ISIS[process-id]failedtounbindsocketforthecircuit[interface-name].
(InterfaceIndex=[STRING],ReturnValue=[LONG])","6","IS-IS为接口释放socket失败.
","释放socket失败.
","绑定socket失败.
","KEYCHAIN/4/KEYCH_ALGID_CNFLCT","ISIS/5/CIRC_STATE_SET""KEYCHAIN","KEYCH_ALGID_CNFLCT","Inkeychain[keychain-name],theTCPalgorithmIDof[algorithm-name1]conflictswiththeTCPalgorithmIDof[algorithm-name2].
","4","在keychain中,TCP算法的算法id与另一个TCP算法的算法id发生冲突.
","keychain-name:Keychain的名称.
algorithm-name1:算法名称.
algorithm-name2:算法名称.
","同一个Keychain中,TCP算法ID冲突.
","1.
更改其中一个TCP算法ID,使TCP算法ID在一个Keychain中保持唯一.
","KEYCHAIN/6/KEYCH_ISSU_LOSLES""KEYCH_ISSU_LOSLES","KEYCH_ALGID_CNFLCT","Keychainmoduleupgradeislossless.
","6","Keychain模块的升级是无损的.
","ISSU升级时,ISSU比较各功能模块的规格.
","无:无","KEYCHAIN/6/KEYCH_ISSU_LSY","1.
正常运行信息,无需处理.
""KEYCH_ISSU_LSY","KEYCH_ALGID_CNFLCT","Keychainmoduleupgradeislossy.
","6","Keychain模块的升级是有损的.
","KEYCHAIN/6/KEYCH_KEY_DEFAULT_A","无:无","KEYCHAIN/6/KEYCH_ISSU_LSY","1.
正常运行信息,无需处理.
""KEYCH_KEY_DEFAULT_A","KEYCH_ALGID_CNFLCT","Inkeychain[keychain-name],thestatusofdefaultsendkey-id[key-id]ischangedtosendactive.
","6","在keychain中,默认发送Key-id的状态被更改为发送激活.
","keychain-name:Keychain的名称key-id:Key-id","1.
活跃的Key-id变为不活跃,缺省sendkey-id变为活跃状态.
2.
其他的Key-id不活跃时,配置了缺省sendkey-id的密码认证字.
3.
Key-id配置了密码认证字,但是没有活跃的Key-id.
","KEYCHAIN/6/KEYCH_KEY_DEFAULT_I","1.
正常运行信息,无需处理.
""KEYCH_KEY_DEFAULT_I","KEYCH_ALGID_CNFLCT","Inkeychain[keychain-name],thestatusofdefaultsendkey-id[key-id]ischangedtosendinactive.
","6","在keychain中,默认发送key-id的状态被更改为发送不激活.
","1.
缺省Sendkey-id在活跃时间内没有配置.
2.
缺省Sendkey-id的密码认证字在活跃时间内没有配置.
3.
缺省Sendkey-id对应的Key-id在活跃时间内没有配置.
","1.
活跃的Key-id变为不活跃,缺省sendkey-id变为活跃状态.
2.
其他的Key-id不活跃时,配置了缺省sendkey-id的密码认证字.
3.
Key-id配置了密码认证字,但是没有活跃的Key-id.
","KEYCHAIN/6/KEYCH_KEY_STATUS_AA","1.
正常运行信息,无需处理.
""KEYCH_KEY_STATUS_AA","KEYCH_ALGID_CNFLCT","Keychain[keychain-name]key-id[key-id]infoischanged,thesendstatusisactive,andthereceivestatusisactive.
","6","Keychain的Key-id信息改变,发送状态是活跃的,接收状态是活跃的.
","更改配置,使key-id的发送和接收状态都变成活跃.
","1.
活跃的Key-id变为不活跃,缺省sendkey-id变为活跃状态.
2.
其他的Key-id不活跃时,配置了缺省sendkey-id的密码认证字.
3.
Key-id配置了密码认证字,但是没有活跃的Key-id.
","KEYCHAIN/6/KEYCH_KEY_STATUS_AI","1.
正常运行信息,无需处理.
""KEYCH_KEY_STATUS_AI","KEYCH_ALGID_CNFLCT","Keychain[keychain-name]key-id[key-id]infoischanged,thesendstatusisactive,andthereceivestatusisinactive.
","6","Keychain的Key-id信息改变,发送状态是活跃的,接收状态是不活跃的.
","更改配置,使key-id的发送状态为活跃,接收状态都变成不活跃.
","1.
活跃的Key-id变为不活跃,缺省sendkey-id变为活跃状态.
2.
其他的Key-id不活跃时,配置了缺省sendkey-id的密码认证字.
3.
Key-id配置了密码认证字,但是没有活跃的Key-id.
","KEYCHAIN/6/KEYCH_KEY_STATUS_IA","1.
正常运行信息,无需处理.
""KEYCH_KEY_STATUS_IA","KEYCH_ALGID_CNFLCT","Keychain[keychain-name]key-id[key-id]infoischanged,thesendstatusisinactive,andthereceivestatusisactive.
","6","Keychain的Key-id信息改变,发送状态是不活跃的,接收状态是活跃的.
","更改配置,使key-id的发送状态为不活跃,接收状态都变成活跃.
","1.
活跃的Key-id变为不活跃,缺省sendkey-id变为活跃状态.
2.
其他的Key-id不活跃时,配置了缺省sendkey-id的密码认证字.
3.
Key-id配置了密码认证字,但是没有活跃的Key-id.
","KEYCHAIN/6/KEYCH_KEYID_RECV_A","1.
正常运行信息,无需处理.
""KEYCH_KEYID_RECV_A","KEYCH_ALGID_CNFLCT","Keychain[keychain-name]key-id[key-id]becamereceiveactive.
","6","Keychain[keychain-name]的Key-id[key-id]变成接收类型可用.
","更改时钟,或者Key-id的接收时间开始生效.
","1.
活跃的Key-id变为不活跃,缺省sendkey-id变为活跃状态.
2.
其他的Key-id不活跃时,配置了缺省sendkey-id的密码认证字.
3.
Key-id配置了密码认证字,但是没有活跃的Key-id.
","KEYCHAIN/6/KEYCH_KEYID_RECV_I","1.
正常运行信息,无需处理.
""KEYCH_KEYID_RECV_I","KEYCH_ALGID_CNFLCT","Keychain[keychain-name]key-id[key-id]becamereceiveinactive.
","6","Keychain的Key-id变为接收类型不可用.
","更改时钟,或者key-id的接收时间到期.
","1.
活跃的Key-id变为不活跃,缺省sendkey-id变为活跃状态.
2.
其他的Key-id不活跃时,配置了缺省sendkey-id的密码认证字.
3.
Key-id配置了密码认证字,但是没有活跃的Key-id.
","KEYCHAIN/6/KEYCH_KEYID_SEND_A","1.
正常运行信息,无需处理.
""KEYCH_KEYID_SEND_A","KEYCH_ALGID_CNFLCT","Keychain[keychain-name]key-id[key-id]becamesendactive.
","6","Keychain的Key-id变成发送类型可用.
","keychain-name:keychain的名称key-id:Key-id","更改时间,或者key-id的发送时间变成活跃.
","KEYCHAIN/6/KEYCH_NO_SEND_KEYID","1.
正常运行信息,无需处理.
""KEYCH_NO_SEND_KEYID","KEYCH_ALGID_CNFLCT","Keychain[keychain-name]hasnoactivesendkey.
","6","Keychain没有活跃的发送Key-id.
","keychain-name:Keychain的名称","更改时间,或者key-id没有活跃的发送时间.
","1.
如果规划在该时间段没有活跃的发送时间,则是正常运行信息,无需处理.
2.
如果规划在该时间端有活跃的发送时间,请配置该时间段活跃的发送时间.
","L2IF/6/FULLRULE""L2IF","FULLRULE","Newentriescannottakeeffectwhenthenumberoftheactivemac-limitentrieshasreachedtheupperlimit.
","6","MAC限制表项已经达到最大值的定位信息.
","MAC限制表项已经达到最大值.
","无:无","1.
请确认MAC地址学习规则配置情况:1.
在当前接口视图或VLAN视图下执行命令undomac-limit,删除无用的MAC地址限制规则.
2.
在当前接口或VLAN视图下执行命令mac-limit{maximummax|action{discard|forward}}*,基于以太网接口或VLAN添加新的MAC地址限制规则.
","L2IF/5/MACUSAGE_LOGRECORD""MACUSAGE_LOGRECORD","FULLRULE","MACaddressusagereachedtheupperlimit.
(SlotId=[ULONG],ConfiguredThreshold=[ULONG],CurrentMACUsage=[ULONG]).
","Whenbeingaskedwhethertocommitthecommand"undobulk-statenable",theuserchoseN.
","MAC地址使用率超过了配置的阈值.
","SlotId:槽位号.
ConfiguredThreshold:配置的MAC使用阈值.
CurrentMACUsage:当前MAC使用率.
","MAC地址使用率超过配置的阈值.
","1.
请任意执行以下一条命令:·请在系统视图下执行命令undomac-address删除无用的静态MAC地址表项.
·在满足应用要求的前提下,请在接口视图执行命令mac-limit重新配置当前接口或VLAN上最多可以学习的MAC数量.
配置成功后,查看告警是否恢复.
·Y=>4·N=>32.
请收集告警信息、日志信息和配置信息,并联系华为技术支持工程师.
3.
结束.
","L2IF/6/PORT_DOWN""PORT_DOWN","FULLRULE","Thestatusofport[port-name]turnsDOWN.
","6","将接口[port-name]的状态切换成Down.
","[port-name]:二层端口名称.
","二层接口状态切换.
","L2IF/6/PORT_UP","1.
正常运行信息,无需处理.
""PORT_UP","FULLRULE","Thestatusofport[port-name]turnsUP.
","6","将接口[port-name]的状态切换成Up.
","L2IF/6/ROUTER_TO_SWITCH","二层接口状态切换.
","L2IF/6/PORT_UP","1.

正常运行信息,无需处理.
""ROUTER_TO_SWITCH","FULLRULE","Starttoswitchport[port-name]fromL3modetoL2mode.
","6","将三层口[port-name]转换到二层口.
","[port-name]:接口名.
","接口从三层口转换为二层口.
","L2IF/6/SLA_RCV_INDEX_BY_BAT","1.
正常运行信息,无需处理.
""SLA_RCV_INDEX_BY_BAT","FULLRULE","TheslavecontrolboardobtainstheL2portindexfromthemaincontrolboardthroughbatchbackup.
Theportnameis[port-name].
","6","备板通过批量备份从主板获取二层接口[port-name]的索引.
","备板使用主板批量备份的索引分配二层索引.
","二层接口状态切换.
","L2IF/6/SLA_RCV_PORTINDEX","1.

正常运行信息,无需处理.
""SLA_RCV_PORTINDEX","FULLRULE","TheslavecontrolboardobtainstheL2portindexfromthemaincontrolboardthroughrealtimebackup.
Theportnameis[port-name].
","6","备板通过实时备份从主板获取二层接口[port-name]的索引.
","备板备份二层接口索引.
","二层接口状态切换.
","L2IF/6/SWITCH_TO_ROUTER","1.

正常运行信息,无需处理.
""SWITCH_TO_ROUTER","FULLRULE","Starttoswitchport[port-name]fromL2modetoL3mode.
","6","将二层口[port-name]转换到三层口.
","接口从二层口切换为三层口.
","二层接口状态切换.
","LACP/3/LAG_DOWN_REASON_EVENT","1.

正常运行信息,无需处理.
""LACP","LAG_DOWN_REASON_EVENT","ThememberoftheLACPmodeEth-Trunkinterfacewentdown.
(TrunkName=[STRING],PortName=[STRING],Reason=[STRING])","3","静态LACP模式的Eth-Trunk的成员口状态变为Down.
","TrunkName:静态LACP模式的Eth-Trunk接口名称.
PortName:静态LACP模式的Eth-Trunk接口的成员口名称.
Reason:静态LACP模式的Eth-Trunk接口的成员口状态变为Down的原因.
","因本端的操作或外部事件导致静态LACP模式的Eth-Trunk的成员口状态变为Down.
","1.

根据日志信息中Reason信息排查静态LACP模式的Eth-Trunk的成员口状态变为Down的原因.
","LACP/3/LAG_DOWN_REASON_PDU""LAG_DOWN_REASON_PDU","LAG_DOWN_REASON_EVENT","ThememberoftheLACPmodeEth-TrunkinterfacewentdownbecausethelocaldevicereceivedchangedLACPPDUfrompartner.
(TrunkName=[STRING],PortName=[STRING],Reason=[STRING],OldParam=[STRING],NewParam=[STRING])","3","因对端发送的LACP协议报文发生了变化,导致静态LACP模式的Eth-Trunk的成员口状态变为Down.
","TrunkName:静态LACP模式的Eth-Trunk接口名称.
PortName:静态LACP模式的Eth-Trunk接口的成员口名称.
Reason:静态LACP模式的Eth-Trunk接口的成员口状态变为Down的原因.
OldParam:原始参数.
NewParam:新参数.
","对端发送的LACP协议报文发生了变化.
","1.
根据日志信息中Reason信息排查对端发送的LACP协议报文发生了变化的原因.
","LACP/3/LAG_DOWN_REASON_SYS""LAG_DOWN_REASON_SYS","LAG_DOWN_REASON_EVENT","MembersoftheLACPmodeEth-Trunkinterfacewentdown.
(TrunkName=[STRING],Reason=[STRING])","3","TrunkName:静态LACP模式的Eth-Trunk接口名称.
Reason:静态LACP模式的Eth-Trunk接口的成员口状态变为Down的原因.
","TrunkName:静态LACP模式的Eth-Trunk接口名称.
PortName:静态LACP模式的Eth-Trunk接口的成员口名称.
Reason:静态LACP模式的Eth-Trunk接口的成员口状态变为Down的原因.
","LACP/3/OPTICAL_FIBER_MISCONNECT","1.
根据日志信息中Reason信息排查静态LACP模式的Eth-Trunk的成员口状态变为Down的原因.
","LACP/3/LAG_DOWN_REASON_PDU""OPTICAL_FIBER_MISCONNECT","LAG_DOWN_REASON_EVENT","ThememberoftheLACPmodeEth-TrunkinterfacereceivedanabnormalLACPDU,whichmaybecausedbyopticalfibermisconnection.
(TrunkName=[STRING],PortName=[STRING],LocalParam=[STRING],PDUParam=[STRING])","3","静态LACP模式的Eth-Trunk成员口收到了异常报文,可能是光纤错连引起.
","TrunkName:收到了异常报文的静态LACP模式的Eth-Trunk名称.
PortName:收到了异常报文的静态LACP模式的Eth-Trunk成员口名称.
LocalParam:本端保存的参数.
PDUParam:通过LACP协议报文收到的本端参数.
","光纤错连或接受报文异常等.
","1.
根据日志信息中LocalParam和PDUParam检查静态LACP模式的Eth-Trunk成员口光纤是否错连.
·错连=>2.
·没有错连=>3.
2.
正确连接Eth-Trunk成员口光纤.
3.
请收集日志信息和配置信息,并联系华为技术支持工程师.
","LINE/4/AUTHORITY_CHANGE""LINE","AUTHORITY_CHANGE","Theauthenticationmodewaschangedtopasswordauthenticationandtheuserlevelwaschangedto15on[user-interface]atthefirstuserlogin.
(IpAddress=[IpAddress]).
","4","首次登录时,用户界面上的认证模式变为密码认证,用户等级变为15级.
","user-interface:用户界面类型和编号.
IpAddress:用户IP地址.
","首次登录时,用户被要求配置用户界面属性,用户界面上的用户权限等属性更改时,记录日志.
","LINE/3/AUTO_EXEC","1.
正常运行信息,无需处理.
""AUTO_EXEC","AUTHORITY_CHANGE","Theuserchose[STRING]whendecidingwhethertoautomaticallyexecutethecommand.
","3","执行命令前用户确认是否自动执行命令.
","[STRING]:用户选择的操作类型.
·Y:是.
·N:否.
","LINE/3/CLR_ONELINE","CFM/5/FILE_NOTEXIST","1.
正常运行信息,无需处理.
""CLR_ONELINE","AUTHORITY_CHANGE","Theuserchose[STRING]whendecidingwhethertodisconnectthespecifieduserinterface.
","3","执行命令前用户确认是否断开指定用户界面的连接.
","LINE/4/CONNECT_FAIL","LINE/3/CLR_ONELINE","CFM/5/FILE_NOTEXIST","1.

正常运行信息,无需处理.
""Failedtoconnect.
(Ip=[Ip-address],VpnName=[VpnName],Reason=[Reason])","AUTHORITY_CHANGE","CONNECT_FAIL","4","用户登录设备失败.
","Ip:用户IP地址VpnName:VPN实例的名称Reason:用户登录失败原因","用户通过Console、Telnet、SSH等方式登录设备失败,记录该日志.
","LINE/5/LOCK","1.
正常运行信息,无需处理.
""LOCK","AUTHORITY_CHANGE","Succeedinlockingtheuser-interface[user-interface].
(IpAddress=[IpAddress],VpnName=[VpnName],User=[User])","Whenbeingaskedwhethertocommitthecommand"undobulk-statenable",theuserchoseN.
","成功锁定当前用户界面.
","user-interface:用户界面类型和编号.
IPAddress:用户IP地址.
当设备无法获取IP地址时,使用"**"记录.
例如通过Console口或Aux口登录用户的场景.
VpnName:VPN实例的名称.
User:用户名称.
当设备无法获取用户名时,使用"**"记录.
例如通过密码认证登录用户的场景.
","用户成功锁定当前用户界面.
","LINE/4/LOGIN_FAIL","1.
正常运行信息,无需处理.
""LOGIN_FAIL","AUTHORITY_CHANGE","Failedtologin.
(Ip=[Ip],VpnName=[VpnName],Reason=[Reason])","4","Ip:用户IP地址.
VpnName:VPN实例的名称.
Reason:登录失败的原因:·Thenumberofusersthatlogintotheserverthroughthechannelreachestheupperlimit.
·Thechannelconfigurationisincorrect.
","user-name:用户名.
ip-address:IP地址.
user-id:用户ID.
","用户尝试Telnet登录设备,由于通道被占满或配置错误导致登录失败,记录日志.
","LINE/3/NO_EXEC","1.
正常运行信息,无需处理.
""NO_EXEC","AUTHORITY_CHANGE","Theuserchose[STRING]whendecidingwhethertocancelthecurrentconfiguration.
","3","执行命令前用户确认是否取消当前配置.
","LINE/3/SND_ALL","LINE/3/CLR_ONELINE","CFM/5/FILE_NOTEXIST","1.

正常运行信息,无需处理.
""SND_ALL","AUTHORITY_CHANGE","Theuserchose[STRING]whendecidingwhethertosendmessagestoalltheusers.
","3","执行命令前用户确认是否向所有用户发送消息.
","LINE/3/SND_ONE","LINE/3/CLR_ONELINE","CFM/5/FILE_NOTEXIST","1.

正常运行信息,无需处理.
""SND_ONE","AUTHORITY_CHANGE","Theuserchose[STRING]whendecidingwhethertosendmessagestothespecifieduser.
","3","执行命令前用户确认是否向指定用户发送消息.
","LINE/5/UNLOCK","LINE/3/CLR_ONELINE","CFM/5/FILE_NOTEXIST","1.

正常运行信息,无需处理.
""UNLOCK","AUTHORITY_CHANGE","Theuserunlockedtheuser-interface[user-interface]successfully.
(UserName=[UserName],IPAddress=[IPAddress],VpnName=[VpnName],TriedTimes=[TriedTimes])","Whenbeingaskedwhethertocommitthecommand"undobulk-statenable",theuserchoseN.
","用户解锁当前用户界面成功.
","user-interface:用户界面类型和编号.
UserName:用户名.
当设备无法获取用户名时,使用"**"记录.
例如通过密码认证登录用户的场景.
IPAddress:用户IP地址.
当设备无法获取IP地址时,使用"**"记录.
例如通过Console口或Aux口登录用户的场景.
VpnName:VPN实例的名称.
TriedTimes:输入密码的次数.
","用户使用lock命令锁住当前用户界面并设置锁定密码后,尝试输入密码解锁,解锁成功,记录该日志.
","LINE/4/UNLOCK_ERROR_FAIL","1.

正常运行信息,无需处理.
""UNLOCK_ERROR_FAIL","AUTHORITY_CHANGE","Failedtounlocktheuser-interface[user-interface].
(UserName=[UserName],IPAddress=[IPAddress],VpnName=[VpnName],Reason=[Reason])","4","用户解锁当前用户界面失败的原因.
","user-interface:用户界面类型和编号.
UserName:用户名称.
当设备无法获取用户名时,使用"**"记录.
例如通过密码认证登录用户的场景.
IPAddress:用户IP地址.
当设备无法获取IP地址时,使用"**"记录.
例如通过Console口或Aux口登录用户的场景.
VpnName:VPN实例的名称.
Reason:解锁当前用户界面失败的原因.
","用户锁住当前用户界面并设置锁定密码后,尝试输入密码解锁,密码匹配失败或者密码输入超时,记录该日志.
","LINE/4/UNLOCK_FAIL","1.

正常运行信息,无需处理.
""UNLOCK_FAIL","AUTHORITY_CHANGE","Theuserfailedtounlocktheuser-interface[user-interface].
(UserName=[UserName],IPAddress=[IPAddress],VpnName=[VpnName],FailedTimes=[FailedTimes])","4","用户解锁当前用户界面失败.
","user-interface:用户界面类型和编号.
UserName:用户名.
当设备无法获取用户名时,使用"**"记录.
例如通过密码认证登录用户的场景.
IPAddress:用户IP地址.
当设备无法获取IP地址时,使用"**"记录.
例如通过Console口或Aux口登录用户的场景.
VpnName:VPN实例的名称.
FailedTimes:输入错误密码的次数.
","用户使用lock命令锁住当前用户界面并设置锁定密码后,尝试输入密码解锁,密码匹配失败3次,记录该日志.
","LOCATION/3/UPDATEFAIL","1.

正常运行信息,无需处理.
""LOCATION","UPDATEFAIL","[cause],[suggestion].
(SyslogId=[syslog-id],Module=[module],Pre-UpdateVersion=[pre-updateversion],UpdateVersion=[update-version],Status=[status],Duration(s)=[duration])","3","地区识别特征库升级失败.
","cause:日志产生的原因,包括:·Failedtoinitializesignaturedatabase:初始化加载特征库失败·Failedtoupdatesignaturedatabase:升级特征库失败·Failedtorollbacksignaturedatabase:回退特征库失败suggestion:处理建议,包括:·thespecifiedfiledoesnotexist,pleasecheck:请检查指定文件是否存在·thecontentofspecifiedfileillegal,pleaseuselegalupdatefile:指定文件的内容非法,请使用有效的升级文件·noneedtoupdatetheversion:无需进行目标版本升级·pleaseensurethestoragecardhasenoughspaceforupdating:请确保CF卡有足够空间·pleasecontactcustomerservice:请联系技术服务人员syslog-id:日志序号.
module:模块名LOCATION-SDB,表示地区识别特征库.
pre-updateversion:升级前版本号.
update-version:升级后版本号.
status:升级方式,包括:·local-update:本地升级·rollback:版本回退·update-load:版本加载duration:升级过程所用的时间.
","请参见cause的参数含义.
","1.
按照suggestion给出的建议进行处理.
","LOCATION/5/UPDATESUCCESS""UPDATESUCCESS","UPDATEFAIL","[cause].
(SyslogId=[syslog-id],Module=[module],Pre-UpdateVersion=[pre-updateversion],UpdateVersion=[update-version],Status=[status],Duration(s)=[duration])","Whenbeingaskedwhethertocommitthecommand"undobulk-statenable",theuserchoseN.
","地区识别特征库升级成功.
","cause:日志产生的原因,包括:·Succeedininitializingsignaturedatabase:初始化加载特征库成功·Succeedinupdatingsignaturedatabase:升级特征库成功·Succeedinrollingbacksignaturedatabase:回退特征库成功syslog-id:日志序号.
module:模块名.
pre-updateversion:升级前版本号.
update-version:升级后版本号.
status:升级方式,包括:·init-load:初始化加载(即设备启动时加载特征库.
)·local-update:本地升级·online-update:在线升级·rollback:版本回退duration:升级过程所用的时间.
","LSPAGENT/1/MEM_SHORTAGE","1.
按照suggestion给出的建议进行处理.
","1.
正常运行信息,无需处理.
""LSPAGENT","MEM_SHORTAGE","ThemoduleAgentreceivememoryshortagemessage!
","Licenseexceedstheauthorizedperiodandthetrialperiod!
","Agent模块收到内存不足的消息.
","LSPAGENT/2/IPC_CRT_GROUP","无:无","LSPAGENT/2/IPC_CRT_GROUP","BGP/6/RECV_NOTIFY""IPC_CRT_GROUP","MEM_SHORTAGE","IPCfailedtocreatethesendinggroup!
","2","IPC创建发送组失败.
","IPC组资源耗尽.
","无:无","1.
请关注系统消息,查看系统是否已经处于异常状态.
比如板卡是否异常重启,CPU和内存资源是否使用率过高.
2.
此种情况可能为IPC组资源被过多申请,为非正常情况.
请联系技术支持工程师.
","LSPAGENT/3/MEM_IPC_MSG""MEM_IPC_MSG","MEM_SHORTAGE","IPCfailedtoallocatethememoryforsendingmessage!
","3","IPC为发送消息分配内存失败.
","原因1:申请的内存块太大,没有足够大的内存可以分配.
原因2:内存耗尽,没有可用的内存导致.
","无:无","LSPAGENT/5/LABEL_TYPE_ADD","BGP/6/RECV_NOTIFY""LABEL_TYPE_ADD","MEM_SHORTAGE","Labeloperationis[operation-type]whenaddingNHLFE.
","Whenbeingaskedwhethertocommitthecommand"undobulk-statenable",theuserchoseN.
","添加的标签操作类型.
","operation-type:标签操作类型.
具体情况如下:·PUSH:压入.
·SWAP:交换.
·POP:弹出.
","传送Tunnel信息.
","LSPAGENT/5/MEM_SHORT_FLAG","1.
正常运行信息,无需处理.
""MEM_SHORT_FLAG","MEM_SHORTAGE","ThemouduleAgentreceivesthemessageofresettingmemoryshortageflag.
","Whenbeingaskedwhethertocommitthecommand"undobulk-statenable",theuserchoseN.
","Agent模块清除内存不足标志.
","Agent模块由内存不足变为内存可用.
","无:无","LSPAGENT/6/QUEUE_EVT_NUM","1.
正常运行信息,无需处理.
""QUEUE_EVT_NUM","MEM_SHORTAGE","EventsinQueueexceededthemaxlimitofeventnumber.
","6","队列中的事件超过最大的限制数量.
","消息队列中的事件超过队列最大限制.
","无:无","LSPM/3/FAIL_CREATE_STALE_IF","BGP/6/RECV_NOTIFY""LSPM","FAIL_CREATE_STALE_IF","Cannotcreatethestaleinterface[interface-name]becausethestaleinterfacenumberreacheslimit.
","3","创建废弃接口失败.
","LSPM/3/FAIL_DELETE_STALE_IF","接口转变为不可用状态.
","LSPM/3/FAIL_DELETE_STALE_IF","1.

正常运行信息,无需处理.
""FAIL_DELETE_STALE_IF","FAIL_CREATE_STALE_IF","Failedtodeletethestaleinterface[interface-name].
","3","删除废弃接口失败.
","LSPM/6/GR_END_TIME","接口转变为不可用状态.
","LSPM/6/GR_END_TIME","1.

正常运行信息,无需处理.
""GR_END_TIME","FAIL_CREATE_STALE_IF","RSVPGRendedattime[time].
","6","RSVPGR结束的时间.
","[time]:结束时间.
","GR结束后,RSVP通知LSMGR结束.
LSPM记录收到RSVPGR结束消息的时间.
","LSPM/6/GR_START_TIME","1.
正常运行信息,无需处理.
""GR_START_TIME","FAIL_CREATE_STALE_IF","RSVPGRbeganattime[time].
","6","RSVPGR开始的时间.
","[time]:开始时间.
","GR开始后,RSVP通知LSMGR开始.
LSPM记录收到RSVPGR开始消息的时间.
","LSPM/3/GRAGINGFAIL","1.
正常运行信息,无需处理.
""GRAGINGFAIL","FAIL_CREATE_STALE_IF","AnerroroccurredwhentheagingofanRSVPLSPwasinprocess.
(ErrorCode=[ULONG],IngressLsrId=[IPADDR],SessionTunnelId=[ULONG],LcalLspId=[ULONG])","3","在老化过程中,LSPM删除没有更新的LSP失败","ErrorCode:错误码.
IngressLsrId:入节点的LSRID.
SessionTunnelId:隧道ID.
LcalLspId:本地LSPID.
","GR老化过程中,LSPM删除LSP失败或者通知Agent失败.
","1.
打开debuggingmplsmanagementgraceful-restartprocess调试开关,查看具体的错误原因.
2.
请联系华为技术支持工程师.
","LSPM/6/HASMOOTHBEGIN""HASMOOTHBEGIN","FAIL_CREATE_STALE_IF","LSPMstartedsmoothingattime[time].
(SmoothType=[ULONG])","6","显示LSPM平滑开始的时间.
","[time]:开始平滑的时间.
SmoothType:平滑的类型.
","主备倒换.
","LSPM/6/HASMOOTHEND","1.
正常运行信息,无需处理.
""HASMOOTHEND","FAIL_CREATE_STALE_IF","LSPMfinishedsmoothingattime[time].
(SmoothType=[ULONG])","6","LSPM平滑结束.
","[time]:结束平滑的时间.
SmoothType:平滑的类型.
","LSPM/3/HASMOOTHFAIL","LSPM/6/HASMOOTHEND","1.
正常运行信息,无需处理.
""HASMOOTHFAIL","FAIL_CREATE_STALE_IF","AnerroroccurredwhenLSPMwasprocessingsmoothing.
(ErrorCode=[ULONG1],IngressLsrId=[IPADDR],SessionTunnelId=[ULONG2],LocalLspId=[ULONG3],LspIndex=[ULONG4])","3","LSPM平滑失败.
有四种情况的平滑失败:0:未知错误.
1:平滑主LSP失败.
2:ModifyLSP平滑失败.
3:BackupLSP平滑失败","ErrorCode:平滑失败错误代码.
具体情况如下:0:未知错误.
1:平滑主LSP失败.
2:ModifyLSP平滑失败.
3:BackupLSP平滑失败.
IngressLsrId:隧道入接口的LSRID.
SessionTunnelId:隧道ID.
LocalLspId:LSPID.
LspIndex:LSP索引.
","主板备份错误或者备份失败.
","LSPM/3/LSPMTEST","LSPM/6/HASMOOTHBEGIN""LSPMTEST","FAIL_CREATE_STALE_IF","NotifyresourceinfotoRMfailed.
","3","通知资源信息给RM失败.
","可能因为lspm通知资源信息给RM的接口出错.
","无:无","1.
请检查与RM模块的接口.
2.
请联系华为技术支持工程师.
","LSPM/3/PROCESSTNLMSGFAILED""PROCESSTNLMSGFAILED","FAIL_CREATE_STALE_IF","CannotprocessHAtunnelmessage.
(TunnelName=[STRING],EventType=[ULONG])","3","处理HA隧道消息失败.
","TunnelName:隧道名称.
EventType:隧道事件类型.
","收到隧道接口模块传来的隧道事件消息失败.
","1.
打开debuggingmplsmanagementprocess调试开关,收集调试信息.
2.
请联系华为技术支持工程师.
","LSPM/6/RECEIVEGRENDEVENT""RECEIVEGRENDEVENT","FAIL_CREATE_STALE_IF","ReceiveGRendeventfromRM.
","6","从RM模块收到GR结束事件.
","LSPM/6/SENTBATCHBKUPOVERHA","无:无","LSPM/6/SENTBATCHBKUPOVERHA","1.
正常运行信息,无需处理.
""SENTBATCHBKUPOVERHA","FAIL_CREATE_STALE_IF","LSPMnotifiedHAbatchbackupfinished.
","6","LSPM通知HA批备份结束.
","备板插入后进行批备,批备结束后LSPM通知HA.
","无:无","LSPM/6/SENTSMOOTHFINISHHA","1.
正常运行信息,无需处理.
""SENTSMOOTHFINISHHA","FAIL_CREATE_STALE_IF","LSPMnotifiedHASMOOTHfinished.
","6","LSPM通知HA平滑结束.
","主备倒换后进行平滑,平滑结束后LSPM通知HA.
","无:无","LSPM/6/SLOTPLUGINOUTEVENT","1.
正常运行信息,无需处理.
""SLOTPLUGINOUTEVENT","FAIL_CREATE_STALE_IF","Receivedslotevent[event-id]fromslot[slot-id].
","6","接口板热拔插变化事件.
","[event-id]:接口板热插拔事件类型编号.
[slot-id]:接口板所在的插槽编号.
","收到接口板热拔插变化事件.
","LSPM/4/SWITCH_TO_PT_FAIL","1.
正常运行信息,无需处理.
""SWITCH_TO_PT_FAIL","FAIL_CREATE_STALE_IF","Cannotswitchtoprotectiontunnel,theprotectiontunnelisunavailable.
","4","不能向备隧道倒换,因为备隧道不可用.
","在处理倒换到备隧道的命令时,备隧道已经是不可用状态,此时不能倒换.
","无:无","1.
配置保护组,并倒换.
2.
检查备隧道的状态.
3.
请联系华为技术支持工程师.
","LSPM/4/SWITCH_TO_PTUNN""SWITCH_TO_PTUNN","FAIL_CREATE_STALE_IF","Switchtoprotectiontunnel.
(WorkTunnelis[Index])","4","从主隧道切换到保护隧道.
","[Index]:主隧道索引.
","切换到保护隧道.
","LSPM/4/SWITCH_TO_WT_FAIL","1.
正常运行信息,无需处理.
""SWITCH_TO_WT_FAIL","FAIL_CREATE_STALE_IF","Cannotswitchtoworktunnel,theworktunnelisunavailable.
","4","不能向主隧道倒换,因为主隧道不可用.
","在处理倒换到主隧道的命令时,主隧道已经是不可用状态,此时不能倒换.
","无:无","1.
配置保护组,并倒换.
2.
检查主隧道的状态.
3.
联系华为技术支持工程师.
","LSPM/4/SWITCH_TO_WTUNN""SWITCH_TO_WTUNN","FAIL_CREATE_STALE_IF","Switchtoworktunnel.
(WorkTunnelis[Index])","4","从保护隧道切换到主隧道.
","切换到主隧道.
","切换到保护隧道.
","LSPM/4/TRAPSUPPRESS","1.
正常运行信息,无需处理.
""TRAPSUPPRESS","FAIL_CREATE_STALE_IF","Inthelatest[value]seconds,thenumberoftimesthatthetrapof[feature-name]issuppressedis[times].
","4","提示在最近的一段时间内告警信息被抑制的次数.
","[value]:表示具体的时间长度,单位是秒.
[feature-name]:表示产生告警的特性名称.
[times]:表示告警信息被抑制的次数.
","正常记录日志信息.
","LSPM/3/TRIGGERRSVPFAIL","1.
正常运行信息,无需处理.
""TRIGGERRSVPFAIL","FAIL_CREATE_STALE_IF","FailedtotriggerRSVPduringGR.
(ErrorCode=[ULONG],SessionTunnelId=[ULONG],LocalLspId=[ULONG],LspIndex=[ULONG])","3","GR过程中触发RSVP失败.
有四种情况触发RSVP失败,0:未知错误.
1:找不到对应的LSP.
2:找不到对应的显式路径.
3:发送消息失败.
","ErrorCode:触发RSVP失败时的错误代码.
具体情况如下:0:未知错误.
1:找不到对应的LSP.
2:找不到对应的显式路径.
3:发送消息失败.
SessionTunnelId:Tunnel的SessionTunnelId.
LocalLspId:Tunnel中LSP的LocalLspId.
LspIndex:LSP的LSPIndex.
","LSPM/6/TWOLABELFORSAMEFEC","LSPM/3/LSPMTEST","LSPM/6/HASMOOTHBEGIN""TWOLABELFORSAMEFEC","FAIL_CREATE_STALE_IF","Founddifferentin-labelsforthesameFECinLDPGRprocess.
(NewLabel=[ULONG],OldLabel=[ULONG])","6","在LDPGR过程中,同一个FEC对应不同的标签值.
","NewLabel:第一个标签索引值.
OldLabel:第二个标签索引值.
","同一条FEC对应着多条不同的入标签.
","1.
检查LSPM模块数据,查询FEC对应的入标签信息.
","MAIL/4/SENDFAIL""MAIL","SENDFAIL","mail-send-result=[mail-send-result]details=[details]vsys=[vsys-name]","4","设备自身向邮件服务器发送邮件失败.
","mail-send-result:邮件发送结果,取值为fail.
details:邮件发送失败的原因,可能的取值如下:·userauthentificationfailed:认证失败·connectfailed(networkinvalidorconfigurationincorrect):连接建立失败·fillmailbodyfailed:邮件正文填充失败·transferfailed:邮件转发失败·unknownreasonfailed:未知错误vsys-name:虚拟系统名称.
","请参见details给的参数含义.
","1.
检查邮件服务器配置,包括服务器地址以及认证用户名和密码.
2.
检查设备与邮件服务器能否ping通.
","MANAGER/3/LOCK""MANAGER","Theuserwaslockedout.
(UserName=[user-name],LockTime=[lock-time],LockReason=[lock-reason],AccessType=[accesstype],IPAddress=[ip-address])","Succeedinlockingtheuser-interface[user-interface].
(IpAddress=[IpAddress],VpnName=[VpnName],User=[User])","3","管理员用户被锁定.
锁定期间,该管理员用户不能再登录.
","user-name:管理员用户登录名.
lock-time:锁定时长.
lock-reason:锁定原因.
参数值为:passwordincorrectfor3times(3次密码错误).
accesstype:接入类型.
ip-address:管理员IP地址.
","同一管理员用户连续登录失败次数超过3次.
导致登录失败的原因可能是密码输入错误.
","1.
管理员用户需等待锁定时间到期之后,重新登录.
","MANAGER/4/CURRENT_USER_MODIFY_PASSWORD""CURRENT_USER_MODIFY_PASSWORD","Theuserwaslockedout.
(UserName=[user-name],LockTime=[lock-time],LockReason=[lock-reason],AccessType=[accesstype],IPAddress=[ip-address])","Thecurrentuserfailedtochangethepassword.
(UserName=[user-name],Vsys=[vsys-name])","4","当前用户修改密码失败.
","user-name:管理员用户登录名.
","当前用户使用current-userpassword-modify命令修改自身密码.
","1.
请检查输入的初始密码是否正确,或者输入的新密码是否一致.
","MANAGER/4/UNLOCK""Theuserwasunlocked.
(UserName=[user-name])","Theuserwaslockedout.
(UserName=[user-name],LockTime=[lock-time],LockReason=[lock-reason],AccessType=[accesstype],IPAddress=[ip-address])","Theuserunlockedtheuser-interface[user-interface]successfully.
(UserName=[UserName],IPAddress=[IPAddress],VpnName=[VpnName],TriedTimes=[TriedTimes])","4","解除管理员用户锁定状态.
","user-name:管理员用户的登录名.
","管理员用户已被解除锁定.
","ND/4/ADDR_DUPLICATE","1.
正常运行信息,无需处理.
""ND","ADDR_DUPLICATE","Theaddress[Ipv6Addr]on[IfName]isduplicated.
","4","接口上的指定地址冲突检测未通过.
","[Ipv6Addr]:IPv6地址.
[IfName]:接口名称.
","接口上配置的IPv6地址已经被其他结点使用.
","1.
为该接口配置与其他结点不冲突的IPv6地址.
","ND/4/NDSEND_AUTH_FAILED""NDSEND_AUTH_FAILED","ADDR_DUPLICATE","NDoptioncheckfailed.
(PacketType=[STRING],CheckType=[STRING],Interface=[STRING],SourceAddress=[STRING],DestinationAddress=[STRING],SourceMacAddress=[STRING])","4","ND报文选项校验失败.
","PacketType:报文类型.
·NS报文.
·NA报文.
·RS报文.
·RA报文.
CheckType:校验类型.
·CGA选项校验.
·RSA选项校验.
Interface:接收到报文的接口名称.
SourceAddress:接收报文的源地址.
DestinationAddress:接收报文的目的地址.
SourceMacAddress:接收报文的源MAC地址.
","接口上使能了安全邻居发现功能,在对收到的报文进行CGA选项或者RSA选项检查时,发现报文不合法,校验失败记录日志.
","NE5KQOS/1/MIRRORCONFIGFAILED","1.

正常运行信息,无需处理.
""NE5KQOS","MIRRORCONFIGFAILED","Mirrorandnetstreamintheslot[slot-id]areconflicting.
","Licenseexceedstheauthorizedperiodandthetrialperiod!
","端口镜像功能和流量采样功能在接口板上发生冲突.
","同时配置了整板镜像和集中式流量采样.
","1.
联系华为工程师进行处理.
","1.
单板上不能同时配置整板镜像和集中式流量采样,出现该问题后,需要删除其中的一项功能.
","NE5KQOS/3/TRUNKCARRUNERR""TRUNKCARRUNERR","MIRRORCONFIGFAILED","Currentstate:sendtrunkcarfailed.
","3","发送TRUNK的CAR信息失败.
","原因1:主控板主备倒换处理出错.
原因2:热插拔处理出错.
","无:无","NE5KQOS/6/LPUNOTUP","HQOS/7/GQRSRELREQINVALID""LPUNOTUP","MIRRORCONFIGFAILED","RPCmessagehasbeensenttotheLPUwhichisnotup.
","6","RPC消息发送到了还未在位的接口板.
","NE5KQOS/6/SLAVENOTUP","无:无","NE5KQOS/6/SLAVENOTUP","1.
正常运行信息,无需处理.
""SLAVENOTUP","MIRRORCONFIGFAILED","RPCmessagehasbeensenttotheslaveboardwhichisnotup.
","6","RPC消息发送到了还未在位的备用主控板.
","NE5KQOS/6/TMRESUSEDUP","无:无","NE5KQOS/6/TMRESUSEDUP","1.
正常运行信息,无需处理.
""TMRESUSEDUP","MIRRORCONFIGFAILED","TMresourceisexhausted.
","6","TM资源耗尽.
","配置了超规格的复杂流分类.
","无:无","NE5KQOS/6/TRUNKCARRUNINFO","1.
正常运行信息,无需处理.
""TRUNKCARRUNINFO","MIRRORCONFIGFAILED","Currentstate:sendtrunkcarinformation.
","6","发送TRUNK的CAR信息成功.
","原因1:主控板主备倒换处理正常.
原因2:热插拔处理正常.
","无:无","NLOG/2/DISKFULL","1.
正常运行信息,无需处理.
""NLOG","DISKFULL","[log-type-name]logshavetakenup[percentage]%ofthereservedstoragespaceforthistypeoflogs.
(SyslogId=[syslog-id])","2","硬盘上的日志或报表已经达到该类日志或报表总空间的阈值.
","log-type-name:日志类型,包括:·traffic-origin:流量日志·threat-origin:威胁日志·url-origin:URL过滤日志·syslog-origin:系统日志·policy-origin:策略命中日志·traffic-merge:流量报表·threat-merge:威胁报表·policy-merge:策略命中报表percentage:告警阈值的百分比.
syslog-id:日志序列号.
","硬盘某种类型的日志或报表达到命令disklog-fullalert-threshold配置的硬盘日志存储空间告警阈值.
","1.
在Web界面中,将硬盘中的日志或报表导出到管理员PC中.
2.
执行命令disklog-full,配置当硬盘日志存储空间不足时,硬盘对新日志的处理方式.
","NLOG/2/PROCFAIL""PROCFAIL","DISKFULL","Failedtostartthe[process]process.
","2","进程启动失败.
","process:进程名称.
","1.
过几分钟重新启动进程.
","内存不足.
","NLOG/4/NLGPDFFAL""NLGPDFFAL","DISKFULL","FailedtocreateaPDFfile.
(reporttype:[type-name],failedreason:[reason]).
","4","报表定制时创建PDF文件失败.
","reason:报表定制时创建PDF文件失败的原因.
包含如下原因类型:·queryreportdatafail:报表数据库查询失败·reportdataconversionfail:报表数据转换失败·applymemoryfail:申请内存失败·writedatatoPDFfilefail:报表数据写入到PDF文件失败","见里的原因描述.
","1.
报表数据库查询失败,可能是查询超时,稍后重试看是否可以解决.
2.
报表数据转换失败,请收集告警和错误信息,联系华为技术支持处理.
3.
关注内存使用情况,降低内存使用量,稍后重试看是否可以解决.
4.
报表数据写入到PDF文件失败,请收集告警和错误信息,联系技术支持处理.
","NLOG/4/NLGUPFAL""NLGUPFAL","DISKFULL","Thelocallogsystemupdatefailed.
(failedreason:[reason])","4","日志系统升级失败.
","reason:日志系统升级失败的原因.
包含如下原因类型:·Unknownerror:未知的错误·Memorynotenough:内存不足·Fileerror:文件操作出错·Logthreadexception:日志升级进程出现异常","从历史版本升级到版本后出现日志系统升级失败的可能原因见上述参数含义解释.
","1.
如果原因类型为未知的错误、文件操作出错、日志升级进程出现异常,请收集告警信息、日志信息和配置信息,联系华为工程师进行处理.
2.
如果原因类型为内存不足,请关注设备内存的使用情况,降低内存使用后再重新升级下看是否成功.
","NLOG/4/NLGUPT""NLGUPT","DISKFULL","Thelocallogsystemisnotup-to-date.
Pleaseupdateitassoonaspossible.
Otherwise,historicallogscannotbequeried.
(logUpdateVer=[STRING]).
","4","老日志系统未升级提醒.
","logUpdateVer:当前数据库版本名称.
","从老的版本升级后,用户没有手动将数据库版本升级到最新版本,将可能无法查询旧系统中的日志报表.
","1.
使用命令行updatelogdatabase后将数据库升级到最新.
","NLOG/6/NLOGINIT""NLOGINIT","DISKFULL","Logsysteminitializationsuccessed.
(SyslogId=[syslog-id].
)","6","日志系统初始化成功.
","syslog-id:日志序列号.
","日志系统初始化完成.
","1.
正常运行信息,无需处理.
","NLOG/6/RESETDISK""RESETDISK","DISKFULL","Succeededinclearingthediskspace.
spacetype:[space-type]","6","清空日志空间成功.
","space-type:空间类型.
","管理员清空日志硬盘空间成功.
","NLOG/4/RESETDISKFAIL","NLOG/6/RESETDISK""RESETDISKFAIL","DISKFULL","Failedtoclearthelogstoragespace.
SpaceType:[space-type]FailureCauses:[failure-causes]","4","清空日志空间失败.
","space-type:空间类型.
failurecauses:失败原因.
","管理员清空日志硬盘空间失败.
","1.
稍后再进行清空.
","NLOG/6/NLGSOK""NLGSOK","DISKFULL","Scheduledlogsendingsuccessed.
(SendTime:[send-time])","6","流量日志、会话日志和URL审计日志缓存定时发送成功.
","send-time:缓存定时发送成功这条日志产生的时间.
","无.
","NLOG/6/NLGUPDT","1.
正常运行信息,无需处理.
""NLGUPDT","DISKFULL","Thelocallogsystemwasupgraded.
(SyslogId=[ULONG1],LogUpdateVer=[ULONG2],LogRunVer=[ULONG3],LogUpdateFun=[STRING1],LogUpdateTbl=[STRING2])","6","本地日志系统升级.
","SyslogId:日志序号.
LogUpdateVer:日志系统更新版本号.
LogRunVer:日志系统当前运行版本号.
LogUpdateFun:日志系统更新函数名称.
LogUpdateTbl:日志系统更新表名称.
","NLOG/6/RECYLEID","SyslogId:日志序号.
LogUpdateVer:日志系统更新版本号.
LogRunVer:日志系统当前运行版本号.
LogUpdateFun:日志系统更新函数名称.
LogUpdateTbl:日志系统更新表名称.
","NLOG/6/RESETDISK""RECYLEID","DISKFULL","SucceededinreclaimingtheIDtable.
(Idtable:[STRING].
)","6","回收ID表成功.
","Idtable:表名称.
","NTP/4/GRADUAL_SET_TIME","Idtable:表名称.
","NLOG/6/RESETDISK""NTP","GRADUAL_SET_TIME","Failedtosetsystemtimeadjustmentintheprocessofgradualadjustment.
","4","逐步调整过程中,设定系统时间失败.
","NTP/4/LEAP_CHANGE","无:无","NTP/4/LEAP_CHANGE","1.
正常运行信息,无需处理.
""LEAP_CHANGE","GRADUAL_SET_TIME","Systemleapchangesfrom[leap1]to[leap2]afterclockupdate.
","4","时钟更新后,系统跳秒改变.
","[leap1]:系统的跳秒.
[leap2]:系统的跳秒.
","原因1:当系统刚开始选择到时钟源.
原因2:同步过程中发生同步时钟源切换时.
","NTP/4/PEER_MAX_ASSOC","1.
正常运行信息,无需处理.
""PEER_MAX_ASSOC","GRADUAL_SET_TIME","Thenumberofpeersexceededtheupperlimit128.
(CurrentPeerNumber=[string])","4","当前的会话数量达到上限CurrentPeerNumber.
","CurrentPeerNumber:当前的会话数量.
","创建新的peer时,当前的会话数到达了系统设置的最大值CurrentPeerNumber.
","1.
创建peer的数量在控制在CurrentPeerNumber之内.
","NTP/4/PEER_SELE""PEER_SELE","GRADUAL_SET_TIME","Thepeerselectedbythesystemis[source-address].
","4","表示系统选择到的同步源地址.
","[source-address]:系统选择到的同步源地址.
","NTP/4/REFCLK_EVENTS","NTP/4/PEER_MAX_ASSOC","1.
正常运行信息,无需处理.
""REFCLK_EVENTS","GRADUAL_SET_TIME","Thereferenceclockisnotsychronized.
(ReferenceClockIpAddress=[string],EventDescription=[string],EventCode=[string])","4","本地参考时钟未同步.
","[ReferenceClockIpAddress]:参考时钟地址.
[EventDescription]:事件描述.
[EventCode]:事件码.
","当本地参考时钟的跳数变为不可达的时候NTP_LEAP_NONINSYNC,上报产生该不可达的原因.
","NTP/4/SOURCE_LOST","1.
正常运行信息,无需处理.
""SOURCE_LOST","GRADUAL_SET_TIME","Systemsynchronizationsourcelost.
(SourceAddress=[STRING],Reason=[STRING])","4","系统同步源丢失.
","SourceAddress:表示处于非同步状态的源参考时钟的IP地址.
Reason:表示源参考时钟处于非同步状态的原因:·Unknown:未知·Autokeyconfigurationchanged:自动密钥配置改变·NTPIPv4servicedisabled:IPv4的NTP服务去使能·NTPIPv6servicedisabled:IPv6的NTP服务去使能·Clockchangedetected:检测到时钟发生改变·Authenticationexpected:需要认证·Autokeyfailure:自动密钥失效·DENY/RSTRreceived:接收到DENY/RSTR·RATEreceived:接收到RATE·CRPTO-NAKreceived:接收到CRPTO-NAK·Authenticationfailure:认证失败·Clockselectionfailed-Nointersection:时钟选择失败—无交集·Systempeerchangedetected:检测到系统远端对等体发生改变·Peerreachabilitylost:远端对等体无法联系·Sourceaddresschangedetected.
Autokeydancerestarted:检测到源地址发生改变,自动密钥重启·Referenceclockunreachable:参考时钟无法联系·Peerclockunsynchronized/unselectable:远端时钟没有同步/没有被选择·Stratumincreasedetected:检测到层数增加·Clockselectionfailed-Noselectableclock:时钟选择失败—没有可选择的时钟·Clockselectionfailed-Toomanyfalsetickers:时钟选择失败—过多的错误ticker·Broadcastclient'sinterfaceunavailable:广播客户端端口不可获得·Broadcastclient'sinterfaceVPNchanged:广播客户端端口VPN发生改变·Authenticationconfigurationchanged:认证配置发生改变·IPv6servicedisabledIPv6:服务去使能·Sourceinterfaceunavailable:源端口不可获得·VPNchangedetected:检测到VPN发生改变·Manycastdiscoveryrestarted:重启多播报文检测功能·Configurationchanged:配置发生改变·Manycastparentdeleted:删除多播报文源","时钟同步过程中,系统由于某些原因丢掉了当前的同步源,而这个时候又没有其他的候选同步源的时候,就会输出时钟丢失的日志.
","1.
检查网络是否连通.
2.
执行命令displayntp-servicesessions检查是否有候选的同步源存在.
1).
如果是,请执行步骤3.
2).
如果不是,请执行命令ntp-serviceunicast-peerip-address或ntp-serviceunicast-serverip-address配置同步源.
3.
执行命令displayntp-servicestatus检查服务器的状态是否稳定.
1).
如果是,请执行步骤4.
2).
如果不是,请执行步骤5.
4.
执行命令displayclock检查硬件时钟是否正常.
1).
如果是,请执行步骤6.
2).
如果不是,请执行步骤5.
5.
请收集配置和日志相关信息,并联系华为技术支持工程师.
6.
结束","NTP/4/STEP_GET_TIME""STEP_GET_TIME","GRADUAL_SET_TIME","Failedtogetsystemtimeintheprocessofstepadjustment.
","4","单步调整过程中,获取系统时间失败.
","单步调整时,获取系统时间失败.
","无:无","NTP/4/STEP_SET_TIME","1.
正常运行信息,无需处理.
""STEP_SET_TIME","GRADUAL_SET_TIME","Failedtosetsystemtimeintheprocessofstepadjustment.
","4","单步调整过程中,设定系统时间失败.
","NTP/4/STRATUM_CHANGE","无:无","NTP/4/STRATUM_CHANGE","1.
正常运行信息,无需处理.
""STRATUM_CHANGE","GRADUAL_SET_TIME","Systemstratumchangesfrom[stratum1]to[stratum2].
(SourceAddress=[STRING])","4","源参考时钟的系统层数改变.
","[stratum1]:时钟更新前的系统层数.
[stratum2]:时钟更新后的系统层数.
SourceAddress:源参考时钟的IP地址.
","NTP/4/TIMER_INIT","NTP/4/PEER_MAX_ASSOC","1.
正常运行信息,无需处理.
""TIMER_INIT","GRADUAL_SET_TIME","Failedtoinitializethetimerwhencreatingthetimer.
","4","创建定时器过程中,定时器初始化失败.
","原因1:系统初始化时,由于分配内存失败原因2:队列满而造成的创建定时器失败.
","无:无","OEM/4/OEMLOADFAILURE","1.
正常运行信息,无需处理.
""OEM","OEMLOADFAILURE","TheOEMfile[file-name]failstobeloaded.
([reason])","4","OEM文件加载失败.
","file-name:OEM文件名.
reason:文件加载失败的原因.
·指定的文件不存在.
·指定的文件超过最大值.
·指定的文件不是zip压缩包格式.
·指定的OEM文件非法.
·加载OEM文件失败.
","参见里的原因描述.
","1.
确保OEM文件存在,且是合法的文件.
2.
OEM文件不能超过最大值(里面的oem_basic.
txt、oem_lcs.
txt都不能超过1K).
3.
确保OEM文件是zip压缩包格式.
4.
确定加载OEM是否成功.
","OEM/4/OEMLOADSUCCESS""OEMLOADSUCCESS","OEMLOADFAILURE","TheOEMfile[file-name]issuccessfullyloaded.
","4","OEM文件加载成功.
","OSPF/6/ADD_NBR_PRLIST_VLINK","无:无","NLOG/6/NLGUPDT","1.
正常运行信息,无需处理.
""OSPF","ADD_NBR_PRLIST_VLINK","OSPF[process-id]addsvirtualneighbortopre-restartneighborlist.
(RouterId=[IPADDR],TransitAreaId=[IPADDR],HelperVirtNbrCount=[ULONG],HelperShamLinkNbrCount=[ULONG],HelperNormalNbrCount=[ULONG])","6","OSPF通过虚连接发现预重启邻居.
","[process-id]:OSPF进程.
RouterId:路由器标识.
TransitAreaId:传输区域标识.
HelperVirtNbrCount:Helper的虚连接邻居数.
HelperShamLinkNbrCount:Helper伪连接邻居数.
HelperNormalNbrCount:Helper正常连接邻居数.
","OSPF/4/ALL_NBR_FULL_EXIT","[process-id]:OSPF进程.
RouterId:路由器标识.
TransitAreaId:传输区域标识.
HelperVirtNbrCount:Helper的虚连接邻居数.
HelperShamLinkNbrCount:Helper伪连接邻居数.
HelperNormalNbrCount:Helper正常连接邻居数.
","1.
正常运行信息,无需处理.
""ALL_NBR_FULL_EXIT","ADD_NBR_PRLIST_VLINK","OSPF[process-id]exitedGRsuccessfully.
","4","退出GR成功.
","[process-id]:进程号.
","OSPF/4/AUTO_CHG_RTRID","[process-id]:进程号.
","1.
正常运行信息,无需处理.
""AUTO_CHG_RTRID","ADD_NBR_PRLIST_VLINK","OSPFautomaticallychangestherouterIDwhendetectingrouterIDconflictinthearea.
(ProcessId=[USHORT],NewRouterId=[IPADDR],OldRouterId=[IPADDR],ConflictRtrIdNum=[ULONG])","4","OSPF在区域内检测到路由器标识冲突后,自动更改路由标识.
","ProcessId:进程号.
NewRouterId:新选择的路由器标识.
OldRouterId:原有的路由器标识.
ConflictRtrIdNum:冲突的路由器标识个数.
","在一个区域内有至少两台非直连路由器的RouterID配置相同,导致routerlsa不断刷新,路由振荡.
","1.
如果缺省情况下使能了ospfrouter-idauto-recoverdisable的功能,则当区域内发现RouterID冲突后,系统会自动恢复.
2.
如果系统无法自动恢复,则需要手动修改RouterID.
","OSPF/6/BACKUP_AFTER_CFM""BACKUP_AFTER_CFM","ADD_NBR_PRLIST_VLINK","OSPFbackedupdatainbatchesafterCFM.
","6","OSPF开始备份批量数据.
","OSPF接收到RM的备份回调消息.
","无:无","OSPF/6/BACKUP_BEFORE_CFM","1.
正常运行信息,无需处理.
""BACKUP_BEFORE_CFM","ADD_NBR_PRLIST_VLINK","OSPFbackedupdatainbatchesbeforeCFM.
","6","OSPF/6/BACKUP_LENGTH_ERR","OSPF接收到RM的备份回调消息.
","无:无","OSPF/6/BACKUP_BEFORE_CFM","1.
正常运行信息,无需处理.
""BACKUP_LENGTH_ERR","ADD_NBR_PRLIST_VLINK","Thedatalengthwasunidentifiableintherestorationprocess.
(Type=[STRING],Length=[USHORT])","6","SMB在数据恢复过程中,TLV数据的长度不可识别.
","Type:数据类型.
Length:数据长度.
","TLV的数据长度不一致.
","1.
执行displaycurrent-configurationospf命令检查主备板配置是否一致.
1)Y=>3.
2)N=>2.
2.
对于不一致的命令要在备板单独配置.
3.
请联系华为技术支持工程师.
","OSPF/6/BACKUP_TYPE_ERR""BACKUP_TYPE_ERR","ADD_NBR_PRLIST_VLINK","Thedatatypewasunidentifiableintherestorationprocess.
(Type=[USHORT])","6","SMB在数据恢复过程中,TLV数据的类型不可识别.
","Type:数据类型.
","TLV的数据类型不一致.
","OSPF/6/BAD_IP_PACKET","OSPF/6/BACKUP_TYPE_ERR""BAD_IP_PACKET","ADD_NBR_PRLIST_VLINK","ReceivedthefirstbadIPpacketwithinanintervalof15minutes.
(ErrorType=[STRING],ErrorInformation=[STRING],InterfaceName=[STRING],SourceAddress=[IPADDR],DestinationAddress=[IPADDR],Count=[ULONG],PacketContent=[STRING])","6","15分钟内收到第一个错误报文打印该日志,针对每种错误类型进行抑制,不同错误类型之间不会互相影响.
","ErrorType:报文错误类型.
ErrorInformation:报文关键错误信息.
InterfaceName:接口名称.
SourceAddress:报文源IP地址.
DestinationAddress:报文目的IP地址.
Count:该错误类型报文统计计数.
每次打印日志时都清0,也就是说计数的是上次打印日志和这次打印日志之间的该错误类型报文数.
PacketContent:报文内容,16进制格式.
","当设备收到错误的IP报文,例如IP报文长度小于OSPF最小报文头长度等发生的错误,会打印该条日志.
对于相同类型的错误报文,则进行了15分钟抑制.
","OSPF/6/BAD_LSA","CFM/4/RST_CFG""BAD_LSA","ADD_NBR_PRLIST_VLINK","ReceivedthefirstbadLSAwithinanintervalof15minutes.
(ErrorType=[STRING],ErrorInformation=[STRING],ProcessId=[USHORT],InterfaceName=[STRING],LsaType=[USHORT],AdvertisingRouter=[IPADDR],LinkStateId=[IPADDR],Count=[ULONG],LsaContent=[STRING])","6","15分钟内收到第一个错误的OSPFLSA,针对每种错误类型进行抑制,不同错误类型之间不会互相影响.
","ErrorType:报文错误类型.
ErrorInformation:报文关键错误信息.
ProcessId:进程标识.
InterfaceName:接口名称.
LsaType:LSA类型.
AdvertisingRouter:LSA宣告路由器.
LinkStateId:链路状态标识.
Count:该错误类型报文统计计数.
每次打印日志时都清0,也就是说计数的是上次打印日志和这次打印日志之间的该错误类型报文数.
LsaContent:LSA内容,16进制格式.
","当收到错误的LSA,例如LSA的checksum发生错误等原因,会发送该条日志.
对于相同类型的错误LSA,则进行了15分钟抑制.
","1.
请检查发送该错误LSA的设备.
2.
请联系华为技术支持工程师.
","OSPF/6/BAD_OSPF_PACKET""BAD_OSPF_PACKET","ADD_NBR_PRLIST_VLINK","ReceivedthefirstbadOSPFpacketwithinanintervalof15minutes.
(ErrorType=[STRING],ErrorInformation=[STRING],ProcessId=[USHORT],InterfaceName=[STRING],SourceAddress=[IPADDR],DestinationAddress=[IPADDR],NeighborRouterId=[IPADDR],PacketType=[USHORT],Count=[ULONG],PacketLength=[USHORT],PacketContent=[STRING])","6","15分钟内收到第一个错误的OSPF报文,针对每种错误类型进行抑制,不同错误类型之间不会互相影响.
","ErrorType:报文错误类型.
ErrorInformation:报文关键错误信息.
ProcessId:进程标识.
InterfaceName:接口名称.
SourceAddress:报文源IP地址.
DestinationAddress:报文目的IP地址.
NeighborRouterId:邻居路由器标识.
PacketType:报文类型.
Count:该错误类型报文统计计数.
每次打印日志时都清0,也就是说计数的是上次打印日志和这次打印日志之间的该错误类型报文数.
PacketLength:报文长度.
PacketContent:报文内容,16进制格式.
","当收到错误的OSPF报文时,例如认证失败,或者OSPF报文解析失败时,会发送该日志.
对于相同类型的错误报文,则进行了15分钟抑制.
","1.
根据错误类型判断.
·认证失败,请检查路由器配置.
·OSPF报文解析失败,请查找发送报文错误的路由器.
2.
请联系华为技术支持工程师.
","OSPF/4/CHG_LSA_HELPER_FAIL""CHG_LSA_HELPER_FAIL","ADD_NBR_PRLIST_VLINK","OSPF[process-id]cannotenterhelpermode,changedLSAinretransmitionlistforrestartingneighbor[neighbor-ip-address].
","4","正在重启的邻居的重传列表中含有变化的LSA.
","[process-id]:进程号.
[neighbor-ip-address]:邻居IP地址.
","OSPF/4/CONFLICT_IP_ADDRESS","[process-id]:进程号.
[neighbor-ip-address]:邻居IP地址.
","1.
正常运行信息,无需处理.
""CONFLICT_IP_ADDRESS","ADD_NBR_PRLIST_VLINK","OSPFinterfaceIPaddressconflictisdetectedonintra-area.
(ProcessId=[USHORT],RouterId=[IPADDR],AreaId=[IPADDR],InterfaceName=[STRING],IpAddr=[IPADDR],AdvertiseRouterId=[IPADDR])","4","OSPF在区域内检测到接口IP地址冲突.
","ProcessId:进程号.
RouterId:路由器标识.
AreaId:区域标识.
InterfaceName:接口名称.
IpAddr:IP地址.
AdvertiseRouterId:宣告路由器标识","同一个区域内的非直连的两台路由器配置了相同的IP地址,其中一台作为DR发布networkLSA,导致路由不断振荡.
","1.
修改冲突的IP地址,保证在同一个区域内路由器接口不使用相同的IP地址.
","OSPF/6/CONFLICT_ROUTERID_INTER""CONFLICT_ROUTERID_INTER","ADD_NBR_PRLIST_VLINK","OSPFRouteridconflictmaybeoccuroninter-area.
(ProcessId=[USHORT],RouterId=[IPADDR])","6","由于外部路由不断刷新,OSPF可能发生区域间路由器标识冲突.
","ProcessId:进程号.
RouterId:路由器标识.
","在一个区域内有至少两台非直连路由器的routerid配置相同,导致routerlsa不断刷新,路由振荡.
","1.
检查外部路由振荡原因,如果存在区域间routerid冲突,请修改routerid配置.
","OSPF/4/CONFLICT_ROUTERID_INTF""CONFLICT_ROUTERID_INTF","ADD_NBR_PRLIST_VLINK","OSPFRouteridconflictisdetectedoninterface.
(ProcessId=[USHORT],RouterId=[IPADDR],AreaId=[IPADDR],InterfaceName=[STRING],IpAddr=[IPADDR],PacketSrcIp=[IPADDR])","4","OSPF在接口上检测到路由器标识冲突.
","ProcessId:进程号.
RouterId:路由器标识.
AreaId:区域标识.
InterfaceName:接口名称IpAddr:IP地址.
PacketSrcIp:报文源地址.
","直连接口配置冲突的routerid触发.
","1.
通过接口找到冲突的routerid,修改routerid配置.
","OSPF/4/CONFLICT_ROUTERID_INTRA""CONFLICT_ROUTERID_INTRA","ADD_NBR_PRLIST_VLINK","OSPFRouteridconflictisdetectedonintra-area.
(ProcessId=[USHORT],RouterId=[IPADDR],AreaId=[IPADDR],NbrInterfaceIp1=[IPADDR],NbrInterfaceIp2=[IPADDR])","4","OSPF在区域内检测到路由器标识冲突.
","ProcessId:进程号.
RouterId:路由器标识.
AreaId:区域标识.
NbrInterfaceIp1:邻居一个接口的IP地址.
NbrInterfaceIp2:邻居另一个接口的IP地址.
","1.
修改冲突的RouterID,保证网络上在同一个区域内没有路由器的routerid配置重复.
","1.
如果缺省情况下使能了ospfrouter-idauto-recoverdisable的功能,则当区域内发现RouterID冲突后,系统会自动恢复.
2.
如果系统无法自动恢复,则需要手动修改RouterID.
","OSPF/6/DEL_NBR_PRLIST""DEL_NBR_PRLIST","ADD_NBR_PRLIST_VLINK","OSPF[process-id]deletesneighborfrompre-restartneighborlist.
(RouterId=[IPADDR],IpAddress=[IPADDR],HelperVirtNbrCount=[ULONG],HelperShamLinkNbrCount=[ULONG],HelperNormalNbrCount=[ULONG]).
","6","OSPF进程从预重启邻居列表里删除邻居.
","[process-id]:OSPF进程号.
RouterId:邻居路由器的RouterID.
IpAddress:本地路由器运行GR的接口的IP地址.
HelperVirtNbrCount:作为Helper的虚连接邻居个数.
HelperShamLinkNbrCount:作为Helper的伪连接邻居个数.
HelperNormalNbrCount:作为Helper的正常连接邻居个数.
","对于GRRestarter,当它和Helper的邻居状态变为Full时,会把这个Helper从预重启邻居列表里删除.
对于PartlyGRRestarter,当有接口执行GR失败,退出GR时,会把这个接口下所有的Helper邻居,从预重启邻居列表里删除.
","OSPF/6/DEL_NBR_PRLIST_VLINK","1.

正常运行信息,无需处理.
""DEL_NBR_PRLIST_VLINK","ADD_NBR_PRLIST_VLINK","OSPF[process-id]deletesvirtualneighborfrompre-restartneighborlist.
(RouterId=[IPADDR],TransitAreaId=[IPADDR],HelperVirtNbrCount=[ULONG],HelperShamLinkNbrCount=[ULONG],HelperNormalNbrCount=[ULONG])","6","通过虚连接发现OSPF进程重启前的邻居.
","[process-id]:OSPF进程.
RouterId:路由器标识.
TransitAreaId:传输区域标识.
HelperVirtNbrCount:Helper邻居虚连接数量.
HelperShamLinkNbrCount:Helper伪连接邻居数量.
HelperNormalNbrCount:Helper正常连接邻居数量.
","OSPF/3/DR_ELECT_FAILED","[process-id]:OSPF进程.
RouterId:路由器标识.
TransitAreaId:传输区域标识.
HelperVirtNbrCount:Helper邻居虚连接数量.
HelperShamLinkNbrCount:Helper伪连接邻居数量.
HelperNormalNbrCount:Helper正常连接邻居数量.
","1.
正常运行信息,无需处理.
""DR_ELECT_FAILED","ADD_NBR_PRLIST_VLINK","OSPF[process-id]DRelectionfailed.
ExitGRunsuccefullyasDRelectionfailed.
","3","路由器进行DR选举失败,退出GR模式.
","GR期间进行DR选举,并且选举失败.
","OSPF/4/AUTO_CHG_RTRID","OSPF/3/END_GR_NODE_IN_LIST","1.

正常运行信息,无需处理.
""END_GR_NODE_IN_LIST","ADD_NBR_PRLIST_VLINK","OSPF[process-id]GRperiodexpired.
ExitGRunsuccessfullyaspre-restartneighborliststillhas[prerestart-neighbor-count]node(s).
","3","GR时间到期,预重启邻居不为空,不成功退出GR.
","[process-id]:进程号.
[prerestart-neighbor-count]:邻居列表节点数.
","GR期间没有发现预重启邻居.
","OSPF/4/ENTER_HELPER_MODE","1.
正常运行信息,无需处理.
""ENTER_HELPER_MODE","ADD_NBR_PRLIST_VLINK","OSPF[process-id]neighbor[neighbor-information]entershelperoninterface[interface-ip-address].
","4","为某邻居进入helper模式.
","[process-id]:进程号.
[neighbor-information]:邻居信息.
[interface-ip-address]:接口IP地址.
","接口下进程进入helper模式.
","OSPF/6/FIND_NBR_SHAMLINK","1.
正常运行信息,无需处理.
""FIND_NBR_SHAMLINK","ADD_NBR_PRLIST_VLINK","OSPF[process-id]findspre-restartneighbor[prerestart-neighbor-id],onsham-linksource=[sham-link-ip-address]destination=[destination-ip-address].
Routetodestinationisfound.
","6","通过Shamlink发现预重启邻居.
","[process-id]:OSPF进程.
[prerestart-neighbor-id]:先前重启的邻居.
[sham-link-ip-address]:伪连接源地址.
[destination-ip-address]:目的IP地址.
","OSPF/6/FINISH_ADD_ASE","[process-id]:OSPF进程.
[prerestart-neighbor-id]:先前重启的邻居.
[sham-link-ip-address]:伪连接源地址.
[destination-ip-address]:目的IP地址.
","1.
正常运行信息,无需处理.
""FINISH_ADD_ASE","ADD_NBR_PRLIST_VLINK","OSPF[process-id]finishedfloodingofAS-externalLSAs.
","6","Helper从邻居收到1-wayhello报文,但是忽略1-way事件.
","PartialGR结束前需要洪泛AS-external.
","OSPF/4/AUTO_CHG_RTRID","OSPF/6/FINISH_ADD_NSSA","1.
正常运行信息,无需处理.
""FINISH_ADD_NSSA","ADD_NBR_PRLIST_VLINK","OSPF[process-id]finishedfloodingofNSSALSAs.
","6","PartialGR主备倒换结束前需要泛洪NSSALSA.
","PartialGR结束前需要泛洪NSSALSA.
","OSPF/4/AUTO_CHG_RTRID","OSPF/6/FLSH_STL_AS_LSA","1.
正常运行信息,无需处理.
""FLSH_STL_AS_LSA","ADD_NBR_PRLIST_VLINK","FinishflushingstaleAs-external-LSAsandNSSALSAs.
(ProcessId=[USHORT])","6","结束丢弃老化的AS-external-LSAs和NSSALSAs.
","ProcessId:进程号.
","丢弃老化的AS-external-LSAs和NSSALSAs.
","OSPF/6/FLUSH_STAL_AREA_LSA","1.
正常运行信息,无需处理.
""FLUSH_STAL_AREA_LSA","ADD_NBR_PRLIST_VLINK","FlushstaleareaLSAs.
(ProcessId=[USHORT])","6","开始丢弃老化的AreaLSAs.
","丢弃老化的AreaLSAs.
","丢弃老化的AS-external-LSAs和NSSALSAs.
","OSPF/6/GR_ADD_NBR_PRLIST","1.
正常运行信息,无需处理.
""GR_ADD_NBR_PRLIST","ADD_NBR_PRLIST_VLINK","OSPF[process-id]addsneighbortopre-restartneighborlist.
(RouterId=[IPADDR],IPAddress=[IPADDR],HelperVirtNbrCount=[ULONG],HelperShamLinkNbrCount=[ULONG],HelperNormalNbrCount=[ULONG])","6","OSPF进程添加邻居到预重启邻居列表.
","[process-id]:OSPF进程号.
RouterId:邻居路由器的RouterID.
IPAddress:本地路由器运行GR的接口的IP地址.
HelperVirtNbrCount:作为Helper的虚连接邻居个数.
HelperShamLinkNbrCount:作为Helper的伪连接邻居个数.
HelperNormalNbrCount:作为Helper的正常连接邻居个数.
","OSPF/4/GR_END_SUCCESS","[process-id]:OSPF进程号.
RouterId:邻居路由器的RouterID.
IPAddress:本地路由器运行GR的接口的IP地址.
HelperVirtNbrCount:作为Helper的虚连接邻居个数.
HelperShamLinkNbrCount:作为Helper的伪连接邻居个数.
HelperNormalNbrCount:作为Helper的正常连接邻居个数.
","1.
正常运行信息,无需处理.
""GR_END_SUCCESS","ADD_NBR_PRLIST_VLINK","OSPF[process-id]GRperiodexpired.
ExitGRsuccessfullyaspre-restartneighborlistbeingempty.
","4","GR时间到期,预重启邻居为空,成功退出GR.
","正常退出GR.
","OSPF/4/AUTO_CHG_RTRID","OSPF/3/GR_EXIT_GR_UNSU","1.

正常运行信息,无需处理.
""GR_EXIT_GR_UNSU","ADD_NBR_PRLIST_VLINK","OSPF[process-id]exitedGRUnsuccessfully.
","3","退出GR失败.
","非正常因素引起GR失败.
","OSPF/4/AUTO_CHG_RTRID","OSPF/4/GR_EXIT_HLP_SU","1.

正常运行信息,无需处理.
""GR_EXIT_HLP_SU","ADD_NBR_PRLIST_VLINK","OSPF[process-id]neighbor[neighbor-information]exitshelpersuccessfullyoninterface[interface-ip-address].
","4","某进程下的邻居在某接口退出GR成功.
","helper成功退出GR.
","接口下进程进入helper模式.
","OSPF/4/GR_HLP_TIMER_FIRED","1.

正常运行信息,无需处理.
""GR_HLP_TIMER_FIRED","ADD_NBR_PRLIST_VLINK","OSPF[process-id]helperwaitsfortimertobefired,becausegraceperiodexpiredoninterface[interface-name].
","4","在helper端,某接口等待计时器被创建.
","[process-id]:进程号.
[interface-name]:接口名称.
","Helper进入GR创建等待记时器","OSPF/3/GR_IF_CHANGE","1.
正常运行信息,无需处理.
""GR_IF_CHANGE","ADD_NBR_PRLIST_VLINK","OSPF[process-id]exitedGRmodeasinterfacestatuschanged.
(InterfaceName=[STRING],IpAddress=[IPADDR])","3","接口改变,退出GR.
","[process-id]:进程号.
InterfaceName:接口名称.
IpAddress:IP地址.
","接口改变,GR失败退出GR模式.
","OSPF/4/GR_NOTIFYRM_EXIT_GR","1.
正常运行信息,无需处理.
""GR_NOTIFYRM_EXIT_GR","ADD_NBR_PRLIST_VLINK","OSPF[process-id]notifiedthatRMprocessexitedGR.
","4","GR完成,同时RM退出GR.
","GR完成.
","OSPF/4/AUTO_CHG_RTRID","OSPF/4/GR_RECV_1WAY_HELLO","1.

正常运行信息,无需处理.
""GR_RECV_1WAY_HELLO","ADD_NBR_PRLIST_VLINK","OSPF[process-id]exitsGRmodeas1-wayhelloisreceivedfromneighbor[neighbor-ip-address],oninterface[interface-name].
","4","从某接口的某邻居收到1-way的Hello报文,退出GR.
","[process-id]:进程号.
[neighbor-ip-address]:邻居IP地址.
[interface-name]:接口名称.
","Restarter收到1-way的Hello报文.
","OSPF/4/GR_START_GR","1.
正常运行信息,无需处理.
""GR_START_GR","ADD_NBR_PRLIST_VLINK","OSPF[process-id]startingIETFGR.
4","OSPF开始优雅重启.
","OSPF/6/HELLO_SEND_TIMESTAMP","OSPF/4/AUTO_CHG_RTRID","OSPF/6/HELLO_SEND_TIMESTAMP","1.

正常运行信息,无需处理.
""HELLO_SEND_TIMESTAMP","ADD_NBR_PRLIST_VLINK","OSPFhellopacketsendingtimestamprecordwhenneighborstateleavesfullorchangestodown.
(ProcessId=[USHORT],NeighborRouterId=[IPADDR],NeighborAreaId=[ULONG],NeighborInterface=[STRING],SendTimpstamp1=[STRING],SendTimpstamp2=[STRING],SendTimpstamp3=[STRING],SendTimpstamp4=[STRING],SendTimpstamp5=[STRING],SendTimpstamp6=[STRING],SendTimpstamp7=[STRING],SendTimpstamp8=[STRING],CurrentTimpstamp=[STRING])","6","由于OSPF所属的路由任务存在得不到调度的情况,这样会导致OSPFHello报文迟迟得不到发送,引起邻居状态改变.
在邻居状态离开full时,即打印OSPF_NBR_DOWN_REASON日志的时候,同时将最近8次Hello报文发送的时间戳记录在日志中打印出来,方便网上问题定位和维护查看.
","ProcessId:进程号.
NeighborRouterId:邻居路由器标识.
NeighborAreaId:邻居区域标识.
NeighborInterface:接口名称.
SendTimpstamp1:发送时间戳1.
SendTimpstamp2:发送时间戳2.
SendTimpstamp3:发送时间戳3.
SendTimpstamp4:发送时间戳4.
SendTimpstamp5:发送时间戳5.
SendTimpstamp6:发送时间戳6.
SendTimpstamp7:发送时间戳7.
SendTimpstamp8:发送时间戳8.
CurrentTimpstamp:当前时间戳.
","在协议运行过程中,由于报文交互异常,可能导致邻居状态离开full,此时就会触发记录这条日志,将邻居状态离开full前发送的8条Hello报文时间记录下来,方便定位邻居状态改变原因.
","OSPF/4/HLP_EXIT_RECV_LSA","1.

正常运行信息,无需处理.
""HLP_EXIT_RECV_LSA","ADD_NBR_PRLIST_VLINK","OSPF[process-id]exitsthehelpermodebecausefloodingreceivedchangedLSA.
(InterfaceName=[STRING],LsaType=[USHORT],AdvertisingRouter=[IPADDR],LinkId=[IPADDR]).
","4","退出helper模式,收到changeLSA.
","process-id:进程号.
InterfaceName:接口名称.
LsaType:LSA类型.
AdvertisingRouter:发布路由器.
LinkId:链路ID.
","拓扑改变.
","OSPF/6/IF_CHG_E","1.
正常运行信息,无需处理.
""IF_CHG_E","ADD_NBR_PRLIST_VLINK","Interface[interface-address]receivedevent[interface-event],interfacestatechangedfrom[interface-previous-state]to[interface-current-state].
(ProcessId=[USHORT])","6","接口状态发生改变.
","[interface-address]:接口地址.
[interface-event]:事件.
[interface-previous-state]:接口先前状态.
[interface-current-state]:接口当前状态.
ProcessId:进程号.
","接口状态改变.
","1.
执行displayospfinterface命令,检查接口状态.
2.
请联系华为技术支持工程师.
","OSPF/6/IF_TYPE_CHG""IF_TYPE_CHG","ADD_NBR_PRLIST_VLINK","Physicalinterfacetypechanged.
(InterfaceName=[STRING],InterfaceIndex=[STRING],PreviousPhysicalInterfaceType=[ULONG],CurrentPhysicalInterfaceType=[ULONG])","6","OSPF物理接口信息改变.
","InterfaceName:接口名称.
InterfaceIndex:接口索引.
PreviousPhysicalInterfaceType:先前接口类型.
CurrentPhysicalInterfaceType:现接口类型.
","物理接口类型改变.
","OSPF/3/INTF_EXIT_HLP_FAIL","1.
正常运行信息,无需处理.
""INTF_EXIT_HLP_FAIL","ADD_NBR_PRLIST_VLINK","OSPF[process-id]exitinginterfacelevelhelpermodeunsuccessfullyforInterface[interface-ip-address]dueto[neighbor-information].
","3","某进程下的某接口退出helper模式失败.
","[process-id]:进程号.
[interface-ip-address]:接口IP地址.
[neighbor-information]:邻居信息.
","退出Helper模式失败.
","OSPF/6/ISSU_SMB_CMD_ERR","1.
正常运行信息,无需处理.
""ISSU_SMB_CMD_ERR","ADD_NBR_PRLIST_VLINK","TheSMBfailedtorunCommand([command]).
","6","命令在SMB执行失败.
","[command]:执行失败的命令.
","SMB执行命令失败.
","OSPF/3/ISSU_SMOOTH_ACROSS","OSPF/6/BACKUP_TYPE_ERR""ISSU_SMOOTH_ACROSS","ADD_NBR_PRLIST_VLINK","TheOSPFbackupmodulereceivedtheISSU_SMOOTH_ACROSSeventfromtheISSUmanagementmodule.
","3","OSPFISSU升级过程中收到模块间平滑消息.
","ISSU备份阶段收到模块间平滑的消息.
","无:无","OSPF/3/ISSU_SMOOTH_INSIDE","1.
正常运行信息,无需处理.
""ISSU_SMOOTH_INSIDE","ADD_NBR_PRLIST_VLINK","TheOSPFbackupmodulereceivedtheISSU_SMOOTH_INSIDEeventfromtheISSUmanagementmodule.
","3","OSPFISSU升级过程中收到模块内平滑消息.
","ISSU备份阶段收到模块内平滑的消息.
","无:无","OSPF/3/ISSU_SMOOTH_OVER","1.
正常运行信息,无需处理.
""ISSU_SMOOTH_OVER","ADD_NBR_PRLIST_VLINK","TheOSPFbackupmodulereceivedtheISSU_SMOOTH_OVEReventfromtheISSUmanagementmodule.
","3","OSPFISSU升级过程中收到平滑完毕消息.
","ISSU备份阶段收到平滑完毕的消息.
","无:无","OSPF/6/JOIN_MULGRP_FAIL","1.
正常运行信息,无需处理.
""JOIN_MULGRP_FAIL","ADD_NBR_PRLIST_VLINK","Failedtojointhemulticastgroup.
(MulticastGroupAddress=[IPADDR],ReturnValue=[STRING],InterfaceNetworkIndex=[ULONG],PhysicalIndex=[ULONG],InterfaceName=[STRING])","6","OSPF接口加入组播组失败.
","MulticastGroupAddress:组播组地址.
ReturnValue:返回值.
InterfaceNetworkIndex:接口网络索引.
PhysicalIndex:接口物理索引.
InterfaceName:接口名称.
","地址加入组播组.
","1.
检查接口的组播功能是否可用.
","OSPF/6/LDP_INIT_EVENT""LDP_INIT_EVENT","ADD_NBR_PRLIST_VLINK","Interface[interface-name]initialLDPsynchronizationstate[initial-state].
","6","LDP联动状态初始状态.
","[interface-name]:接口名称.
[initial-state]:初始状态.
","初始化LDP联动.
","OSPF/6/LDP_SYNC_CREA","1.
正常运行信息,无需处理.
""LDP_SYNC_CREA","ADD_NBR_PRLIST_VLINK","Interface[STRING]LDPsynchronizationholdmaximumcosttimercreated.
","6","LDP联动Holdmaxcost定时器创建.
","[STRING]:接口名称.
","使能LDP联动.
","OSPF/6/LDP_SYNC_EVENT","1.
正常运行信息,无需处理.
""LDP_SYNC_EVENT","ADD_NBR_PRLIST_VLINK","Interface[interface-name]received[ldp-synchronization-message]fromRM,LDPsynchronizationstate[previous-state]changeto[current-state].
","6","LDP联动状态发生迁移.
","[interface-name]:接口名称.
[ldp-synchronization-message]:LDP联动消息.
[previous-state]:本机先前状态.
[current-state]:本机目前状态.
","OSPF/6/LDP_SYNC_FIRE","[interface-name]:接口名称.
[ldp-synchronization-message]:LDP联动消息.
[previous-state]:本机先前状态.
[current-state]:本机目前状态.
","1.
正常运行信息,无需处理.
""LDP_SYNC_FIRE","ADD_NBR_PRLIST_VLINK","Interface[interface-name]LDPsynchronizationholdmaximumcosttimerexpired.
","6","LDP联动Holdmaxcost定时器超时.
","定时器超时.
","接口转变为不可用状态.
","OSPF/6/LEAVE_MULGRP_FAIL","1.
正常运行信息,无需处理.
""LEAVE_MULGRP_FAIL","ADD_NBR_PRLIST_VLINK","Failedtoleavethemulticastgroup.
(MulticastGroupAddress=[IPADDR],ReturnValue=[STRING],InterfaceNetworkIndex=[ULONG],PhysicalIndex=[ULONG],InterfaceName=[STRING])","6","OSPF接口离开组播组失败.
","MulticastGroupAddress:组播组地址.
ReturnValue:返回值.
InterfaceNetworkIndex:接口网络索引.
PhysicalIndex:接口物理索引.
InterfaceName:接口名称.
","地址离开组播组.
","OSPF/5/LSA_CHANGE_FREQUENT","OSPF/6/LDP_INIT_EVENT""LSA_CHANGE_FREQUENT","ADD_NBR_PRLIST_VLINK","LSAschangefrequentlynow.
(ProcessId=[USHORT],AdvertiseRouterId=[IPADDR],TotalCount=[ULONG],BeginTime=[STRING],EndTime=[STRING],Type-1LsaCount=[ULONG],Type-2LsaCount=[ULONG],Type-3LsaCount=[ULONG],Type-4LsaCount=[ULONG],Type-5LsaCount=[ULONG],Type-7LsaCount=[ULONG],Type-9LsaCount=[ULONG],Type-10LsaCount=[ULONG],Type-11LsaCount=[ULONG])","Whenbeingaskedwhethertocommitthecommand"undobulk-statenable",theuserchoseN.
","LSA正在频繁更新.
","ProcessId:进程号.
AdvertiseRouterId:宣告路由器标识.
TotalCount:LSA更新总次数.
BeginTime:计数开始时间.
EndTime:计数结束时间.
Type-1LsaCount:RouterLSA的更新次数.
Type-2LsaCount:NetworkLSA的更新次数.
Type-3LsaCount:summary-NetworkLSA的更新次数.
Type-4LsaCount:summary-ASBRLSA的更新次数.
Type-5LsaCount:ASELSA的更新次数.
Type-7LsaCount:7类LSA的更新次数.
Type-9LsaCount:9类LSA的更新次数.
Type-10LsaCount:10类LSA的更新次数.
Type-11LsaCount:11类LSA的更新次数.
","宣告路由器进行LSA更新计数,每小时输出一次历史记录,从中选出更新次数最多的10条记录,如其中有更新总次数超过100的,打印此日志.
","OSPF/3/MISMATCH_HELPER_FAIL","1.

正常运行信息,无需处理.
""MISMATCH_HELPER_FAIL","ADD_NBR_PRLIST_VLINK","OSPF[process-id]cannotenterhelpermode,neighbor-IDmismatchwithrestartingneighbor[interface-name].
","3","helper模式与restarter发送的graceLSA中的邻居ID不匹配,进入helper模式失败.
","[process-id]:进程号.
[interface-name]:接口名称.
","HelperGR配置与收到的gracelsa携带信息邻居ID不匹配,不能进入Helper模式.
","OSPF/4/NBR_CHANGE_E","1.
正常运行信息,无需处理.
""NBR_CHANGE_E","ADD_NBR_PRLIST_VLINK","Neighborchangesevent:neighborstatuschanged.
(ProcessId=[process-id],NeighborAddress=[neighbor-ip-address],NeighborEvent=[neighbor-event],NeighborPreviousState=[neighbor-previous-state],NeighborCurrentState=[neighbor-current-state])","4","ProcessId:进程号.
NeighborAddress:邻居地址.
NeighborEvent:邻居事件.
NeighborPreviousState:邻居先前状态.
NeighborCurrentState:邻居当前状态.
","[peer-address]:BGP对等体的IP地址.
[previous-state]:前一状态.
[current-state]:当前状态.
BgpAddressFamily:地址族名称.
","OSPF/3/NBR_CHG_DOWN","[peer-address]:BGP对等体的IP地址.
[previous-state]:前一状态.
[current-state]:当前状态.
BgpAddressFamily:地址族名称.
","1.
正常运行信息,无需处理.
""NBR_CHG_DOWN","ADD_NBR_PRLIST_VLINK","Neighborevent:neighborstatechangedtoDown.
(ProcessId=[USHORT],NeighborAddress=[IPADDR],NeighborEvent=[STRING],NeighborPreviousState=[STRING],NeighborCurrentState=[STRING])","3","邻居状态改变为Down.
","ProcessId:进程号.
NeighborAddress:邻居地址.
NeighborEvent:邻居触发的事件.
NeighborPreviousState:邻居变化前的状态.
NeighborCurrentState:邻居变化后的状态.
","邻居状态因为收到OSPF的报文或是影响OSPF邻居关系的操作,邻居状态发生迁移.
","OSPF/3/NBR_DOWN_REASON","1.
正常运行信息,无需处理.
""NBR_DOWN_REASON","ADD_NBR_PRLIST_VLINK","NeighborstateleavesfullorchangedtoDown.
(ProcessId=[USHORT],NeighborRouterId=[IPADDR],NeighborAreaId=[ULONG],NeighborInterface=[STRING],NeighborDownImmediatereason=[STRING],NeighborDownPrimeReason=[STRING],NeighborChangeTime=[STRING])","3","ProcessId:进程号.
NeighborRouterId:邻居路由器标识.
NeighborAreaId:邻居区域ID.
NeighborInterface:邻居接口.
NeighborDownImmediatereason:邻居Down的直接原因.
NeighborDownPrimeReason:邻居Down的初始原因.
NeighborChangeTime:状态改变时间.
","ProcessId:进程号.
NeighborAddress:邻居地址.
NeighborEvent:邻居触发的事件.
NeighborPreviousState:邻居变化前的状态.
NeighborCurrentState:邻居变化后的状态.
","OSPF/4/NBR_STATE_HELPER_F","OSPF/3/NBR_DOWN_REASON","1.
正常运行信息,无需处理.
""NBR_STATE_HELPER_F","ADD_NBR_PRLIST_VLINK","OSPF[process-id]cannotenterthehelpermodebecauseneighborstatusoftherestartingneighbor[neighbor-ip-address]isnotFULL.
","4","本端无法进入helper状态,因为对端不是Full.
","OSPF/6/NOTIFY_DEL_FINISHED","OSPF/4/CONFLICT_IP_ADDRESS","OSPF/6/NOTIFY_DEL_FINISHED","1.

正常运行信息,无需处理.
""NOTIFY_DEL_FINISHED","ADD_NBR_PRLIST_VLINK","OSPFhasfinisheddeletingallroutesandnotifiedroutemanagement.
(InstanceID=[USHORT])","6","OSPF实例通知路由管理模块已经删除了所有的路由.
","InstanceID:实例号.
","前缀限定配置变化,前缀超限,删除所有路由.
","OSPF/4/NOTIFYRM_ENTER_GR","1.
正常运行信息,无需处理.
""NOTIFYRM_ENTER_GR","ADD_NBR_PRLIST_VLINK","OSPF[process-id]notifiedRMthatitstartedGR.
","4","OSPF通知路由管理进入GR状态.
","OSPF需要优雅重启.
","OSPF/4/AUTO_CHG_RTRID","OSPF/6/NSSA_STATE_ELECT","1.

正常运行信息,无需处理.
""NSSA_STATE_ELECT","ADD_NBR_PRLIST_VLINK","ThestatusoftheNSSAtranslatorissetto[STRING].
(ProcessId=[USHORT],AreaId=[IPADDR])","6","NSSA的转换状态设置为选中状态、使能状态或去使能状态.
","[STRING]:NSSA的转换状态,包括选中状态、使能状态、去使能状态.
ProcessId:OSPF进程号.
AreaId:区域ID.
","路由器被选举为NSSA区域的translator.
","OSPF/6/ONE_IF_EXIT_WAITING","1.
正常运行信息,无需处理.
""ONE_IF_EXIT_WAITING","ADD_NBR_PRLIST_VLINK","OSPF[process-id]Interface[interface-name]exitswaitingstate,interfaceinwaitingstatecountis[waitng-state-count].
","6","退出等待状态,统计接口在等待状态数量.
","[process-id]:进程号.
[interface-name]:接口名称.
[waitng-state-count]:等待状态数量.
","OSPF/4/ONEIF_ENTER_WAITING","OSPF/4/GR_RECV_1WAY_HELLO","1.
正常运行信息,无需处理.
""ONEIF_ENTER_WAITING","ADD_NBR_PRLIST_VLINK","OSPF[process-id]interface[interface-name]enterswaitingstate,waitingstatecountis[interface-in-waiting-state-number].
","4","接口离开wait状态,目前还有接口处于wait状态.
","[interface-name]:接口名称.
[interface-in-waiting-state-number]:进入等待状态的接口数量.
[process-id]:进程号.
","接口收到Hello报文或者waittimer超时.
","OSPF/3/PAF_TYPE_LOSS_ISSU","1.
正常运行信息,无需处理.
""PAF_TYPE_LOSS_ISSU","ADD_NBR_PRLIST_VLINK","OSPFperformslossyupgradebecauseoftheinconsistentPAF[paf]file.
","3","OSPFISSU升级过程中检查到影响升级的PAF项.
","[paf]:PAF文件中的某个配置项.
","ISSU检查时发现存在不一致的PAF项.
","1.
记录影响升级的PAF项,并联系华为技术支持工程师.
","OSPF/4/PLCY_FAIL_HELPER_F""PLCY_FAIL_HELPER_F","ADD_NBR_PRLIST_VLINK","OSPF[process-id]cannotenterthehelpermodebecauseconfiguringpoliciesforrestartingpeer[interface-name]failed.
","4","Helper不能通过策略,进入helper模式失败.
","OSPF/6/RCV_MEM_RESTORE","HelperGR配置与收到的gracelsa携带信息邻居ID不匹配,不能进入Helper模式.
","OSPF/6/RCV_MEM_RESTORE","1.
正常运行信息,无需处理.
""RCV_MEM_RESTORE","ADD_NBR_PRLIST_VLINK","OSPFreceivedmemoryrestorationnotification.
","6","OSPF接收到内存恢复的通告.
","物理内存短缺恢复.
","无:无","1.
检查路由器内存使用状态.
","OSPF/6/RCV_RM_EVNT""RCV_RM_EVNT","ADD_NBR_PRLIST_VLINK","OSPF(AMB)backupprocessreceive[RM-backup-event]eventfromRM.
(SlaveHsbState=[slave-hsb-state])","6","备份进程从路由管理接收到事件.
","[RM-backup-event]:RM备份事件之一.
[slave-hsb-state]:备板HSB状态.
","备板开始备份数据.
","OSPF/4/RECV_DIFF_GRACE_LSA","1.
正常运行信息,无需处理.
""RECV_DIFF_GRACE_LSA","ADD_NBR_PRLIST_VLINK","OSPF[process-id]receivesagraceLSAdifferentfromtheoneinLSDBoninterface[interface-ip-address].
","4","GR期间收到gracelsa.
","[process-id]:进程号.
[interface-ip-address]:接口IP地址.
","Restarter正在GR,收到其他邻居路由器需要GR的请求或者Helper收到邻居路由器需要GR的请求.
","OSPF/4/RECV_FIRST_GLSA","1.

正常运行信息,无需处理.
""RECV_FIRST_GLSA","ADD_NBR_PRLIST_VLINK","OSPF[process-id]attemptedtoenterhelpermodeandreceivedfirstgraceLSAfromneighbor[neighbor-ip-address],oninterface[interface-ip-address].
","4","Helper收到Restarter需要进入GR的请求.
","[process-id]:进程号.
[neighbor-ip-address]:邻居IP地址.
[interface-ip-address]:接口IP地址.
","Restarter需要GR.
","OSPF/6/RECV_ROUT_LIMIT_MSG","1.
正常运行信息,无需处理.
""RECV_ROUT_LIMIT_MSG","ADD_NBR_PRLIST_VLINK","OSPFreceivedroutelimitmessagefromroutemanagement.
(InstanceID=[USHORT],MessageType=[STRING])","6","路由管理模块通知OSPF进行删除或安装路由等.
","InstanceID:实例号.
MessageType:消息类型.
","前缀限定配置变化,前缀超限,导致需要删除和重新安装路由.
","OSPF/6/RECV_SMB_DOWN_RM","1.
正常运行信息,无需处理.
""RECV_SMB_DOWN_RM","ADD_NBR_PRLIST_VLINK","OSPFbackupreceivesslavemainboardDowneventfromRM.
(SlaveHsbState=[ULONG])","6","OSPF备份收到RM的平滑结束事件.
","SlaveHsbState:备板HSB状态.
","OSPF备份收到RM的平滑结束消息.
","OSPF/6/RECV_SMOOTH_OVER_RM","1.
正常运行信息,无需处理.
""RECV_SMOOTH_OVER_RM","ADD_NBR_PRLIST_VLINK","OSPFbackupreceivessmoothovereventfromRM.
(SlaveHsbState=[ULONG])","6","OSPF备份收到RM的同步交叉事件.
","OSPF备份收到RM的同步交叉消息.
","OSPF备份收到RM的平滑结束消息.
","OSPF/6/RECV_SWITCH_RM","1.

正常运行信息,无需处理.
""RECV_SWITCH_RM","ADD_NBR_PRLIST_VLINK","OSPFbackupreceivesswitcheventfromRM.
(SlaveHsbState=[ULONG])","6","OSPF备份收到RM的备板down事件.
","OSPF备份收到RM的备板down消息.
","OSPF备份收到RM的平滑结束消息.
","OSPF/6/RECV_SYNC_ACROSS_RM","1.

正常运行信息,无需处理.
""RECV_SYNC_ACROSS_RM","ADD_NBR_PRLIST_VLINK","OSPFbackupreceivessynchronizationacrosseventfromRM.
(SlaveHsbState=[ULONG])","6","收到RM错误返回值.
","RM提供的API返回失败.
","OSPF备份收到RM的平滑结束消息.
","OSPF/3/RECV_TWO_GRACELSA","1.

正常运行信息,无需处理.
""RECV_TWO_GRACELSA","ADD_NBR_PRLIST_VLINK","OSPF[process-id]exitedGRmodeasgraceLSAreceivedfromneighbor[neighbor-ip-address],oninterface[interface-name].
","3","在某接口上收到gracelsa,退出GR.
","OSPF/6/RESET_SCHEDULE","Restarter收到1-way的Hello报文.
","[process-id]:进程号.
","1.
正常运行信息,无需处理.
""RESET_SCHEDULE","ADD_NBR_PRLIST_VLINK","OSPF[USHORT]resetscheduletable.
(ScheduleType=[STRING])","6","OSPF重设调度表.
","[USHORT]:进程号.
ScheduleType:调度类型.
","OSPF重置调度.
","OSPF/6/RESTORE_AFTER_CFM","1.
正常运行信息,无需处理.
""RESTORE_AFTER_CFM","ADD_NBR_PRLIST_VLINK","OSPFrestoreddatainbatchesafterCFM.
","6","OSPF开始恢复批量数据.
","OSPF/6/RESTORE_BEFORE_CFM","无:无","OSPF/6/BACKUP_BEFORE_CFM","1.
正常运行信息,无需处理.
""RESTORE_BEFORE_CFM","ADD_NBR_PRLIST_VLINK","OSPFrestoreddatainbatchesbeforeCFM.
","6","OSPF在命令行恢复之前开始恢复批量数据.
","OSPF/6/RM_GETROUTERID","无:无","OSPF/6/BACKUP_BEFORE_CFM","1.
正常运行信息,无需处理.
""RM_GETROUTERID","ADD_NBR_PRLIST_VLINK","InvokingtheRMGetRouterIDfailed.
(FID=[STRING],LN=[ULONG],ReturnValue=[STRING])","6","调用RMGetRouterID失败.
","FID:文件ID.
LN:行号.
ReturnValue:返回值.
","调用RMAPI返回失败.
","OSPF/6/RM_IM","1.
正常运行信息,无需处理.
""RM_IM","ADD_NBR_PRLIST_VLINK","InvokingtheRMIMfailed.
(FID=[STRING],LN=[ULONG],ReturnValue=[STRING])","6","调用RMIM失败.
","OSPF/4/RST_NBR_IN_PTIAL_GR","调用RMAPI返回失败.
","OSPF/6/RM_IM","1.
正常运行信息,无需处理.
""RST_NBR_IN_PTIAL_GR","ADD_NBR_PRLIST_VLINK","OSPF[process-id]enteredthepartialGRmodeandexitedGRforneighbor[neighbor-information]on[network-type]interface[interface-name].
","4","退出GR,进入到PartialGR.
","[process-id]:进程号.
[neighbor-information]:邻居信息.
[network-type]:网络类型.
[interface-name]:接口名称.
","退出GR,进入到PartialGR.
","OSPF/4/RTRLSA_BACKLINK_FAIL","1.
正常运行信息,无需处理.
""RTRLSA_BACKLINK_FAIL","ADD_NBR_PRLIST_VLINK","OSPF[process-id]exitsGRmodeasBacklinkcheckingfailedonneighbor[neighbor-ip-address],oninterface[interface-name].
","4","从某接口的某邻居收到backlink检查失败的LSA,退出GR.
","拓扑发生改变.
","Restarter收到1-way的Hello报文.
","OSPF/6/SHAMLINK_IF_CHG_E","1.

正常运行信息,无需处理.
""SHAMLINK_IF_CHG_E","ADD_NBR_PRLIST_VLINK","Shamlinkinterface[shamlink-interface-address]receivedevent[interface-event],interfacestatechangedfrom[interface-previous-state]to[interface-current-state].
(ProcessId=[USHORT])","6","伪连接接口收到改变事件,接口状态改变.
","[shamlink-interface-address]:伪连接接口地址.
[interface-event]:事件.
[interface-previous-state]:接口先前状态.
[interface-current-state]:接口当前状态.
ProcessId:进程号.
","Shamlink接口状态改变.
","OSPF/4/SHAMLINK_NBR_CHG_E","OSPF/6/IF_TYPE_CHG""SHAMLINK_NBR_CHG_E","ADD_NBR_PRLIST_VLINK","Shamlinkpeerevent:neighborstatuschanged.
(ProcessId=[USHORT],ShamlinkNeighborAddress=[IPADDR],NeighborEvent=[STRING],NeighborPreviousState=[STRING],NeighborCurrentState=[STRING])","4","伪连接邻居状态改变.
","ProcessId:进程号.
ShamlinkNeighborAddress:伪连接邻居地址.
NeighborEvent:收到事件.
NeighborPreviousState:邻居变化前的状态.
NeighborCurrentState:邻居变化后的状态.
","Shamlink邻居状态改变.
","1.
执行displayospfpeer命令检查邻居状态.
2.
请联系华为技术支持工程师.
","OSPF/3/SHAMLINK_NBR_DOWN""SHAMLINK_NBR_DOWN","ADD_NBR_PRLIST_VLINK","Shamlinkneighborevent:neighborstatechangedtoDown.
(ProcessId=[USHORT],NeighborAddress=[IPADDR],NeighborEvent=[STRING],NeighborPreviousState=[STRING],NeighborCurrentState=[STRING])","3","伪邻居状态因为收到OSPF的报文或是影响OSPF邻居关系的操作,邻居状态发生迁移.
","ProcessId:进程号.
NeighborAddress:邻居地址.
NeighborEvent:邻居触发的事件.
NeighborPreviousState:邻居变化前的状态.
NeighborCurrentState:邻居变化后的状态.
","邻居状态因为收到OSPF的报文或是影响OSPF邻居关系的操作,邻居状态发生迁移.
","OSPF/6/SMB_GETSESSION_ERR","1.

正常运行信息,无需处理.
""SMB_GETSESSION_ERR","ADD_NBR_PRLIST_VLINK","TheSMBfailedtogetthedestinationofbackupinformation.
(SessionType=[USHORT],DataLen=[USHORT],Key1=[ULONG],Key2=[ULONG],Key3=[ULONG],Key4=[ULONG],Key5=[ULONG],ErrCode=[ULONG])","6","备板获取备份数据目的端出错.
","SessionType:备份数据类型.
DataLen:备份数据长度.
Key1:备份数据关键字1.
Key2:备份数据关键字2.
Key3:备份数据关键字3.
Key4:备份数据关键字4.
Key5:备份数据关键字5.
ErrCode:错误码.
","备板找不到备份数据的目的地,无法接受该数据.
","1.
一般情况下无需处理.
出现异常后可以参考.
","OSPF/6/STUB_RT_EX_UD_STUB""STUB_RT_EX_UD_STUB","ADD_NBR_PRLIST_VLINK","OSPF[process-id]quitsstubrouterstatebyundoingstub.
","6","退出Stub路由器状态.
","OSPF/6/STUB_RT_ONBT_TM_CRT","OSPF/4/AUTO_CHG_RTRID","OSPF/6/STUB_RT_ONBT_TM_CRT","1.

正常运行信息,无需处理.
""STUB_RT_ONBT_TM_CRT","ADD_NBR_PRLIST_VLINK","OSPF[process-id]createsTIMERof[interval-for-stub-state]secondstomeasurestubrouterstate.
","6","进入Stub路由器状态.
","[process-id]:进程号.
[interval-for-stub-state]:Stub路由器状态计时器时长.
","OSPF/6/STUB_RT_STUB_ALW","[process-id]:进程号.
[interval-for-stub-state]:Stub路由器状态计时器时长.
","1.
正常运行信息,无需处理.
""STUB_RT_STUB_ALW","ADD_NBR_PRLIST_VLINK","OSPF[USHORT]deletesthestubroutertimer,asnewconfigurationisalwaysstub.
","6","配置Stub路由器.
","[USHORT]:进程号.
","OSPF/6/STUB_RT_TM_FIRE","[USHORT]:进程号.
","1.
正常运行信息,无需处理.
""STUB_RT_TM_FIRE","ADD_NBR_PRLIST_VLINK","OSPF[process-id]quitsstubrouterstateforovertime.
","6","OSPF/6/TRAP_AGE_LSA","OSPF/6/STUB_RT_ONBT_TM_CRT","OSPF/4/AUTO_CHG_RTRID","OSPF/6/STUB_RT_ONBT_TM_CRT","1.

正常运行信息,无需处理.
""TRAP_AGE_LSA","ADD_NBR_PRLIST_VLINK","NotifyLSAagedout.
(ProcessId=[USHORT],RouterId=[IPADDR],LsdbAreaId=[IPADDR],LsdbType=[ULONG],LsdbLsId=[IPADDR],LsdbRouterId=[IPADDR])","6","通知LSA老化.
","ProcessId:OSPF进程号.
RouterId:路由器ID.
LsdbAreaId:LSDB区域ID.
LsdbType:LSDB类型.
LsdbLsId:LSDB状态ID.
LsdbRouterId:LSDB路由器ID.
","OSPF/6/TRAP_HELPER_CHG","ProcessId:OSPF进程号.
RouterId:路由器ID.
LsdbAreaId:LSDB区域ID.
LsdbType:LSDB类型.
LsdbLsId:LSDB状态ID.
LsdbRouterId:LSDB路由器ID.
","1.
正常运行信息,无需处理.
""TRAP_HELPER_CHG","ADD_NBR_PRLIST_VLINK","Notifythechangeinrestarthelper.
(ProcessId=[USHORT],RouterId=[IPADDR],NeighborIpAddress=[IPADDR],NeighborAddressLessIndex=[ULONG],NeighborRouterId=[IPADDR],NeighborRestartHelperStatus=[ULONG],NeighborRestartHelperAge=[ULONG],NeighborRestartHelperExitReason=[ULONG])","6","通知平滑重启协助状态改变.
","ProcessId:OSPF进程号.
RouterId:路由器ID.
NeighborIpAddress:邻居IP地址.
NeighborAddressLessIndex:邻居地址索引号.
NeighborRouterId:邻居路由器ID.
NeighborRestartHelperStatus:邻居的GRHelper状态.
NeighborRestartHelperAge:邻居的GRHelper时间.
NeighborRestartHelperExitReason:邻居退出GRHelper原因.
","OSPF/4/TRAP_INTF_AUTH_FAIL","ProcessId:OSPF进程号.
RouterId:路由器ID.
NeighborIpAddress:邻居IP地址.
NeighborAddressLessIndex:邻居地址索引号.
NeighborRouterId:邻居路由器ID.
NeighborRestartHelperStatus:邻居的GRHelper状态.
NeighborRestartHelperAge:邻居的GRHelper时间.
NeighborRestartHelperExitReason:邻居退出GRHelper原因.
","1.
正常运行信息,无需处理.
""TRAP_INTF_AUTH_FAIL","ADD_NBR_PRLIST_VLINK","Interfaceauthenticationhasfailed.
(ProcessId=[USHORT],RouterId=[IPADDR],IpAddress=[IPADDR],AddressLessIndex=[ULONG],PacketSource=[IPADDR],ErrorType=[ULONG],PacketType=[ULONG])","4","接口验证失败.
","ProcessId:OSPF进程号.
RouterId:路由器ID.
IpAddress:IP地址.
AddressLessIndex:地址索引号.
PacketSource:报文源地址.
ErrorType:错误类型.
PacketType:报文类型.
","1.
执行displayospfinterface命令,检查此虚连接接口与邻居路由器的验证相关配置.
1)配置正确,则=>正常运行信息,无需处理.
2)配置错误,修改后如果还出现该日志,则=>2.
2.
请联系华为技术支持工程师.
","ProcessId:OSPF进程号.
RouterId:路由器ID.
IpAddress:IP地址.
AddressLessIndex:地址索引号.
PacketSource:报文源地址.
ErrorType:错误类型.
PacketType:报文类型.
","OSPF/6/TRAP_INTF_BAD_RX""TRAP_INTF_BAD_RX","ADD_NBR_PRLIST_VLINK","Interfacereceivedbadpacket.
(ProcessId=[USHORT],RouterId=[IPADDR],IpAddress=[IPADDR],AddressLessIndex=[ULONG],PacketSource=[IPADDR],PacketType=[ULONG])","6","接口收到错误报文.
","ProcessId:OSPF进程号.
RouterId:路由器ID.
IpAddress:IP地址.
AddressLessIndex:地址索引号.
PacketSource:报文源地址.
PacketType:报文类型.
","1.
检查并记录错误报文的源地址.
2.
请联系华为技术支持工程师.
","ProcessId:OSPF进程号.
RouterId:路由器ID.
IpAddress:IP地址.
AddressLessIndex:地址索引号.
PacketSource:报文源地址.
PacketType:报文类型.
","OSPF/4/TRAP_INTF_CFG_ERR""TRAP_INTF_CFG_ERR","ADD_NBR_PRLIST_VLINK","Interfaceconfigurationerrorhasoccurred.
(ProcessId=[USHORT],RouterId=[IPADDR],IpAddress=[IPADDR],AddressLessIndex=[ULONG],PacketSource=[IPADDR],ErrorType=[ULONG],PacketType=[ULONG])","4","接口配置错误.
","1.
执行displayospfinterface命令,检查此接口配置.
1)配置正确,则=>正常运行信息,无需处理.
2)配置错误,修改后如果还出现该日志,则=>2.
2.
请联系华为技术支持工程师.
","1.
执行displayospfinterface命令,检查此虚连接接口与邻居路由器的验证相关配置.
1)配置正确,则=>正常运行信息,无需处理.
2)配置错误,修改后如果还出现该日志,则=>2.
2.
请联系华为技术支持工程师.
","1.
执行displayospfinterface命令,检查此接口配置.
1)配置正确,则=>正常运行信息,无需处理.
2)配置错误,修改后如果还出现该日志,则=>2.
2.
请联系华为技术支持工程师.
","OSPF/6/TRAP_INTF_CHG""TRAP_INTF_CHG","ADD_NBR_PRLIST_VLINK","Interfacestatehaschanged.
(ProcessId=[USHORT],RouterId=[IPADDR],IpAddress=[IPADDR],InterfaceIndex=[ULONG],InterfaceState=[ULONG])","6","ProcessId:OSPF进程号.
RouterId:路由器ID.
IpAddress:IP地址.
InterfaceIndex:接口索引号.
InterfaceState:接口状态.
","1.
执行displayospfinterface命令,检查接口状态.
2.
请联系华为技术支持工程师.
","OSPF/6/TRAP_INTF_RETX","1.
执行displayospfinterface命令,检查接口状态.
2.
请联系华为技术支持工程师.
","1.
正常运行信息,无需处理.
""TRAP_INTF_RETX","ADD_NBR_PRLIST_VLINK","Interfacehasretransmitted.
(ProcessId=[USHORT],RouterId=[IPADDR],IpAddress=[IPADDR],AddressLessIndex=[ULONG],NeighborRouterId=[IPADDR],PacketType=[ULONG],NeighborIpAddress=[IPADDR],NeighborAddressLessIndex=[ULONG],LsdbAreaId=[IPADDR],LsdbType=[ULONG],LsdbLsId=[IPADDR],LsdbRouterId=[IPADDR])","6","接口重传报文.
","ProcessId:OSPF进程号.
RouterId:路由器ID.
IpAddress:IP地址.
AddressLessIndex:地址索引号.
NeighborRouterId:邻居路由器ID.
PacketType:报文类型.
NeighborIpAddress:邻居IP地址.
NeighborAddressLessIndex:邻居地址索引号.
LsdbAreaId:在LSDB中的LSA区域ID.
LsdbType:在LSDB中的LSA类型.
LsdbLsId:在LSDB中的LSAID.
LsdbRouterId:在LSDB中的路由器ID.
","OSPF/6/TRAP_LSDB_APP_OFLOW","ProcessId:OSPF进程号.
RouterId:路由器ID.
IpAddress:IP地址.
AddressLessIndex:地址索引号.
NeighborRouterId:邻居路由器ID.
PacketType:报文类型.
NeighborIpAddress:邻居IP地址.
NeighborAddressLessIndex:邻居地址索引号.
LsdbAreaId:在LSDB中的LSA区域ID.
LsdbType:在LSDB中的LSA类型.
LsdbLsId:在LSDB中的LSAID.
LsdbRouterId:在LSDB中的路由器ID.
","1.
正常运行信息,无需处理.
""TRAP_LSDB_APP_OFLOW","ADD_NBR_PRLIST_VLINK","NotifyLSDBapproachingoverflow.
(ProcessId=[USHORT],RouterId=[IPADDR],ExtLsdbLimit=[ULONG])","6","通知LSDB将要溢出.
","ProcessId:OSPF进程号.
RouterId:路由器ID.
ExtLsdbLimit:扩展链路状态数据库限制.
","OSPF/6/TRAP_LSDB_OVERFLOW","ProcessId:OSPF进程号.
RouterId:路由器ID.
ExtLsdbLimit:扩展链路状态数据库限制.
","CFM/4/RST_CFG""TRAP_LSDB_OVERFLOW","ADD_NBR_PRLIST_VLINK","NotifyLSDBoverflow.
(ProcessId=[USHORT],RouterId=[IPADDR],ExtLsdbLimit=[ULONG])","6","通知LSDB溢出.
","OSPF/6/TRAP_NBR_CHG","OSPF/6/TRAP_LSDB_OVERFLOW","OSPF/6/TRAP_NBR_CHG","CFM/4/RST_CFG""TRAP_NBR_CHG","ADD_NBR_PRLIST_VLINK","Neighborstatehaschanged.
(ProcessId=[USHORT],RouterId=[IPADDR],NeighborIpAddress=[IPADDR],NeighborAddressLessIndex=[ULONG],NeighborRouterId=[IPADDR],NeighborState=[ULONG])","6","ProcessId:OSPF进程号.
RouterId:路由器ID.
NeighborIpAddress:邻居IP地址.
NeighborAddressLessIndex:邻居地址索引号.
NeighborRouterId:邻居路由器ID.
NeighborState:邻居状态.
","[peer-address]:BGP对等体的IP地址.
[previous-state]:前一状态.
[current-state]:当前状态.
BgpAddressFamily:地址族名称.
","OSPF/6/TRAP_NSSA_TRANS_CHG","[peer-address]:BGP对等体的IP地址.
[previous-state]:前一状态.
[current-state]:当前状态.
BgpAddressFamily:地址族名称.
","1.
正常运行信息,无需处理.
""TRAP_NSSA_TRANS_CHG","ADD_NBR_PRLIST_VLINK","NotifythechangeinNSSAtranslatorrole.
(ProcessId=[USHORT],RouterId=[IPADDR],AreaId=[IPADDR],NssaTranslatorState=[ULONG])","6","通知NSSA转换角色改变.
","ProcessId:OSPF进程号.
RouterId:路由器ID.
AreaId:区域ID.
NssaTranslatorState:NSSA角色转化原因.
","OSPF/6/TRAP_ORG_LSA","ProcessId:OSPF进程号.
RouterId:路由器ID.
AreaId:区域ID.
NssaTranslatorState:NSSA角色转化原因.
","1.
正常运行信息,无需处理.
""TRAP_ORG_LSA","ADD_NBR_PRLIST_VLINK","RouteroriginatingLSA.
(ProcessId=[USHORT],RouterId=[IPADDR],LsdbAreaId=[IPADDR],LsdbType=[ULONG],LsdbLsId=[IPADDR],LsdbRouterId=[IPADDR])","6","路由器产生LSA.
","ProcessId:OSPF进程号.
RouterId:路由器ID.
LsdbAreaId:LSDB区域ID.
LsdbType:LSDB类型.
LsdbLsId:LSAID.
LsdbRouterId:LSDB路由器ID.
","OSPF/6/TRAP_RESTART_CHG","ProcessId:OSPF进程号.
RouterId:路由器ID.
LsdbAreaId:LSDB区域ID.
LsdbType:LSDB类型.
LsdbLsId:LSAID.
LsdbRouterId:LSDB路由器ID.
","1.
正常运行信息,无需处理.
""TRAP_RESTART_CHG","ADD_NBR_PRLIST_VLINK","Notifythechangeinrestart.
(ProcessId=[USHORT],RouterId=[IPADDR],RestartStatus=[ULONG],RestartInterval=[ULONG],RestartExitReason=[ULONG])","6","通知平滑重启状态改变.
","ProcessId:OSPF进程号.
RouterId:路由器ID.
RestartStatus:GR状态.
RestartInterval:GR时间间隔.
RestartExitReason:退出GR原因.
","OSPF/4/TRAP_VIF_AUTH_FAIL","ProcessId:OSPF进程号.
RouterId:路由器ID.
RestartStatus:GR状态.
RestartInterval:GR时间间隔.
RestartExitReason:退出GR原因.
","1.
正常运行信息,无需处理.
""TRAP_VIF_AUTH_FAIL","ADD_NBR_PRLIST_VLINK","Virtualinterfaceauthenticationhasfailed.
(ProcessId=[USHORT],RouterId=[IPADDR],Area=[IPADDR],Neighbor=[IPADDR],ErrorType=[ULONG],PacketType=[ULONG])","4","虚接口验证失败.
","ProcessId:OSPF进程号.
RouterId:路由器ID.
Area:区域ID.
Neighbor:邻居地址.
ErrorType:错误类型.
PacketType:报文类型.
","1.
执行displayospfinterface命令,检查此接口与邻居路由器的验证相关配置.
1)配置正确,则=>正常运行信息,无需处理.
2)配置错误,修改后如果还出现该日志,则=>2.
2.
请联系华为技术支持工程师.
","ProcessId:OSPF进程号.
RouterId:路由器ID.
Area:区域ID.
Neighbor:邻居地址.
ErrorType:错误类型.
PacketType:报文类型.
","OSPF/4/TRAP_VIF_CFG_ERR""TRAP_VIF_CFG_ERR","ADD_NBR_PRLIST_VLINK","Virtualinterfaceconfigurationerrorhasoccurred.
(ProcessId=[USHORT],RouterId=[IPADDR],Area=[IPADDR],Neighbor=[IPADDR],ErrorType=[ULONG],PacketType=[ULONG])","4","虚接口配置错误.
","1.
执行displayospfvlink命令,检查虚连接接口的配置.
1)配置正确,则=>正常运行信息,无需处理.
2)配置错误,修改后如果还出现该日志,则=>2.
2.
请联系华为技术支持工程师.
","1.
执行displayospfinterface命令,检查此接口与邻居路由器的验证相关配置.
1)配置正确,则=>正常运行信息,无需处理.
2)配置错误,修改后如果还出现该日志,则=>2.
2.
请联系华为技术支持工程师.
","1.
执行displayospfvlink命令,检查虚连接接口的配置.
1)配置正确,则=>正常运行信息,无需处理.
2)配置错误,修改后如果还出现该日志,则=>2.
2.
请联系华为技术支持工程师.
","OSPF/6/TRAP_VIF_RX_BAD""TRAP_VIF_RX_BAD","ADD_NBR_PRLIST_VLINK","Virtualinterfacereceivedbadpacket.
(ProcessId=[USHORT],RouterId=[IPADDR],Area=[IPADDR],Neighbor=[IPADDR],PacketType=[ULONG])","6","虚接口收到错误报文.
","ProcessId:OSPF进程号.
RouterId:路由器ID.
Area:区域ID.
Neighbor:邻居地址.
PacketType:报文类型.
","OSPF/6/TRAP_VIR_HELPER_CHG","ProcessId:OSPF进程号.
RouterId:路由器ID.
Area:区域ID.
Neighbor:邻居地址.
PacketType:报文类型.
","OSPF/4/TRAP_INTF_CFG_ERR""TRAP_VIR_HELPER_CHG","ADD_NBR_PRLIST_VLINK","Notifythechangeinvirtualneighborrestarthelper.
(ProcessId=[USHORT],RouterId=[IPADDR],VirtualNeighborArea=[IPADDR],VirtualNeighborRouterId=[IPADDR],VirtualNeighborRestartHelperStatus=[ULONG],VirtualNeighborRestartHelperAge=[ULONG],VirtualNeighborRestartHelperExitReason=[ULONG])","6","ProcessId:OSPF进程号.
RouterId:路由器ID.
VirtualNeighborArea:虚连接邻居区域ID.
VirtualNeighborRouterId:虚连接邻居路由器ID.
VirtualNeighborRestartHelperStatus:虚连接邻居GR状态.
VirtualNeighborRestartHelperAge:虚连接邻居GR时间.
VirtualNeighborRestartHelperExitReason:虚连接邻居退出GR的原因.
","[peer-address]:BGP对等体的IP地址.
[previous-state]:前一状态.
[current-state]:当前状态.
BgpAddressFamily:地址族名称.
","链路状态改变.
","OSPF/6/TRAP_VIR_INTF_CHG","1.
正常运行信息,无需处理.
""TRAP_VIR_INTF_CHG","ADD_NBR_PRLIST_VLINK","Virtualinterfacestatehaschanged.
(ProcessId=[USHORT],RouterId=[IPADDR],AreaId=[IPADDR],NeighborId=[IPADDR],InterfaceState=[ULONG])","6","虚接口状态改变.
","ProcessId:OSPF进程号.
RouterId:路由器ID.
AreaId:区域号.
NeighborId:邻居路由器ID.
InterfaceState:接口状态.
","OSPF/6/TRAP_VIR_INTF_RETX","ProcessId:OSPF进程号.
RouterId:路由器ID.
AreaId:区域号.
NeighborId:邻居路由器ID.
InterfaceState:接口状态.
","1.
正常运行信息,无需处理.
""TRAP_VIR_INTF_RETX","ADD_NBR_PRLIST_VLINK","Virtualinterfacehasretransmitted.
(ProcessId=[USHORT],RouterId=[IPADDR],Area=[IPADDR],Neighbor=[IPADDR],PacketType=[ULONG],LsdbAreaId=[IPADDR],LsdbType=[ULONG],LsdbLsId=[IPADDR],LsdbRouterId=[IPADDR])","6","虚接口重传报文.
","ProcessId:OSPF进程号.
RouterId:路由器ID.
Area:区域ID.
Neighbor:邻居地址.
PacketType:报文类型.
LsdbAreaId:在LSDB中的LSA区域ID.
LsdbType:在LSDB中的LSA类型.
LsdbLsId:在LSDB中的LSAID.
LsdbRouterId:在LSDB中的路由器ID.
","OSPF/6/TRAP_VIR_NBR_CHG","ProcessId:OSPF进程号.
RouterId:路由器ID.
Area:区域ID.
Neighbor:邻居地址.
PacketType:报文类型.
LsdbAreaId:在LSDB中的LSA区域ID.
LsdbType:在LSDB中的LSA类型.
LsdbLsId:在LSDB中的LSAID.
LsdbRouterId:在LSDB中的路由器ID.
","1.
正常运行信息,无需处理.
""TRAP_VIR_NBR_CHG","ADD_NBR_PRLIST_VLINK","Virtualneighborstatehaschanged.
(ProcessId=[USHORT],RouterId=[IPADDR],Area=[IPADDR],VirtualNeighborRouterId=[IPADDR],VirtualNeighborState=[ULONG])","6","虚邻居状态改变.
","ProcessId:OSPF进程号.
RouterId:路由器ID.
Area:区域ID.
VirtualNeighborRouterId:虚邻居IP地址.
VirtualNeighborState:虚邻居状态.
","OSPF/4/UPLAN_MATCH_HLPFAIL","ProcessId:OSPF进程号.
RouterId:路由器ID.
Area:区域ID.
VirtualNeighborRouterId:虚邻居IP地址.
VirtualNeighborState:虚邻居状态.
","1.
正常运行信息,无需处理.
""UPLAN_MATCH_HLPFAIL","ADD_NBR_PRLIST_VLINK","OSPF[process-id]cannotenterhelper,unplannedconfigurationmismatchwithrestartpeer[interface-name].
","4","Helper模式与restarter发送的graceLSA中的配置不匹配,进入helper模式失败.
","HelperGR配置与收到的gracelsa携带信息不匹配,不能进入Helper模式","HelperGR配置与收到的gracelsa携带信息邻居ID不匹配,不能进入Helper模式.
","OSPF/6/VLINK_IF_CHG_E","1.
正常运行信息,无需处理.
""VLINK_IF_CHG_E","ADD_NBR_PRLIST_VLINK","Virtuallinkinterface[vlink-interface-address]receivedevent[interface-event],interfacestatechangedfrom[interface-previous-state]to[interface-current-state].
(ProcessId=[USHORT])","6","虚连接接口状态改变.
","[vlink-interface-address]:虚连接接口地址.
[interface-event]:事件.
[interface-previous-state]:接口先前状态.
[interface-current-state]:接口当前状态.
ProcessId:进程号.
","OSPF/3/VLINK_NBR_CHG_DOWN","[vlink-interface-address]:虚连接接口地址.
[interface-event]:事件.
[interface-previous-state]:接口先前状态.
[interface-current-state]:接口当前状态.
ProcessId:进程号.
","OSPF/6/IF_TYPE_CHG""VLINK_NBR_CHG_DOWN","ADD_NBR_PRLIST_VLINK","Virtuallinkpeerevent:neighborstatechangedtoDown.
(ProcessId=[USHORT],NeighborAddress=[IPADDR],NeighborEvent=[STRING],NeighborPreviousState=[STRING],NeighborCurrentState=[STRING])","3","OSPF/4/VLINK_NBR_CHG_E","ProcessId:进程号.
NeighborAddress:邻居地址.
NeighborEvent:邻居触发的事件.
NeighborPreviousState:邻居变化前的状态.
NeighborCurrentState:邻居变化后的状态.
","邻居状态因为收到OSPF的报文或是影响OSPF邻居关系的操作,邻居状态发生迁移.
","OSPF/6/SMB_GETSESSION_ERR","1.

正常运行信息,无需处理.
""VLINK_NBR_CHG_E","ADD_NBR_PRLIST_VLINK","Virtuallinkpeerevent:neighborstatuschanged.
(ProcessId=[USHORT],VirtualLinkNeighborAddress=[IPADDR],NeighborEvent=[STRING],NeighborPreviousState=[STRING],NeighborCurrentState=[STRING])","4","虚连接邻居状态改变.
","ProcessId:进程号.
VirtualLinkNeighborAddress:虚连接邻居地址.
NeighborEvent:收到事件.
NeighborPreviousState:邻居变化前的状态.
NeighborCurrentState:邻居变化后的状态.
","OSPFV3/3/GRBCKLNKERR","ProcessId:进程号.
VirtualLinkNeighborAddress:虚连接邻居地址.
NeighborEvent:收到事件.
NeighborPreviousState:邻居变化前的状态.
NeighborCurrentState:邻居变化后的状态.
","OSPF/3/SHAMLINK_NBR_DOWN""OSPFV3","GRBCKLNKERR","ThereisnolinktorestartingrouterinthereceivedLSA,soprematurelyexitgracefulrestartandresetOSPFv3[ULONG]process.
","3","新LSA里没有指向GR设备的连接,退出GR.
","[ULONG]:进程号.
","新LSA里没有指向GR设备的连接,提前退出平滑启动并普通重启进程.
","OSPFV3/3/GRFLLALLNBRERR","1.
正常运行信息,无需处理.
""GRFLLALLNBRERR","GRBCKLNKERR","OSPFv3[ULONG]restartingrouterisfullwithalltheneighbors,henceexitinggracefulrestart.
","3","和所有邻居建立邻居状态,退出GR.
","在平滑启动进程中,和所有邻居状态已经建立.
","新LSA里没有指向GR设备的连接,提前退出平滑启动并普通重启进程.
","OSPFV3/3/GRINTFDWNERR","1.

正常运行信息,无需处理.
""GRINTFDWNERR","GRBCKLNKERR","Interface[STRING]statechangedinrestartingrouter,soprematurelyexitgracefulrestartandresetOSPFv3[ULONG]process.
","3","在GR期间接口down.
","[STRING]:进程号.
[ULONG]:接口名称.
","在平滑启动过程中,接口down,提前退出平滑启动并普通重启进程.
","OSPFV3/6/GRNOHLPCNFG","1.
正常运行信息,无需处理.
""GRNOHLPCNFG","GRBCKLNKERR","OSPFv3[ULONG]helperisnotconfigured.
","6","没有配置帮助者角色.
","OSPFV3/3/GRNORMALRSTERR","新LSA里没有指向GR设备的连接,提前退出平滑启动并普通重启进程.
","OSPFV3/3/GRNORMALRSTERR","1.

正常运行信息,无需处理.
""GRNORMALRSTERR","GRBCKLNKERR","ExitedfromgracefulrestartbecausenormalresetisexecutedonOSPFv3process[ULONG].
","3","普通复位已完成,退出GR.
","平滑启动过程中,设置了普通重启,提前结束平滑启动,普通重启进程.
","新LSA里没有指向GR设备的连接,提前退出平滑启动并普通重启进程.
","OSPFV3/6/GRNOTENBL","1.

正常运行信息,无需处理.
""GRNOTENBL","GRBCKLNKERR","OSPFv3[ULONG]gracefulrestartisnotenabled.
","6","平滑启动功能没有使能.
","平滑启动功能没有配置.
","新LSA里没有指向GR设备的连接,提前退出平滑启动并普通重启进程.
","1.

配置平滑启动并执行resetospfv3命令重新启动OSPFv3协议.
","OSPFV3/3/GRPRDEXPERR""GRPRDEXPERR","GRBCKLNKERR","OSPFv3[ULONG]graceperiodtimerexpired.
","3","GR周期超时.
","OSPFv3进程平滑启动周期超时.
","新LSA里没有指向GR设备的连接,提前退出平滑启动并普通重启进程.
","OSPFV3/3/GRPROCDELERR","1.

正常运行信息,无需处理.
""GRPROCDELERR","GRBCKLNKERR","ExitedfromgracefulrestartbecauseOSPFv3process[ULONG]isdeleted.
","3","GR进程被删除,退出GR.
","平滑启动进程中,OSPFv3进程被删除,提前结束平滑启动,并普通重启OSPFv3进程.
","新LSA里没有指向GR设备的连接,提前退出平滑启动并普通重启进程.
","OSPFV3/3/GRSLFORGNTWKMSSERR","1.

正常运行信息,无需处理.
""GRSLFORGNTWKMSSERR","GRBCKLNKERR","ExitedgracefulrestartasselforiginatedNetwork-LSAswerenotreceivedfromtheneighbor[STRING]oninterface[STRING]duringdatabasesynchronizationforOSPFv3process[ULONG].
","3","DatabaseDescription报文交换期间从邻居[STRING]没有收到自产生预重启网络LSA,退出GR.
","[STRING]:邻居路由器ID.
[STRING]:接口名称.
[ULONG]:进程号.
","没有收到自产生预重启网络LSA,意味着至少一个邻居不是帮助者,提前退出平滑启动并普通重启进程.
","OSPFV3/4/HELLO_DELAY","1.
正常运行信息,无需处理.
""HELLO_DELAY","GRBCKLNKERR","Sendinghellopacketontheinterface[STRING]isdelayedmorethan3timesofthehellointerval.
","4","最后发送的报文到当前发送的报文的间隔大于Hello报文发送间隔的3倍,这表明可能发生了任务调度时延.
","OSPFV3/6/IFSMCHG","使能LDP联动.
","OSPFV3/6/IFSMCHG","1.

正常运行信息,无需处理.
""IFSMCHG","GRBCKLNKERR","Interface[interface-name]statechangedfrom[old-interface-state]to[new-interface-state].
(Event=[STRING],ProcessId=[ULONG])","6","接口状态从状态1变到状态2.
","[interface-name]:接口名称.
[old-interface-state]:旧接口状态.
[new-interface-state]:新接口状态.
Event:接口事件.
ProcessId:进程号.
","接口状态机变化.
","OSPFV3/4/MAXEXTROUTESLIMIT","1.
正常运行信息,无需处理.
""MAXEXTROUTESLIMIT","GRBCKLNKERR","OSPFv3[ULONG]externalrouteadditionisunsuccessfulduetomaximumlimit.
","4","达到可配置的最大外部路由数.
","1.
更改设备的PAF/LCS或减少路由.
","新LSA里没有指向GR设备的连接,提前退出平滑启动并普通重启进程.
","1.
更改设备的PAF/LCS或减少路由.
","OSPFV3/4/MEMSHORT""MEMSHORT","GRBCKLNKERR","Receivedmemoryshortagenotificationfrommemorymanagement.
","4","从内存管理模块收到内存不足通告.
","内存短缺.
","无:无","OSPFV3/6/NFSMCHG","IFNET/5/ACOAM_STATE_CHANGE""NFSMCHG","GRBCKLNKERR","Neighborstatechangedfrom[neighbor-old]to[neighbor-new].
(Event=[STRING],RouterId=[STRING],Interface=[STRING],ProcessId=[ULONG])","6","邻居状态从状态1变到状态2.
","[neighbor-old]:邻居旧状态.
[neighbor-new]:邻居新状态.
Event:邻居事件.
RouterId:邻居路由器ID.
Interface:到邻居的接口.
ProcessId:进程号.
","邻居状态机变化.
","OSPFV3/4/PROC_UP_FAIL_MEMSHT","1.
正常运行信息,无需处理.
""PROC_UP_FAIL_MEMSHT","GRBCKLNKERR","OSPFv3[ULONG]processcannotcomeupduetomemoryshortage.
","4","由于内存不足,进程无法Up.
","[ULONG]:进程ID.
","由于内存不足,进程无法启动.
","OSPFV3/6/PROCUNDRGR","1.
正常运行信息,无需处理.
""PROCUNDRGR","GRBCKLNKERR","OSPFv3[ULONG]processisundergoingreset.
","6","进程正在复位.
","平滑启动保持定时器超时时,进程正在平滑启动.
","新LSA里没有指向GR设备的连接,提前退出平滑启动并普通重启进程.
","OSPFV3/4/RMMEMRESTR","1.

正常运行信息,无需处理.
""RMMEMRESTR","GRBCKLNKERR","ReceivedmemoryrestorenotificationfromRM.
","4","从路由管理收到内存恢复通告.
","内存短缺恢复.
","无:无","OSPFV3/4/RMMEMSHORT","IFNET/5/ACOAM_STATE_CHANGE""RMMEMSHORT","GRBCKLNKERR","ReceivedmemoryshortagenotificationfromRM.
","4","从路由管理收到内存不足通告.
","PAF/6/LCS_NOT_SAME","无:无","OSPFV3/6/NFSMCHG","IFNET/5/ACOAM_STATE_CHANGE""PAF","LCS_NOT_SAME","Thelicensefileonthisboardisnotthesameasthatonthesystemmaincontrolboard.
","6","本板上的license文件与系统主控板上的不一致.
","PAF/6/PAF_NOT_SAME","无:无","PAF/6/PAF_NOT_SAME","1.
正常运行信息,无需处理.
""PAF_NOT_SAME","LCS_NOT_SAME","ThePAFfileonthisboardisnotthesameasthatonthesystemmaincontrolboard.
","6","本板上的PAF文件与系统主控板上的不一致.
","PAF/4/READLCSFAIL","无:无","PAF/4/READLCSFAIL","1.
正常运行信息,无需处理.
""READLCSFAIL","LCS_NOT_SAME","FailedtoreadLicensefilewheninitializingLCS.
(ErrorCode=[LONG])","4","初始化LCS时,读LCS文件失败.
","ErrorCode:错误码.
具体情况如下1.
-5参数错误.
2.
-3指针不合法.
3.
-4打开方式不正确.
4.
-2句柄不合法.
","1.
运行dirlicense.
txt查看license.
txt是否存在以及该文件的长度,如果存在且长度大于零,运行copylicense.
txtslave#flash:/,将license.
txt复制到备板后,整机重启.
","ErrorCode:错误码.
具体情况如下1.
-5参数错误.
2.
-3指针不合法.
3.
-4打开方式不正确.
4.
-2句柄不合法.
","PAF/4/READPAFFAIL""READPAFFAIL","LCS_NOT_SAME","FailedtoreadPAFfilewheninitializingPAF.
(ErrorCode=[LONG])","4","初始化PAF时,读PAF文件失败.
","1.
运行dirpaf.
txt查看paf.
txt是否存在以及该文件的长度,如果存在且长度大于零,运行copypaf.
txtslave#flash:/,将paf.
txt复制到备板后,整机重启.
","1.
运行dirlicense.
txt查看license.
txt是否存在以及该文件的长度,如果存在且长度大于零,运行copylicense.
txtslave#flash:/,将license.
txt复制到备板后,整机重启.
","1.
运行dirpaf.
txt查看paf.
txt是否存在以及该文件的长度,如果存在且长度大于零,运行copypaf.
txtslave#flash:/,将paf.
txt复制到备板后,整机重启.
","PAF/5/WRITE_LCS_FAIL""WRITE_LCS_FAIL","LCS_NOT_SAME","FailedtowriteLicensefilewhensynchronizingtheLicensefilefromthetargetmaincontrolboard.
","Whenbeingaskedwhethertocommitthecommand"undobulk-statenable",theuserchoseN.
","从目标主控板同步License时,写License文件失败.
","PAF/5/WRITE_PAF_FAIL","无:无","PAF/5/WRITE_PAF_FAIL","1.
正常运行信息,无需处理.
""WRITE_PAF_FAIL","LCS_NOT_SAME","FailedtowritePAFfilewhensynchronizingthePAFfilefromthetargetmaincontrolboard.
","Whenbeingaskedwhethertocommitthecommand"undobulk-statenable",theuserchoseN.
","从目标主控板同步PAF时,写PAF文件失败.
","PATCH/6/READ_FILE_FAIL","无:无","PATCH/6/READ_FILE_FAIL","1.
正常运行信息,无需处理.
""PATCH","READ_FILE_FAIL","Onslot[slot-num],readpatchfile[file-name]failed.
","6","解析补丁大包文件失败.
","[slot-num]:单板槽号[file-name]:补丁文件名","PDF/4/CLOSEPDFRFAIL","[slot-num]:单板槽号[file-name]:补丁文件名","CFM/4/RST_CFG""PDF","CLOSEPDFRFAIL","FailedtoclosePDFfilewhenreadingprivatedata.
","4","关闭PDF文件失败.
","PDF/4/CLOSEPDFWFAIL","无:无","PDF/4/CLOSEPDFWFAIL","1.
正常运行信息,无需处理.
""CLOSEPDFWFAIL","CLOSEPDFRFAIL","FailedtoclosePDFfilewhenwritingprivatedata.
","4","PDF/4/DOPOPFAIL","PDF/4/CLOSEPDFWFAIL","无:无","PDF/4/CLOSEPDFWFAIL","1.
正常运行信息,无需处理.
""DOPOPFAIL","CLOSEPDFRFAIL","FailedtodoPoperationwhenwritingcurrentdatatoflash.
","4","准备把数据写入FLASH时,从数据区取数据失败.
","进行P操作保护资源失败.
","无:无","PDF/4/OPENPDFRFAIL","1.
正常运行信息,无需处理.
""OPENPDFRFAIL","CLOSEPDFRFAIL","FailedtoopenPDFfileinbinaryreadmodewhenreadingprivatedata.
","4","以二进制读方式打开PDF文件失败.
","PDF/4/OPENPDFWFAIL","无:无","PDF/4/OPENPDFWFAIL","1.
正常运行信息,无需处理.
""OPENPDFWFAIL","CLOSEPDFRFAIL","FailedtoopenPDFfileinbinarywritemodewhenwritingprivatedata.
","4","以二进制写方式打开PDF文件失败.
","PDF/4/READPDFFAIL","无:无","PDF/4/READPDFFAIL","1.
正常运行信息,无需处理.
""READPDFFAIL","CLOSEPDFRFAIL","FailedtoreadPDFfilewhenreadingprivatedata.
","4","读PDF文件失败.
","PDF/4/SEEKPDFRFAIL","无:无","PDF/4/SEEKPDFRFAIL","1.
正常运行信息,无需处理.
""SEEKPDFRFAIL","CLOSEPDFRFAIL","FailedtoseekthePDFfileheaderwhenreadingprivatedata.
","4","跳到PDF文件首失败.
","PDF/4/SEEKPDFWFAIL","无:无","PDF/4/SEEKPDFWFAIL","1.
正常运行信息,无需处理.
""SEEKPDFWFAIL","CLOSEPDFRFAIL","FailedtoseekthePDFfileheaderwhenwritingprivatedata.
","4","PDF/4/WRITEFAIL","PDF/4/SEEKPDFWFAIL","无:无","PDF/4/SEEKPDFWFAIL","1.
正常运行信息,无需处理.
""WRITEFAIL","CLOSEPDFRFAIL","FailedtowritePDFfilewhenwritingcurrentdatatoflash.
","4","准备把数据写入FLASH时,写PDF文件失败.
","PDF/4/WRITEPDFFAIL","无:无","PDF/4/WRITEPDFFAIL","1.
正常运行信息,无需处理.
""WRITEPDFFAIL","CLOSEPDFRFAIL","FailedtowritePDFfilewhenwritingprivatedata.
","4","写PDF文件失败.
","PDF/4/WRITEPDFNOSPACE","无:无","PDF/4/WRITEPDFNOSPACE","1.
正常运行信息,无需处理.
""WRITEPDFNOSPACE","CLOSEPDFRFAIL","FailedtowritePDFfilebecausethestoragespaceisnotenough.
(FreeSpace=[STRING]Bytes,FileLength=[STRING]Bytes)","4","更新PDF文件时,存储设备剩余空间不足,导致更新操作失败.
","FreeSpace:剩余空间.
FileLength:文件长度.
","存储设备剩余空间小于PDF文件大小时,进行更新PDF文件的操作.
","1.
进入设备目录.
2.
用dir命令查看存储设备剩余空间的大小.
如果剩余空间不足,则用delete命令删除无用的多余文件.
3.
用dir命令查看存储设备剩余空间是否大于PDF文件大小.
1).
Y=>5.
2).
N=>4.
4.
请联系华为技术支持工程师.
5.
结束.
","PDF/4/WRITESLAVEFAIL""WRITESLAVEFAIL","CLOSEPDFRFAIL","FailedtowritePDFfileintheslaveboardwhenwritingcurrentdatatoflash.
","4","准备把数据写入备板FLASH时,写PDF文件失败.
","PHY/4/NOSFP","无:无","PHY/4/NOSFP","1.
正常运行信息,无需处理.
""PHY","NOSFP","[interface-name]SFP/SFP+isn'tpresent","4","某接口的光模块不在位.
","interface-name:接口名称","光模块被拔出.
","PHY/5/SFP","1.
正常运行信息,无需处理.
""SFP","NOSFP","[interface-name]SFP/SFP+ispresent","Whenbeingaskedwhethertocommitthecommand"undobulk-statenable",theuserchoseN.
","某接口的光模块在位.
","光模块被插入.
","光模块被拔出.
","PHY/3/SFPHIGH","1.
正常运行信息,无需处理.
""SFPHIGH","NOSFP","[interface-name]Thepossiblecauseis:theinputpowerwasbeyondthehigherthreshold.
","3","光接口输入功率高于阈值.
","光纤或光模块异常.
","光模块被拔出.
","1.
光接口输入功率高于阈值可能造成接口状态无法Up.
检查光模块的额定传输距离是否符合实际情况.
","PHY/5/SFPHIGHPOWER""SFPHIGHPOWER","NOSFP","[interface-name]Thewarningthattheinputpowerwasbeyondthehigherthresholdisresume.
","Whenbeingaskedwhethertocommitthecommand"undobulk-statenable",theuserchoseN.
","光接口输入功率从高于高阈值恢复正常.
","PHY/3/SFPLOW","光模块被拔出.
","PHY/3/SFPLOW","1.
正常运行信息,无需处理.
""SFPLOW","NOSFP","[interface-name]Thepossiblecauseis:theinputpowerwasbelowthelowerthreshold.
","3","光接口输入功率低于阈值.
","1.
光接口输入功率低于阈值可能造成接口状态无法Up.
检查光模块的额定传输距离是否符合实际情况,及光纤老化或磨损情况.
","光模块被拔出.
","1.
光接口输入功率高于阈值可能造成接口状态无法Up.
检查光模块的额定传输距离是否符合实际情况.
","PHY/5/SFPLOWPOWER""SFPLOWPOWER","NOSFP","[interface-name]Thewarningthattheinputpowerwasbelowthelowerthresholdisresume.
","Whenbeingaskedwhethertocommitthecommand"undobulk-statenable",theuserchoseN.
","光接口输入功率从低于低阈值恢复正常.
","PHY/4/STATUSDOWN","光模块被拔出.
","PHY/4/STATUSDOWN","1.
正常运行信息,无需处理.
""STATUSDOWN","NOSFP","[interface-name]changedstatustodown.
","4","接口状态变为Down.
","原因1:接口线缆被拔出.
原因2:接口被人为关闭.
","光模块被拔出.
","1.
排查原因1:接口线缆被拔出.
检查接口线缆是否被拔出.
1.
是=>重新安装接口线缆.
2.
否=>2.
2.
排查原因2:接口被人为关闭.
选择,检查接口是否被人为关闭(shutdown).
1.
是=>开启接口.
2.
否=>3.
3.
请联系技术支持工程师.
","PHY/4/STATUSUP""STATUSUP","NOSFP","[interface-name]changedstatustoup.
","4","接口状态变为Up.
","原因1:重新安装接口线缆.
原因2:接口被开启.
","光模块被拔出.
","PHY/6/PACKETDROP","1.
正常运行信息,无需处理.
""PACKETDROP","NOSFP","Packetsweredroppedatthephysicallayer.
detail:PIPdroppacket.
HardwarePoolNumis[num].
","6","物理层丢包.
","num:当前空闲缓冲区可以接收包的数量.
","流量突发或者设备负荷过重.
","1.
使用displayinterface命令检查是否有流量突发的情况,若有流量突发的情况则可能出现该日志.
如果频繁出现,请检查CPU使用率是否偏高.
如果持续偏高,需要考虑扩容.
","PHY/4/PHY_CHANNEL_DOWN""PHY_CHANNEL_DOWN","NOSFP","Channel[channel-name]changestatustodown.
","4","通道状态变为down.
","channel-name:通道名称","物理接口down.
","1.
确认接口是否输入了命令shutdown.
·是=>2.
·否=>3.
2.
正常情况,无需处理.
3.
检查物理链路是否正常.
4.
请联系华为技术支持工程师.
","PHY/5/PHY_CHANNEL_UP""PHY_CHANNEL_UP","NOSFP","Channel[channel-name]changestatustoup.
","Whenbeingaskedwhethertocommitthecommand"undobulk-statenable",theuserchoseN.
","通道状态变为up.
","物理接口up.
","物理接口down.
","PHY/6/PHY_CON_CHANGEUP","1.
正常运行信息,无需处理.
""PHY_CON_CHANGEUP","NOSFP","Controller[interface-name]changestatustoup.
","6","接口状态变为up.
","interface-name:接口名","PIC卡配置恢复完成.
","PHY/2/PHY_DETECT_FIFO","1.
正常运行信息,无需处理.
""PHY_DETECT_FIFO","NOSFP","[interface-name]FIFOdeadisdetecting.
","2","PIC卡某接口的FIF0死锁.
","SPI4FIFO死锁.
","PIC卡配置恢复完成.
","1.
检查单板物理状态.
2.
通知研发人员查看此问题.
","PHY/4/PHY_FLOW_MODE""PHY_FLOW_MODE","NOSFP","[interface-name]alreadyinflowmode.
","4","某接口物理变为交互模式.
","命令行设置.
","PIC卡配置恢复完成.
","PHY/6/PHY_INT_UNSUPPORT","1.
正常运行信息,无需处理.
""PHY_INT_UNSUPPORT","NOSFP","Interface[interface-name]can'tsupportthiscommand.
","6","某接口不支持这个命令.
","不支持命令或者设置失败.
","PIC卡配置恢复完成.
","1.
依据命令行提示信息处理.
","PHY/7/PHY_NOT_REPLYMSG""PHY_NOT_REPLYMSG","NOSFP","[module-name]unabletocreateReplyMsg.
","TherequestofreleasingGQ'sresourceisinvalid.
(Position:PrivateSlot=[slot-id],Direction=[direction];Releaser:ModuleId=0x[moduleid];Expected:GqIdNumber=[expected-gqidnumber];Hold:GqIdNumber=[hold-gqidnumber])","申请应答信息时失败.
","module-name:模块名","创建应答消息失败.
","1.
一次失败无需处理,多次失败联系华为工程师处理.
","PHY/3/PHY_OPEN_FAIL""PHY_OPEN_FAIL","NOSFP","[interface-name]openfailed.
","3","打开端口失败.
","PHY/5/PHY_OPTICAL","PIC卡配置恢复完成.
","PHY/5/PHY_OPTICAL","PHY/4/PHY_FLOW_MODE""PHY_OPTICAL","NOSFP","Thebarcodeoftheopticalmoduleconnectedtothephysicalinterface[interface-name]is[bar-code].
","Whenbeingaskedwhethertocommitthecommand"undobulk-statenable",theuserchoseN.
","插入光模块时自动将条形码记录到诊断日志.
","interface-name:接口名bar-code:光模块条形码","插光模块到物理接口.
","PHY/4/PHY_STATUS_DOWN","1.
正常运行信息,无需处理.
""PHY_STATUS_DOWN","NOSFP","某接口物理状态变为down.
","4","接口状态变为Down.
","·接口视图下执行了shutdown命令.
·物理链路问题.
·光模块故障.
","PIC卡配置恢复完成.
","1.
在接口视图下执行命令undoshutdown,检查接口物理状态是否恢复正常.
·是=>结束.
·否=>2.
2.
检查物理链路是否正常.
·是=>4.
·否=>3.
3.
更换链路,检查接口物理状态是否恢复正常.
·是=>结束.
·否=>4.
4.
更换光模块,检查接口物理状态是否恢复正常.
·是=>结束.
·否=>5.
5.
请联系技术支持工程师.
","PHY/4/PHY_STATUS_DOWN2UP""PHY_STATUS_DOWN2UP","NOSFP","Thestatusof[interface-name]changeup[bandwidth].
","4","某接口物理状态变为up.
","interface-name:接口名bandwidth:接口带宽","·接口物理状态原来为down,执行命令undoshutdown后变为up.
·接口配置自协商,协商成功后变为up.
·接口插入双绞线或光纤,协商成功后变为up.
","PHY/4/PHY_STATUS_UP","1.
正常运行信息,无需处理.
""PHY_STATUS_UP","NOSFP","物理接口状态变为up.
","4","接口状态变为Up.
","interface-name:接口名bandwidth:接口带宽","PIC卡配置恢复完成.
","PHY/4/PHY_STATUS_UP2DOWN","1.
正常运行信息,无需处理.
""PHY_STATUS_UP2DOWN","NOSFP","[interface-name]changestatustodown.
[reason-for-down]","4","interface-name:接口名reason-for-down:接口物理状态变为down的原因","·接口视图下执行了shutdown命令.
·物理链路问题.
·光模块故障.
","PHY/4/PHY_TRANSCEIVER_ABSENT","1.
在接口视图下执行命令undoshutdown,检查接口物理状态是否恢复正常.
·是=>结束.
·否=>2.
2.
检查物理链路是否正常.
·是=>4.
·否=>3.
3.
更换链路,检查接口物理状态是否恢复正常.
·是=>结束.
·否=>4.
4.
更换光模块,检查接口物理状态是否恢复正常.
·是=>结束.
·否=>5.
5.
请联系技术支持工程师.
","PHY/4/PHY_STATUS_DOWN2UP""PHY_TRANSCEIVER_ABSENT","NOSFP","[interface-name]Transceiverisabsent.
","4","光模块不在位.
","interface-name:光模块所在的物理接口名称","物理接口上的光模块被拔出.
","1.
确认是否要拔出此光模块.
·是=>2.
·否=>3.
2.
正常运行信息,无需处理.
3.
确保光模块插入完好,检查是否有PHY/4/PHY_TRANSCEIVER_PRESENT日志产生.
·是=>结束.
·否=>4.
4.
请收集告警信息、日志信息和配置信息,联系技术支持工程师进行处理.
","PHY/4/PHY_TRANSCEIVER_PRESENT""PHY_TRANSCEIVER_PRESENT","NOSFP","[interface-name]Transceiverispresent.
","4","光模块在位.
","物理接口上的光模块插入.
","物理接口上的光模块被拔出.
","PHY/5/PHY_PORTMODE_CHANGE","1.

正常运行信息,无需处理.
""PHY_PORTMODE_CHANGE","NOSFP","Theworkmodeofinterface[interface-name]changedfrom[pre-working-mode]to[current-working-mode].
","Whenbeingaskedwhethertocommitthecommand"undobulk-statenable",theuserchoseN.
","10GE接口的工作模式发生切换.
","interface-name:接口名pre-working-mode:接口原来的工作模式current-working-mode:接口当前工作模式","原因1:物理接口上插入了GE光模块.
原因2:物理接口上GE光模块被拔出.
原因3:使用speed、duplex、negotiation、port-type命令设置了10GE接口的工作模式.
","PHY/5/PHY_PORTTYPE_COPPER","1.

正常运行信息,无需处理.
""PHY_PORTTYPE_COPPER","NOSFP","[interface-name]port'stypewasconfiguredascopper.
","Whenbeingaskedwhethertocommitthecommand"undobulk-statenable",theuserchoseN.
","某接口被强制设置为电口.
","非电模块类型的接口被强制设置为电口.
","PIC卡配置恢复完成.
","PHY/5/PHY_PORTTYPE_FE","1.

正常运行信息,无需处理.
""PHY_PORTTYPE_FE","NOSFP","[interface-name]port'stypewasconfiguredasFE.
","Whenbeingaskedwhethertocommitthecommand"undobulk-statenable",theuserchoseN.
","某接口被强制设置为百兆光口.
","非百兆光模块的接口被强制设置为百兆模式.
","PIC卡配置恢复完成.
","PHY/5/PHY_PORTTYPE_GE","1.

正常运行信息,无需处理.
""PHY_PORTTYPE_GE","NOSFP","[interface-name]port'stypewasconfiguredasGE.
","Whenbeingaskedwhethertocommitthecommand"undobulk-statenable",theuserchoseN.
","某接口被强制设置为千兆光口.
","非千兆光模块的接口被强制设置为千兆模式.
","PIC卡配置恢复完成.
","PKI/4/GETTING_CA_CERT","1.

正常运行信息,无需处理.
""PKI","GETTING_CA_CERT","Realm[realm_name]isobtainingCAcertificatethrough[protocol].
.
.
","4","正在通过SCEP协议获取CA证书.
","[realm_name]:PKI域名.
[protocol]:协议类型:SCEP.
","通过SCEP协议获取CA证书.
","PKI/4/CA_IMPORT_ERR","1.
正常运行信息,无需处理.
""CA_IMPORT_ERR","GETTING_CA_CERT","ImportingCAcertificatefile([file_name])failed.
","4","导入CA证书失败.
","[file_name]:CA证书文件名.
","手工执行命令行,导入CA证书失败.
","1.
检查导入的证书文件是否存在.
2.
检查导入的证书文件是否合法.
3.
用户视图下打开PKI模块debug开关,查看相关调试信息确定问题原因.
","PKI/4/CA_IMPORT_OK""CA_IMPORT_OK","GETTING_CA_CERT","ImportingCAcertificatefile([file_name])succeeded.
","4","导入CA证书成功.
","手工执行命令行,导入CA证书成功.
","手工执行命令行,导入CA证书失败.
","PKI/4/CA_WILL_EXPIRED","1.

正常运行信息,无需处理.
""CA_WILL_EXPIRED","GETTING_CA_CERT","CAcertificate([subject_name])willexpirein[day]days.
","4","CA证书即将过期.
","[subject_name]:CA证书的主题名.
[day]:CA证书还可以使用的天数.
","内存中的CA证书即将过期.
","1.
在有效期截止前及时更新CA证书.
","PKI/4/CA_EXPIRED""CA_EXPIRED","GETTING_CA_CERT","CAcertificate([subject_name])hasexpiredfor[day]days.
","4","CA证书已经过期.
","[subject_name]:CA证书的主题名.
[day]:CA证书过期的天数.
","内存中的CA证书已经过期.
","1.
更新CA证书.
","PKI/4/CA_VALID""CA_VALID","GETTING_CA_CERT","CAcertificate([subject_name])willbevalidin[day]days.
","4","CA证书尚未生效.
","[subject_name]:CA证书的主题名.
[day]:距离CA证书生效的天数.
","内存中的CA证书还没有生效.
","1.
检查系统时间是否正确.
","PKI/4/GETTING_CERT""GETTING_CERT","GETTING_CA_CERT","Manuallyobtainingcertificate[file_name]through[protocol].
.
.
","4","正在手工获取证书.
","[file_name]:证书文件名.
[protocol]:协议类型:LDAP,HTTP.
","手工执行命令行,获取证书.
","PKI/4/CRL_IMPORT_ERR","1.
正常运行信息,无需处理.
""CRL_IMPORT_ERR","GETTING_CA_CERT","ImportingCRLfile([file_name])failed.
","4","导入CRL失败.
","[file_name]:CRL文件名.
","手工执行命令行,导入CRL失败.
","1.
检查导入的CRL文件是否存在.
2.
检查导入的CRL文件是否合法.
3.
用户视图下打开PKI模块debug开关,查看相关调试信息确定问题原因.
","PKI/4/CRL_IMPORT_OK""CRL_IMPORT_OK","GETTING_CA_CERT","ImportingCRLfile([file_name])succeeded.
","4","导入CRL成功.
","手工执行命令行,导入CRL成功.
","手工执行命令行,导入CRL失败.
","PKI/4/CRL_WILL_EXPIRED","1.

正常运行信息,无需处理.
""CRL_WILL_EXPIRED","GETTING_CA_CERT","CRL([issuer_name])willexpirein[day]days.
","4","CRL即将过期.
","[issuer_name]:CRL的颁发者名称.
[day]:CRL还可以使用的天数.
","内存中的CRL即将过期.
","1.
在有效期截止前及时更新CRL.
","PKI/4/CRL_EXPIRED""CRL_EXPIRED","GETTING_CA_CERT","CRL([issuer_name])hasexpiredfor[day]days.
","4","CRL已经过期.
","[issuer_name]:CRL的颁发者名称.
[day]:CRL过期的天数.
","内存中的CRL已经过期.
","1.
更新CRL文件.
","PKI/4/CRL_VALID""CRL_VALID","GETTING_CA_CERT","CRL([issuer_name])willbevalidin[day]days.
","4","CRL尚未生效.
","[issuer_name]:CRL的颁发者名称.
[day]:距离CRL生效的天数.
","内存中的CRL还没有生效.
","PKI/4/CA","PKI/4/GETTING_CERT""CA","GETTING_CA_CERT","DeletingCAcertificatefile([file_name])failed.
","4","删除CA证书失败.
","[file_name]:证书文件名.
","从内存中删除CA证书失败.
","1.
查看待删除的证书是否存在.
2.
查看待删除的证书文件编码是否正确.
3.
无法确认配置问题,用户视图下打开PKI模块debug开关,查看相关调试信息确定问题原因.
","DeletingCAcertificatefile([file_name])succeeded.
""CA","GETTING_CA_CERT","DeletingCAcertificatefile([file_name])failed.
","4","删除CA证书成功.
","从内存中删除CA证书成功.
","从内存中删除CA证书失败.
","PKI/4/CRL","1.
正常运行信息,无需处理.
""CRL","GETTING_CA_CERT","DeletingCRLfile([file_name])succeeded.
","4","删除CRL成功.
","从内存中删除CRL成功.
","手工执行命令行,导入CRL失败.
","DeletingCRLfile([file_name])failed.
","1.
正常运行信息,无需处理.
""CRL","GETTING_CA_CERT","DeletingCRLfile([file_name])succeeded.
","4","删除CRL失败.
","从内存中删除CRL失败.
","手工执行命令行,导入CRL失败.
","1.
查看待删除的CRL是否存在.
2.
查看待删除的CRL文件编码是否正确.
3.
无法确认配置问题,用户视图下打开PKI模块debug开关,查看相关调试信息确定问题原因.
","PKI/4/LOCAL""LOCAL","GETTING_CA_CERT","Deletinglocalcertificatefile([file_name])failed.
","4","删除本地证书失败.
","从内存中删除本地证书失败.
","从内存中删除CA证书失败.
","Deletinglocalcertificatefile([file_name])succeeded.
","DeletingCAcertificatefile([file_name])succeeded.
""LOCAL","GETTING_CA_CERT","Deletinglocalcertificatefile([file_name])failed.
","4","删除本地证书成功.
","从内存中删除本地证书成功.
","从内存中删除CA证书失败.
","PKI/4/GET_CA_CERT_ERR","1.

正常运行信息,无需处理.
""GET_CA_CERT_ERR","GETTING_CA_CERT","Realm[realm_name]failedtogetCAcertificatethrough[protocol].
","4","通过SCEP获取CA证书失败.
","1.
用PING命令检查服务端的连接是否正常,若不正常请检查NIP基本接口域间等基本配置.
2.
若连接正常但是无法获取文件,检查PKI相关配置.
3.
无法确认配置问题,用户视图下打开PKI模块debug开关,查看相关调试信息确定问题原因.
","通过SCEP协议获取CA证书.
","1.
用PING命令检查服务端的连接是否正常,若不正常请检查NIP基本接口域间等基本配置.
2.
若连接正常但是无法获取文件,检查PKI相关配置.
3.
无法确认配置问题,用户视图下打开PKI模块debug开关,查看相关调试信息确定问题原因.
","PKI/5/GET_CA_CERT_OK""GET_CA_CERT_OK","GETTING_CA_CERT","Realm[realm_name]succeededingettingCAcertificatethrough[protocol].
","Whenbeingaskedwhethertocommitthecommand"undobulk-statenable",theuserchoseN.
","通过SCEP获取CA证书成功.
","PKI/4/GET_CERT_ERR","通过SCEP协议获取CA证书.
","PKI/4/GET_CERT_ERR","1.

正常运行信息,无需处理.
""GET_CERT_ERR","GETTING_CA_CERT","Manuallyobtainingcertificate[file_name]through[protocol]failed.
","4","手工获取证书失败.
","手工执行命令行,获取证书失败.
","手工执行命令行,获取证书.
","1.
用PING命令检查服务端的连接是否正常,若不正常请检查NIP基本接口域间等基本配置.
2.
若连接正常但是无法获取文件,检查PKI相关配置,对于HTTP协议请检查服务端文件是否正确,对于LDAP请检查属性名是否正确或对应设置属性名下得属性值是否存在.
3.
无法确认配置问题,用户视图下打开PKI模块debug开关,查看相关调试信息确定问题原因.
","PKI/5/GET_CERT_OK""GET_CERT_OK","GETTING_CA_CERT","Manuallyobtainingcertificate[file_name]through[protocol]succeeded.
","Whenbeingaskedwhethertocommitthecommand"undobulk-statenable",theuserchoseN.
","手工获取证书成功.
","手工执行命令行pkihttp或pkildap,获取证书成功.
","手工执行命令行,获取证书.
","Realm[realm_name]isgettingCRLthrough[protocol].
.
.
","1.
正常运行信息,无需处理.
""CRL","GETTING_CA_CERT","DeletingCRLfile([file_name])succeeded.
","4","域开始自动获取CRL.
","[realm_name]:PKI域名[protocol]:协议类型:LDAP,HTTP,SCEP","PKI/4/GET_CRL_ERR","[realm_name]:PKI域名[protocol]:协议类型:LDAP,HTTP,SCEP","1.
正常运行信息,无需处理.
""GET_CRL_ERR","GETTING_CA_CERT","Realm[realm_name]failedtoobtainCRLthrough[protocol].
","4","获取CRL失败.
","[realm_name]:PKI域名.
[protocol]:协议类型:LDAP,HTTP,SCEP.
","通过LDAP、HTTP或SCEP协议获取CRL失败.
","1.
用PING命令检查服务端的连接是否正常,若不正常请检查NIP基本接口域间等基本配置.
2.
若连接正常但是无法获取文件,检查PKI相关配置,对于SCEP或HTTP协议请检查服务端文件是否正确,对于LDAP请检查属性名是否正确或对应设置属性名下得属性值是否存在.
3.
无法确认配置问题,用户视图下打开PKI模块debug开关,查看相关调试信息确定问题原因.
","PKI/5/GET_CRL_OK""GET_CRL_OK","GETTING_CA_CERT","Realm[realm_name]succeededinobtainingCRLthrough[protocol].
","Whenbeingaskedwhethertocommitthecommand"undobulk-statenable",theuserchoseN.
","获取CRL成功.
","通过LDAP、HTTP或SCEP协议获取CRL成功.
","通过LDAP、HTTP或SCEP协议获取CRL失败.
","PKI/5/GET_LOCAL_CERT_OK","1.

正常运行信息,无需处理.
""GET_LOCAL_CERT_OK","GETTING_CA_CERT","Realm[realm_name]succeededingettinglocalcertificatethrough[protocol].
","Whenbeingaskedwhethertocommitthecommand"undobulk-statenable",theuserchoseN.
","通过SCEP获取本地证书成功.
","PKI/4/GET_LOCAL_CERT_ERR","通过SCEP协议获取CA证书.
","PKI/4/GET_LOCAL_CERT_ERR","1.

正常运行信息,无需处理.
""GET_LOCAL_CERT_ERR","GETTING_CA_CERT","Realm[realm_name]failedtogetlocalcertificatethrough[protocol].
","4","通过SCEP获取本地证书失败.
","PKI/4/GETTING_LOCAL_CERT","通过SCEP协议获取CA证书.
","PKI/4/GETTING_LOCAL_CERT","PKI/5/GET_CA_CERT_OK""GETTING_LOCAL_CERT","GETTING_CA_CERT","Realm[realm_name]isgettinglocalcertificatethrough[protocol].
.
.
","4","正在通过SCEP协议获取本地证书.
","通过SCEP协议获取本地证书.
","通过SCEP协议获取CA证书.
","PKI/4/LOCAL_IMPORT_ERR","1.

正常运行信息,无需处理.
""LOCAL_IMPORT_ERR","GETTING_CA_CERT","Importinglocalcertificatefile([file_name])failed.
","4","导入本地证书失败.
","[file_name]:本地证书文件名.
","手工执行命令行,导入本地证书失败.
","PKI/4/LOCAL_IMPORT_OK","PKI/4/CA_IMPORT_OK""LOCAL_IMPORT_OK","GETTING_CA_CERT","Importinglocalcertificatefile([file_name])succeeded.
","4","导入本地证书成功.
","手工执行命令行,导入本地证书成功.
","手工执行命令行,导入本地证书失败.
","PKI/4/LOCAL_WILL_EXPIRED","1.

正常运行信息,无需处理.
""LOCAL_WILL_EXPIRED","GETTING_CA_CERT","LOCALcertificate([subject_name])willexpirein[day]days.
","4","本地证书即将过期.
","[subject_name]:本地证书的主题名.
[day]:本地证书还可以使用的天数.
","内存中的本地证书即将过期.
","1.
如果通过SCEP协议向CA申请本地证书,则建议执行命令auto-enroll,自动完成后续的证书的更新,维护更方便,也能保证业务不中断.
2.
如果通过CMPv2协议向CA申请本地证书,则建议执行命令certificateauto-updateenable,自动完成后续的证书的更新,维护更方便,也能保证业务不中断.
3.
如果通过离线向CA申请本地证书,具体更新本地证书步骤如下所示.
1).
通过Web、磁盘、电子邮件等带外方式将证书申请文件发送给CA,向CA申请新的本地证书,并确保新的本地证书与旧的本地证书主体名一致.
2).
通过FTP/SFTP将新的证书上传到设备存储介质中.
3).
执行命令pkidelete-certificate,删除内存中旧的本地证书.
4).
执行命令pkiimport-certificate,将新的本地证书导入到设备内存中.
","PKI/4/LOCAL_EXPIRED""LOCAL_EXPIRED","GETTING_CA_CERT","LOCALcertificate([subject_name])hasexpiredfor[day]days.
","4","本地证书已经过期.
","[subject_name]:本地证书的主题名.
[day]:本地证书过期的天数.
","内存中的本地证书已经过期.
","1.
更新本地证书.
","PKI/4/LOCAL_VALID""LOCAL_VALID","GETTING_CA_CERT","LOCALcertificate([subject_name])willbevalidin[day]days.
","4","本地证书尚未生效.
","[subject_name]:本地证书的主题名.
[day]:距离本地证书生效的天数.
","内存中的本地证书还没有生效.
","ManuallyobtainingCRL[file_name]through[protocol]failed.
","PKI/4/GETTING_CERT""GET_CRL_ERR","GETTING_CA_CERT","Realm[realm_name]failedtoobtainCRLthrough[protocol].
","4","手工获取CRL失败.
","[file_name]:CRL文件名.
[protocol]:协议类型:LDAP,HTTP.
","手工执行命令行,获取CRL失败.
","ManuallyobtainingCRL[file_name]through[protocol]succeeded.
","PKI/5/GET_CERT_OK""GET_CRL_OK","GETTING_CA_CERT","Realm[realm_name]succeededinobtainingCRLthrough[protocol].
","Whenbeingaskedwhethertocommitthecommand"undobulk-statenable",theuserchoseN.
","手工获取CRL成功.
","手工执行命令行,获取CRL成功.
","手工执行命令行,获取CRL失败.
","ManuallyobtainingCRL[file_name]through[protocol].
.
.
","1.
正常运行信息,无需处理.
""CRL","GETTING_CA_CERT","DeletingCRLfile([file_name])succeeded.
","4","正在手工获取CRL.
","手工执行命令行,获取CRL.
","手工执行命令行,获取CRL失败.
","PKI/4/RSA_CREATE","1.

正常运行信息,无需处理.
""RSA_CREATE","GETTING_CA_CERT","RSAlocalkeypair[key_name]willbecreated.
Thekeyhas[key_bit]bits.
","4","创建RSA密钥对.
","[key_name]:RSA密钥对名称.
[key_bit]:RSA密钥对的位数.
","执行命令行pkirsalocal-key-paircreate手工创建RSA密钥对.
","PKI/4/RSA_CREATE_FAILED","1.
正常运行信息,无需处理.
""RSA_CREATE_FAILED","GETTING_CA_CERT","CreatingRSAlocalkeypair[key_name]failed.
","4","RSA密钥对创建失败.
","[key_name]:RSA密钥对名称.
","1.
用户视图下打开PKI模块debug开关,查看相关调试信息确定问题原因.
","[key_name]:RSA密钥对名称.
","PKI/4/RSA_CREATE_OK""RSA_CREATE_OK","GETTING_CA_CERT","CreatingRSAlocalkeypair[key_name]succeeded.
","4","RSA密钥对创建成功.
","PKI/4/RSA_DESTORY","1.
用户视图下打开PKI模块debug开关,查看相关调试信息确定问题原因.
","PKI/4/RSA_DESTORY","1.
正常运行信息,无需处理.
""RSA_DESTORY","GETTING_CA_CERT","RSAlocalkeypair[key_name]willbedeleted.
","4","RSA密钥对将被销毁.
","执行命令行手工销毁RSA密钥对.
","1.
用户视图下打开PKI模块debug开关,查看相关调试信息确定问题原因.
","PKI/4/RSA_DESTORY_FAILED","1.
正常运行信息,无需处理.
""RSA_DESTORY_FAILED","GETTING_CA_CERT","DeletingRSAlocalkeypair[key_name]failed.
","4","RSA密钥对销毁失败.
","PKI/4/RSA_DESTORY_SUCCEED","1.
用户视图下打开PKI模块debug开关,查看相关调试信息确定问题原因.
","PKI/4/RSA_DESTORY_SUCCEED","PKI/4/RSA_CREATE_OK""RSA_DESTORY_SUCCEED","GETTING_CA_CERT","DeletingRSAlocalkeypair[key_name]succeeded.
","4","RSA密钥对销毁成功.
","PKI/4/RSA_HA_BACK","1.
用户视图下打开PKI模块debug开关,查看相关调试信息确定问题原因.
","PKI/4/RSA_HA_BACK","1.
正常运行信息,无需处理.
""RSA_HA_BACK","GETTING_CA_CERT","BackingupRSAlocalkeypair[key_name]tothestandbyMPU.
.
.
","4","正在备份RSA密钥对到备主控板.
","备份RSA密钥对到备主控板.
","1.
用户视图下打开PKI模块debug开关,查看相关调试信息确定问题原因.
","PKI/4/RSA_HA_DEL","1.
正常运行信息,无需处理.
""RSA_HA_DEL","GETTING_CA_CERT","DeletingRSAlocalkeypair[key_name]onthestandbyMPU.
","4","删除备主控的RSA密钥对.
","PKI/4/RSA_HRP_BACK","1.
用户视图下打开PKI模块debug开关,查看相关调试信息确定问题原因.
","PKI/4/RSA_HRP_BACK","1.
正常运行信息,无需处理.
""RSA_HRP_BACK","GETTING_CA_CERT","BackingupRSAlocalkeypair[key_name]tothestandbydevice.
","4","备份RSA密钥对到备用设备.
","PKI/4/RSA_HRP_BATCH","1.
用户视图下打开PKI模块debug开关,查看相关调试信息确定问题原因.
","PKI/4/RSA_HRP_BATCH","1.
正常运行信息,无需处理.
""RSA_HRP_BATCH","GETTING_CA_CERT","BackingupRSAlocalkeypairsinbatchestothestandbydevice.
.
.
","4","正在批量备份所有的RSA密钥对到备用设备.
","手工执行命令行批量备份所有的RSA密钥对到备用设备.
","无:无","PKI/4/RSA_HRP_BATCH_ERR","1.
正常运行信息,无需处理.
""RSA_HRP_BATCH_ERR","GETTING_CA_CERT","BackingupRSAlocalkeypairsinbatchestothestandbydevicefailed.
","4","批量备份所有的RSA密钥对到备用设备失败.
","PKI/4/RSA_HRP_BATCH_OK","无:无","PKI/4/RSA_HRP_BATCH_OK","PKI/4/RSA_CREATE_OK""RSA_HRP_BATCH_OK","GETTING_CA_CERT","BackingupRSAlocalkeypairsinbatchestothestandbydevicesucceeded.
","4","批量备份所有的RSA密钥对到备用设备成功.
","PKI/4/RSA_HRP_DEL","无:无","PKI/4/RSA_HRP_DEL","1.
正常运行信息,无需处理.
""RSA_HRP_DEL","GETTING_CA_CERT","DeletingRSAlocalkeypair[key_name]onthestandbydevice.
","4","删除备用设备的RSA密钥对.
","PKI/4/RSA_HRP_FAILED","1.
用户视图下打开PKI模块debug开关,查看相关调试信息确定问题原因.
","PKI/4/RSA_HRP_FAILED","1.
正常运行信息,无需处理.
""RSA_HRP_FAILED","GETTING_CA_CERT","HRPrealtimeoperationaboutRSAlocalkeypair[key_name]failed.
","4","RSA密钥对HRP实时操作失败.
","1.
查看双机热备状态是否稳定.
2.
用户视图下打开PKI模块debug开关,查看相关调试信息确定问题原因.
","1.
用户视图下打开PKI模块debug开关,查看相关调试信息确定问题原因.
","1.
查看双机热备状态是否稳定.
2.
用户视图下打开PKI模块debug开关,查看相关调试信息确定问题原因.
","PKI/4/RSA_REPLACE""RSA_REPLACE","GETTING_CA_CERT","RSAlocalkeypair[key_name]willbereplacedbyanewone.
","4","RSA密钥对将会被替换.
","手工执行命令行创建RSA密钥对时,此密钥对名称已存在,且用户选择覆盖.
","1.
用户视图下打开PKI模块debug开关,查看相关调试信息确定问题原因.
","PKI/4/RSA_SAVE_FAILED","1.
正常运行信息,无需处理.
""RSA_SAVE_FAILED","GETTING_CA_CERT","SavingRSAlocalkeypair[key_name]failed.
","4","RSA密钥对保存失败.
","PM/3/IDX_REACH_UPPER","1.
用户视图下打开PKI模块debug开关,查看相关调试信息确定问题原因.
","PM/3/IDX_REACH_UPPER","PKI/4/RSA_CREATE_OK""PM","IDX_REACH_UPPER","Thenumberofmeasurehasreachedtheupperlimit([max-number]).
","3","当统计指标的数量超出上限时,记录此日志.
","[max-number]:支持的最大统计指标数量.
","用户注册统计指标过多.
","1.
减少注册的统计指标.
","PM/4/STATISTICS_DELETE_FILE""STATISTICS_DELETE_FILE","IDX_REACH_UPPER","Theoldperformancefile[Filename]isdeletedbecausediskspaceisinsufficient.
","4","由于磁盘空间不足,删除老的性能统计文件.
","Filename:被删除的性能统计文件名称.
","由于磁盘空间不足,PM生成新的性能统计文件时导致老的性能统计文件被删除.
","1.
释放磁盘空间,满足性能统计文件的生成需求.
","PM/4/STATISTICS_DISABLE_CONFIRM""STATISTICS_DISABLE_CONFIRM","IDX_REACH_UPPER","Whendecidingwhethertodisablethedatastatisticsfunction,theuserchoseYES.
","4","当取消数据统计功能时,记录此日志.
","用户执行去使能数据统计功能命令并且选择确认.
","无:无","PM/4/STATISTICS_TASK_DELETE_CONFIRM","1.
正常运行信息,无需处理.
""STATISTICS_TASK_DELETE_CONFIRM","IDX_REACH_UPPER","Whendecidingwhethertodeletethestatisticstask,theuserchoseYES.
(TaskName=[STRING])","4","当删除统计任务时,记录此日志.
","TaskName:统计任务名称","用户执行删除统计任务命令并且选择确认.
","PM/4/STATISTICS_TASK_RECORD_FILE_DISABLE","1.
正常运行信息,无需处理.
""STATISTICS_TASK_RECORD_FILE_DISABLE","IDX_REACH_UPPER","Whendecidingwhethertodisablethefilerecordfunction,theuserchoseYES.
(TaskName=[STRING])","4","当文件记录功能去使能时,记录此日志.
","用户执行去使能文件记录功能命令并且选择确认.
","用户执行删除统计任务命令并且选择确认.
","PM/4/STATISTICS_TASK_RECORDINTERVAL_CHANGE_CONFIRM","1.

正常运行信息,无需处理.
""STATISTICS_TASK_RECORDINTERVAL_CHANGE_CONFIRM","IDX_REACH_UPPER","Whendecidingwhethertochangetheintervalbetweenrecordsofthestatisticstask,theuserchoseYES.
(TaskName=[STRING])","4","当改变统计任务的文件保存周期时,记录此日志.
","TaskName:统计任务名称.
","用户执行改变统计任务的文件保存周期命令并且选择确认.
","PM/4/STATISTICS_TASK_STATCYCLE_CHANGE_CONFIRM","1.

正常运行信息,无需处理.
""STATISTICS_TASK_STATCYCLE_CHANGE_CONFIRM","IDX_REACH_UPPER","Whendecidingwhethertochangethecycleofthestatisticstask,theuserchoseYES.
(TaskName=[STRING])","4","当改变统计任务的周期时,记录此日志.
","用户执行改变统计任务的周期命令并且选择确认.
","用户执行改变统计任务的文件保存周期命令并且选择确认.
","PM/4/STATISTICS_TASK_TRANSFER_FILE","1.

正常运行信息,无需处理.
""STATISTICS_TASK_TRANSFER_FILE","IDX_REACH_UPPER","Theperformancestatisticsfilewastransferredthrough[FTP/SFTP].
(UserName=[STRING],OperateType=[STRING],SrcFile=[STRING],DstFile=[STRING],DstHost=[STRING],VPN=[STRING],ErrCode=[LONG])","4","当使用FTP/SFTP上传PM文件后,记录上传文件日志.
","FTP/SFTP:上传统计文件的协议.
UserName:用户名称.
OperateType:操作类型.
SrcFile:源文件.
DstFile:目标文件.
DstHost:目标主机.
VPN:VPN实例名称.
ErrCode:错误编码.
","PM自动上传统计文件.
","PM/4/THRESHOLD_DISABLE_CONFIRM","1.
正常运行信息,无需处理.
""THRESHOLD_DISABLE_CONFIRM","IDX_REACH_UPPER","Whendecidingwhethertodisablethethresholdalarmfunction,theuserchoseYES.
(TaskName=[STRING])","4","去使能阈值告警功能时,记录此日志.
","用户执行去使能阈值告警功能命令并且选择确认.
","用户执行删除统计任务命令并且选择确认.
","POLICY/2/POLICYACCFAIL","1.

正常运行信息,无需处理.
""POLICY","POLICYACCFAIL","Policyaccelerationfailed,thedevicedoesn'thaveenoughmemory.
","2","策略加速失败,设备内存不足.
","由于设备内存不足,导致设备策略加速失败.
","无:无","1.
请联系华为工程师进行处理.
","POLICY/6/POLICYPERMIT""POLICYPERMIT","POLICYACCFAIL","vsys=[vsys-name],protocol=[protocol],source-ip=[source-ip-address],source-port=[source-port],destination-ip=[destination-ip-address],destination-port=[destination-port],time=[time],source-zone=[source-zone],destination-zone=[destination-zone],rule-name=[rule-name]","6","报文命中了动作为允许的安全策略.
","protocol:协议.
source-ip-address:源IP地址.
source-port:源端口.
destination-ip-address:目的IP地址.
destination-port:目的端口.
","POLICY/6/POLICYDENY","protocol:协议.
source-ip-address:源IP地址.
source-port:源端口.
destination-ip-address:目的IP地址.
destination-port:目的端口.
","1.
正常运行信息,无需处理.
""POLICYDENY","POLICYACCFAIL","vsys=[vsys-name],protocal=[protocol],source-ip=[source-ip-address],source-port=[source-port],destination-ip=[destination-ip-address],destination-port=[destination-port],time=[time],source-zone=[source-zone],destination-zone=[destination-zone],rule-name=[rule-name]","6","报文命中了动作为阻断的安全策略.
","QOSADA/6/CARIDUSEDUP","POLICY/6/POLICYDENY","QOSADA/6/CARIDUSEDUP","1.

正常运行信息,无需处理.
""QOSADA","CARIDUSEDUP","Inthe[direction]direction,CARIDof[carid]isexhaustedinslot[slot-id].
","6","某单板的某个方向上没有某个类型的CARID剩余.
","direction:方向.
carid:CARID资源类型.
slot-id:槽位号.
","某单板的某个方向某个类型的CARID资源耗尽.
","QOSADA/6/GIDUSEDUP","1.
正常运行信息,无需处理.
""GIDUSEDUP","CARIDUSEDUP","Policyresourceisexhaustedinslot[slot-id].
","6","某单板的策略资源耗尽.
","接口板上应用的复杂流分类策略已经超规格.
","1.
联系华为工程师进行处理.
","1.
检查是否存在不再使用的策略,如果存在,删除该策略,以释放更多空间,或者重新配置当前策略.
","RDS/4/RDACCTDOWN""RDS","RDACCTDOWN","RADIUSaccountingserver(IP:[ip-address]Vpn-Instance:--)isdown!
","4","RADIUS计费服务器通讯中断.
","ip-address:计费服务器的IP地址.
Vpn-Instance:此参数无效.
","计费服务器状态为Down.
","1.
在RADIUS计费服务器上查看一下服务器是不是被关闭.
·如果是关闭了计费服务器,则不用处理.
·如果计费服务器没有关闭,则=〉2.
2.
检查链路状态是否正常,检查RADIUS服务器和设备之间是否能Ping通.
·如果是链路不正常造成的,请恢复链路.
·如果链路正常,则=〉3.
3.
检测配置的共享密钥是否正确,执行命令displayradius-serverconfiguration.
·若不正确,请执行命令radius-servershared-keycipherkey-string,配置RADIUS服务器的共享密钥.
·如正确,则=〉4.
4.
请联系技术支持工程师.
","RDS/4/RDAUTHDOWN""RDAUTHDOWN","RDACCTDOWN","RADIUSauthenticationserver(IP:[ip-address]Vpn-Instance:--)isdown!
","4","RADIUS认证服务器通讯中断.
","ip-address:认证服务器的IP地址.
Vpn-Instance:此参数无效.
","认证服务器状态为Down.
","1.
在RADIUS认证服务器上查看一下服务器是不是被关闭.
·如果是关闭了认证服务器,则不用处理.
·如果认证服务器没有关闭,则=>2.
2.
检查链路状态是否正常,检查RADIUS认证服务器和设备之间是否能Ping通.
·如果是链路不正常造成的,请恢复链路.
·如果链路正常,则=>3.
3.
检测配置的共享密钥是否正确,执行命令displayradius-serverconfiguration.
·若不正确,请执行命令radius-servershared-keycipherkey-string,配置RADIUS服务器的共享密钥.
·如正确,则=>4.
4.
请联系技术支持工程师.
","RDS/6/RDACCTUP""RDACCTUP","RDACCTDOWN","RADIUSaccountingserver(IP:[ip-address]Vpn-Instance:--)isup.
","6","RADIUS计费服务器通讯恢复.
","·设备和RADIUS计费服务器连接的链路恢复.
·RADIUS计费服务器启动成功.
","计费服务器状态为Down.
","RDS/6/RDAUTHUP","1.
正常运行信息,无需处理.
""RDAUTHUP","RDACCTDOWN","RADIUSauthenticationserver(IP:[ip-address]Vpn-Instance:--)isup.
","6","RADIUS认证服务器通讯恢复.
","·设备和RADIUS认证服务器连接的链路恢复.
·RADIUS认证服务器启动成功.
","认证服务器状态为Down.
","REASM/5/FRAGSTAT","1.
正常运行信息,无需处理.
""REASM","FRAGSTAT","AbnormalIPfragmentstatistics.
(SyslogId=[syslog-id],OverlapPkts=[overlap-diff-num],SuperPkts=[superfrag-num])","Whenbeingaskedwhethertocommitthecommand"undobulk-statenable",theuserchoseN.
","IP分片异常统计信息.
","syslog-id:日志序号.
overlap-diff-num:重叠内容不一致的报文数.
这里的"重叠内容"是指IP报文存在分片,分片报文之间出现重叠,且两个分片重叠的内容不相同.
设备认为这种分片报文存在异常.
superfrag-num:超大分片报文数.
","网络中传输的IP分片报文出现异常.
","REASM/5/STREAMSTAT","1.
正常运行信息,无需处理.
""STREAMSTAT","FRAGSTAT","AbnormalTCPstreamstatistics.
(SyslogId=[syslog-id],InvalidOptPkts=[invalid-option-num])","Whenbeingaskedwhethertocommitthecommand"undobulk-statenable",theuserchoseN.
","TCP流异常统计信息.
","syslog-id:日志序号.
invalid-option-num:无效TCP选项的报文数.
","报文中含有无效的TCP选项.
","NHRP/4/REVERSE_ROUTE_CONFLICT","1.
正常运行信息,无需处理.
""NHRP","REVERSE_ROUTE_CONFLICT","TheNHRPconflictreverse-routeisfound.
(Address=[STRING1],Mask=[STRING2],Ifindex=[ULONG],Nexthop=[STRING3],ConflictNexthop=[STRING4])","4","DSVPN网络中,总部Hub发现一条冲突的反向路由.
","[STRING1]:反向路由的IP地址.
[STRING2]:反向路由的掩码.
[ULONG]:Tunnel接口的索引.
[STRING3]:反向路由的下一跳.
[STRING4]:冲突的反向路由的下一跳.
","DSVPN网络中,分支Spoke向总部Hub添加一条反向路由,总部Hub中已存在相同的反向路由.
","1.
检查配置,解决冲突.
","NHRP/6/REVERSE_ROUTE_DELETE""REVERSE_ROUTE_DELETE","REVERSE_ROUTE_CONFLICT","TheNHRPserverdeletesareverse-route.
(Address=[STRING1],Mask=[STRING2],Ifindex=[ULONG],Nexthop=[STRING3])","6","DSVPN网络中,总部Hub成功删除一条反向路由.
","[STRING1]:反向路由的IP地址.
[STRING2]:反向路由的掩码.
[ULONG]:Tunnel接口的索引.
[STRING3]:反向路由的下一跳.
","DSVPN网络中,分支Spoke发送反向路由删除消息到总部Hub,总部Hub删除对应的反向路由信息.
","NHRP/6/REVERSE_ROUTE_INSERT","1.

正常运行信息,无需处理.
""REVERSE_ROUTE_INSERT","REVERSE_ROUTE_CONFLICT","TheNHRPserverinsertsareverse-route.
(Address=[STRING1],Mask=[STRING2],Ifindex=[ULONG],Nexthop=[STRING3])","6","DSVPN网络中,总部Hub成功生成一条反向路由.
","DSVPN网络中,分支Spoke发送反向路由注入消息到总部Hub,总部Hub添加对应的反向路由信息.
","DSVPN网络中,分支Spoke发送反向路由删除消息到总部Hub,总部Hub删除对应的反向路由信息.
","RIP/3/ADD_RTE_F","1.

正常运行信息,无需处理.
""RIP","ADD_RTE_F","Becauseofunsuccessfulvalidation,routesnotaddedtodatabase.
Total[ULONG]occurrencessince[STRING][STRING].
(Destination=[IPADDR]/[STRING],Interface=[STRING],ProcessId=[ULONG]).
","3","由于确认路由失败,不能增加路由到数据库.
","[number]:指示RIP验证和向数据库添加路由失败的次数.
[date]:最后一个有类节点被添加到更新表单的日期.
[time]:最后一个有类节点被添加到更新表单的时间.
Destination:目的IP地址.
Interface:接口名称.
ProcessId:进程ID.
","RIP/3/DEL_SAMEADDR_PEER_F","[number]:指示RIP验证和向数据库添加路由失败的次数.
[date]:最后一个有类节点被添加到更新表单的日期.
[time]:最后一个有类节点被添加到更新表单的时间.
Destination:目的IP地址.
Interface:接口名称.
ProcessId:进程ID.
","IFNET/5/ACOAM_STATE_CHANGE""DEL_SAMEADDR_PEER_F","ADD_RTE_F","Deletedthepeer[IPADDR]configurationwiththesameaddressasthelocalinterface.
(ProcessId=[ULONG],Interface=[STRING])","3","删除与本地接口相同地址的邻居配置.
","[IPADDR]:RIP邻居的接口地址.
ProcessId:进程ID.
Interface:接口名称.
","本地接口与邻居具有相同的IP地址.
","1.
修改邻居接口的IP地址或者本地接口的IP地址.
","RIP/6/FREEZE_ENTER""FREEZE_ENTER","ADD_RTE_F","ThenumberofroutesonRIPprocess[process-id]reachedtheupperthreshold,andthustheRIPprocesswassuspended.
","6","当RIP进程路由数达到最大路由上限,将该进程挂起,不处理接收到的报文.
","[process-id]:RIP进程号.
","RIP进程的路由数达到最大路由上限.
","RIP/6/FREEZE_RECOVER","1.
正常运行信息,无需处理.
""FREEZE_RECOVER","ADD_RTE_F","Thenumberofroutesreachedthelowerthreshold,andthusRIPprocess[process-id]recoveredfromthesuspensionstateandresumedprocessingpackets.
","6","当RIP进程路由数达到最大路由下限,该RIP进程从挂起状态恢复,重新正常处理报文.
","RIP进程的路由数达到最大路由下限.
","RIP进程的路由数达到最大路由上限.
","RIP/6/GR_ABORT","1.

正常运行信息,无需处理.
""GR_ABORT","ADD_RTE_F","AbortedGracefulRestart.
(AbortReason=[STRING],ProcessId=[ULONG])","6","GR异常中断.
","AbortReason:中断的原因.
·原因1:由于网络拓扑变化,而收到来自于HelperRouter的异常中断消息·原因2:新的接口被添加到RestartingRouter·原因3:RestartingRouter删除已存在接口·原因4:状态变化·原因5:发生删除接口或者接口状态由Up状态变成Down状态的事件ProcessId:进程ID.
","GR过程中出现异常中断.
","1.
服务将会短时间中断,系统会在GR完成之后自动恢复.
","RIP/6/GR_ENTER""GR_ENTER","ADD_RTE_F","EnteringGracefulRestartmode.
(Mode=[STRING],ProcessId=[ULONG])","6","设备进入GR过程.
","Mode:指示GR的模式.
·模式1:计划的模式·模式2:非计划的模式ProcessId:进程ID.
","设备进入GR模式.
","RIP/6/GR_ENTER_HELPER","1.
正常运行信息,无需处理.
""GR_ENTER_HELPER","ADD_RTE_F","Enteringhelpermodeforrestartingneighbor[ip-address]for[timer-value]seconds.
(ProcessId=[ULONG])","6","设备开始为GRRestarting的邻居路由器进入Helper模式.
","[ip-address]:Helper路由器的IP地址.
[timer-value]:GRCut-off计时器.
ProcessId:进程ID.
","设备开始为GRRestarting的邻居充当Helper.
","RIP/6/GR_EXIT","1.
正常运行信息,无需处理.
""GR_EXIT","ADD_RTE_F","ExitingGracefulRestartmode.
(Mode=[STRING],ProcessId=[ULONG])","6","设备作为Restarter从GR状态退出.
","Mode:GR的模式.
ProcessId:进程ID.
","对于作为Restarter的设备意味着GR结束.
","RIP/6/GR_EXIT_HELPER","1.
正常运行信息,无需处理.
""GR_EXIT_HELPER","ADD_RTE_F","Exitinghelpermodeforrestartingneighbor[IPAddress].
(Reason=[STRING],ProcessId=[ULONG])","6","GR结束之后,作为Helper的设备退出Helper模式.
","IPAddress:作为Helper的设备的IP地址.
Reason:中止的原因.
ProcessId:进程码.
","GR结束之后,设备不再为邻居路由器充当Helper.
","RIP/6/GR_EXIT_RT_UPDT","1.
正常运行信息,无需处理.
""GR_EXIT_RT_UPDT","ADD_RTE_F","Exitingrouteupdatephase.
(Reason=[STRING],ProcessId=[ULONG])","6","路由更新结束.
","Reason:退出路由更新的原因.
ProcessId:进程ID.
","Restarter从Helper收到UCN(更新完成指示)之后,将路由更新至RM.
","RIP/3/GR_RCV_ABORT","1.
正常运行信息,无需处理.
""GR_RCV_ABORT","ADD_RTE_F","Receivedabortnotificationfromhelper[IPADDR]oninterface[InterfaceName].
(ProcessId=[ULONG])","3","Restarter会从Helper收到一条异常中止消息.
","[IPADDR]:Helper路由器的IP地址.
[InterfaceName]:接口名称.
ProcessId:进程ID.
","拓扑或者配置的更改.
","1.
此消息指示GR已经停止,无需处理.
","RIP/6/GR_SND_ABORT""GR_SND_ABORT","ADD_RTE_F","Sendingabortnotificationtoneighbor[IPADDR]oninterface[InterfaceName].
(ProcessId=[ULONG])","6","在接口上向邻居路由器发送异常通知.
","[IPADDR]:Restarter路由器的IP地址.
[InterfaceName]:接口名称.
ProcessId:进程ID.
","由于拓扑和配置的变化,在接口上向邻居路由器发送异常通知.
","RIP/6/GR_TOPO_CHANGE","RIP/6/GR_SND_ABORT""GR_TOPO_CHANGE","ADD_RTE_F","Detectedtopologychangeoninterface[interface-name].
(ProcessId=[ULONG])","6","在接口上发现拓扑变更.
","[interface-name]:接口名称.
ProcessId:进城号.
","拓扑或者配置变更.
","RIP/6/ISSU_COMP","1.
正常运行信息,无需处理.
""ISSU_COMP","ADD_RTE_F","RIPfinishedPAFcomparison.
Theupgradetypeis[STRING].
","6","RIP完成PAF/License的比较,确认并通告升级类型.
","[STRING]:指示升级的类型.
·类型1:lossless·类型2:lossy","RIP完成了PAF/License对比.
","RIP/3/JOIN_MCST_GRP_F","1.
正常运行信息,无需处理.
""JOIN_MCST_GRP_F","ADD_RTE_F","JoiningRIPmulticastgroupisunsuccessful.
Total[number]occurrencessince[date][time].
(ProcessId=[ULONG],ErrorCode=[LONG])","3","在接口上加入RIP组播组成员失败.
","[number]:总计失败次数.
[date]:日期.
[time]:时间.
ProcessId:进程ID.
ErrorCode:错误码.
","1.
等待,直到超载消除.
2.
收集日志信息,联系华为技术支持工程师.
","[number]:总计失败次数.
[date]:日期.
[time]:时间.
ProcessId:进程ID.
ErrorCode:错误码.
","RIP/3/LEAVE_MCST_GRP_F""LEAVE_MCST_GRP_F","ADD_RTE_F","LeavingRIPmulticastgroupisunsuccessful.
Total[number]occurrencessince[date][time].
(ProcessId=[ULONG],ErrorCode=[LONG])","3","在接口上离开RIP组播组成员失败.
","ProcessId:进程ID.
ErrorCode:错误码.
","RIP在接口上离开组播组成员失败.
","1.
收集日志信息,联系华为技术支持工程师.
","RIP/3/MAX_LOGIF_REACH_F""MAX_LOGIF_REACH_F","ADD_RTE_F","Thenumberofsupportedlogicalinterfacesreachedthemaximumvalue.
Total[ULONG]occurrencessince[STRING][STRING].
(ProcessId=[ULONG]).
","3","在进程中配置的逻辑接口数达到了最大值.
共计[ULONG]次,从[STRING][STRING]开始.
","[ULONG]:时间请求报文发送的总数.
[STRING]:最后一个请求报文发送的日期.
[STRING]:最后一个请求报文发送的时间.
ProcessId:进程ID.
","逻辑接口数达到了最大值.
","RIP/6/MEMSHORT_ENTER","RIP/3/MAX_LOGIF_REACH_F""MEMSHORT_ENTER","ADD_RTE_F","RIPreceivedmemoryshortagenotification.
","6","RIP/6/MEMSHORT_RECOVER","内存不足.
","无:无","内存不足.
","IFNET/5/ACOAM_STATE_CHANGE""MEMSHORT_RECOVER","ADD_RTE_F","RIPreceivedmemoryshortagerecoverynotification.
","6","系统从内存不足状态恢复.
","RIP/6/RIP_NBR_ADD","无:无","RIP/6/RIP_NBR_ADD","1.
正常运行信息,无需处理.
""RIP_NBR_ADD","ADD_RTE_F","RIPneighborisaddedontheinterface.
(ProcessId=[ULONG],Interface=[STRING],Neighbor=[IPADDR])","6","RIP进程中增加了新的邻居信息.
","ProcessId:RIP进程号.
Interface:接口名称.
Neighbor:邻居IP地址.
","路由器接收到了新的RIP邻居信息.
","RIP/6/RIP_NBR_DEL","BWM/4/SESS_IP""RIP_NBR_DEL","ADD_RTE_F","RIPNeighborisdeletedfromtheinterface.
(ProcessId=[ULONG],Interface=[STRING],Neighbor=[IPADDR],Reason=[STRING])","6","接口上删除了RIP邻居.
","ProcessId:RIP进程号.
Interface:接口名称.
Neighbor:邻居IP地址.
Reason:删除邻居的原因.
","邻居被删掉的可能原因有:·RIP邻居接口变成Down状态或者被删除.
·类似版本改变的配置改变.
·定时器超时.
","RIP/6/RCV_HA_SMOVER","1.
正常运行信息,无需处理.
""RCV_HA_SMOVER","ADD_RTE_F","ReceivedthenotificationthatHASmoothiscomplete.
","6","收到平滑完成报告.
","RIP/6/RCV_HA_SYNC","无:无","RIP/6/RCV_HA_SYNC","1.
正常运行信息,无需处理.
""RCV_HA_SYNC","ADD_RTE_F","ReceivedHAsmoothnotificationforsynchronizingexternalmodules.
","6","收到同步外部模块报告.
","RIP/6/RCV_HA_SYNC_IN","无:无","RIP/6/RCV_HA_SYNC_IN","1.
正常运行信息,无需处理.
""RCV_HA_SYNC_IN","ADD_RTE_F","ReceivedHAsmoothnotificationforsynchronizinginternalmodule.
","6","收到同步内部模块报告.
","RIP/6/RL_NOTIFY_ADD","无:无","RIP/6/RL_NOTIFY_ADD","1.
正常运行信息,无需处理.
""RL_NOTIFY_ADD","ADD_RTE_F","RIPreceivedrouteaddnotificationfromRM.
(InstanceId=[ULONG])","6","从RM收到了添加路由的通知.
","InstanceId:实例的ID.
","路由限制特性被修改,从而RIP收到了来自于RM关于增加路由的通知.
","RIP/6/RL_NOTIFY_DEL","1.
正常运行信息,无需处理.
""RL_NOTIFY_DEL","ADD_RTE_F","RIPreceivedroutedeletenotificationfromRM.
(InstanceId=[ULONG])","6","从RM收到了删除路由的通知.
","路由限制特性被修改,从而RIP收到了来自于RM关于删除路由的通知.
","路由限制特性被修改,从而RIP收到了来自于RM关于增加路由的通知.
","RIP/6/RL_NOTIFY_DEL_OVER","1.

正常运行信息,无需处理.
""RL_NOTIFY_DEL_OVER","ADD_RTE_F","RIPcompletedroutedeletionfromRMDB.
(InstanceId=[ULONG])","6","RIP在RM数据库中完成路由的删除.
","RIP在RM数据库中完成对RIP路由信息的删除.
","路由限制特性被修改,从而RIP收到了来自于RM关于增加路由的通知.
","RIP/6/RM_NOTIFY_EXIT_GR","1.

正常运行信息,无需处理.
""RM_NOTIFY_EXIT_GR","ADD_RTE_F","RipreceivedGracefulRestartcompletenotificationfromRMforinstance.
(InstanceId=[ULONG])","6","RIP从RM收到实例完成GR的通知.
","实例完成了GR过程.
","路由限制特性被修改,从而RIP收到了来自于RM关于增加路由的通知.
","RIPNG/6/FREEZE_ENTER","1.

正常运行信息,无需处理.
""RIPNG","ThenumberofroutesonRIPngprocess[process-id]reachedtheupperthreshold,andthustheRIPngprocesswassuspended.
","ThenumberofroutesonRIPprocess[process-id]reachedtheupperthreshold,andthustheRIPprocesswassuspended.
","6","当RIPng进程路由数达到最大路由上限,将该进程挂起,不处理接收到的报文.
","[process-id]:RIPng.
","RIPng进程的路由数达到最大路由上限.
","RIPNG/6/FREEZE_RECOVER","1.
正常运行信息,无需处理.
""Thenumberofroutesreachedthelowerthreshold,andthusRIPngprocess[process-id]recoveredfromthesuspensionstateandresumedprocessingpackets.
","ThenumberofroutesonRIPngprocess[process-id]reachedtheupperthreshold,andthustheRIPngprocesswassuspended.
","Thenumberofroutesreachedthelowerthreshold,andthusRIPprocess[process-id]recoveredfromthesuspensionstateandresumedprocessingpackets.
","6","当RIPng进程路由数达到最大路由下限,该RIPng进程从挂起状态恢复,重新正常处理报文.
","[process-id]:RIPng进程号.
","RIPng进程的路由数达到最大路由下限.
","RIPNG/3/INVLD_IF_MTU_F","1.
正常运行信息,无需处理.
""INVLD_IF_MTU_F","ThenumberofroutesonRIPngprocess[process-id]reachedtheupperthreshold,andthustheRIPngprocesswassuspended.
","RIPngcouldnotrunoninterface[interface-name]withtheMTUas[mtu-value].
","3","接口MTU值不满足RIPng运行条件.
","[interface-name]:接口名称.
[mtu-value]:最大传输单元值.
","改变接口MTU配置.
","1.
重新设置接口的MTU.
","RIPNG/3/IPV6_DISAB_F""IPV6_DISAB_F","ThenumberofroutesonRIPngprocess[process-id]reachedtheupperthreshold,andthustheRIPngprocesswassuspended.
","IPv6wasnotenabledglobally.
(ProcessId=[ULONG])","3","全局IPv6没有使能.
","ProcessId:进程ID.
","1.
系统视图下,使能IPv6.
","ProcessId:进程ID.
","RIPNG/6/ISSU_COMP""RIPngfinishedPAFcomparison.
Theupgradetypeis[upgrade-type].
","ThenumberofroutesonRIPngprocess[process-id]reachedtheupperthreshold,andthustheRIPngprocesswassuspended.
","RIPfinishedPAFcomparison.
Theupgradetypeis[STRING].
","6","RIPng完成了PAF/License比较,确定并通告升级的类型.
","[upgrade-type]:指示升级的类型.
·类型1:lossless·类型2:lossy","在RIPng完成了PAF/License比较之后,确定并通告升级的类型.
","RIPNG/3/MAX_LOGIF_REACH_F","1.
正常运行信息,无需处理.
""ThenumberofRIPngconfigurablelogicalinterfacesreachedthemaximumvalue.
(ProcessId=[ULONG])","ThenumberofroutesonRIPngprocess[process-id]reachedtheupperthreshold,andthustheRIPngprocesswassuspended.
","Thenumberofsupportedlogicalinterfacesreachedthemaximumvalue.
Total[ULONG]occurrencessince[STRING][STRING].
(ProcessId=[ULONG]).
","3","达到RIPng所支持的最大网络数.
","1.
从RIPng中撤销一些网络.
","1.
系统视图下,使能IPv6.
","1.
从RIPng中撤销一些网络.
","RIPNG/6/MEMSHORT_ENTER""RIPngreceivedmemoryshortagenotification.
","ThenumberofroutesonRIPngprocess[process-id]reachedtheupperthreshold,andthustheRIPngprocesswassuspended.
","RIPreceivedmemoryshortagenotification.
","6","RIPng收到内存不足通知.
","系统内存占用过高.
","无:无","RIPNG/6/MEMSHORT_RECOVER","1.
正常运行信息,无需处理.
""RIPngreceivedmemoryshortagerecoverynotification.
","ThenumberofroutesonRIPngprocess[process-id]reachedtheupperthreshold,andthustheRIPngprocesswassuspended.
","RIPreceivedmemoryshortagerecoverynotification.
","6","RIPng收到内存恢复通知.
","系统内存恢复到可用.
","无:无","RIPNG/6/RIPNG_NBR_ADD","1.
正常运行信息,无需处理.
""RIPNG_NBR_ADD","ThenumberofroutesonRIPngprocess[process-id]reachedtheupperthreshold,andthustheRIPngprocesswassuspended.
","RIPngneighborisaddedontheinterface.
(ProcessId=[ULONG],Interface=[STRING],Neighbor=[STRING])","6","RIPng进程增加了新的邻居.
","ProcessId:RIPng进程号.
Interface:接口名称.
Neighbor:邻居的IPv6链路地址.
","RIPng进程接收到新的邻居信息.
","RIPNG/6/RIPNG_NBR_DEL","1.
正常运行信息,无需处理.
""RIPNG_NBR_DEL","ThenumberofroutesonRIPngprocess[process-id]reachedtheupperthreshold,andthustheRIPngprocesswassuspended.
","RIPngneighborisdeletedfromtheinterface.
(ProcessId=[ULONG],Interface=[STRING],Neighbor=[IPADDR],Reason=[STRING])","6","RIPng接口上删掉邻居信息.
","ProcessId:RIPng进程号.
Interface:接口名称.
Neighbor:邻居的IPv6本地链路地址.
Reason:删掉邻居的原因.
","RIPng邻居被删掉的可能原因有:·物理或者逻辑接口Down掉或者被删除.
·配置改变.
·定时器超时.
","RIPNG/3/NO_GLO_SITE_ADDR_F","1.
正常运行信息,无需处理.
""NO_GLO_SITE_ADDR_F","ThenumberofroutesonRIPngprocess[process-id]reachedtheupperthreshold,andthustheRIPngprocesswassuspended.
","Specificrequestisdropped,becauseglobalorsite-localaddressisnotassignedforinterface[interface-name].
(ProcessId=[ULONG])","3","RIPng请求报文被丢弃的原因是接口没有配置全局或者本地地址.
","[interface-name]:接口名称.
ProcessId:进程ID.
","如果一个更新报文被发送到一个非RIPng端口上,那么全局或者本地地址被作为源地址.
","1.
在接口上配置一个全局或者本站地址.
","RIPNG/6/RL_NOTIFY_ADD""RIPngreceivedrouteaddnotificationfromRM.
(InstanceId=[ULONG])","ThenumberofroutesonRIPngprocess[process-id]reachedtheupperthreshold,andthustheRIPngprocesswassuspended.
","RIPreceivedrouteaddnotificationfromRM.
(InstanceId=[ULONG])","6","从RM接收到添加路由的通知.
","限制特性的路由配置被修改,从而收到了来自于RM关于增加路由的通知.
","路由限制特性被修改,从而RIP收到了来自于RM关于增加路由的通知.
","RIPNG/6/RL_NOTIFY_DEL","1.

正常运行信息,无需处理.
""RIPngreceivedroutedeletenotificationfromRM.
(InstanceId=[ULONG])","ThenumberofroutesonRIPngprocess[process-id]reachedtheupperthreshold,andthustheRIPngprocesswassuspended.
","RIPreceivedroutedeletenotificationfromRM.
(InstanceId=[ULONG])","6","从RM接收到删除路由的通知.
","限制特性的路由配置被修改,从而收到了来自于RM关于删除路由的通知.
","路由限制特性被修改,从而RIP收到了来自于RM关于增加路由的通知.
","RIPNG/6/RL_NOTIFY_DEL_OVER","1.

正常运行信息,无需处理.
""RIPngfinishedroutedeletionfromRMDataBase.
(InstanceId=[ULONG])","ThenumberofroutesonRIPngprocess[process-id]reachedtheupperthreshold,andthustheRIPngprocesswassuspended.
","RIPcompletedroutedeletionfromRMDB.
(InstanceId=[ULONG])","6","RIPng已经删除完毕RMDB中的RIPng路由.
","RIPng在RM数据库中完成对RIPng路由信息的删除.
","路由限制特性被修改,从而RIP收到了来自于RM关于增加路由的通知.
","RM/3/ADDHOSTRT_TBL_LMT","1.

正常运行信息,无需处理.
""RM","ADDHOSTRT_TBL_LMT","ThenumberofroutesinURTreachedthemaximumwhenadirectroutewasaddedtoURT.
(DestinationAddress=[STRING])","3","向路由表添加直连路由时,该路由表中的路由数量达到限制值.
","DestinationAddress:目的地址.
","添加路由数量过多或派生路由数量过多.
","1.
购买新的LICENSE.
","RM/6/CONFIRM_N""Theoperationof[STRING]:Auserinput\"No\"tocanceltheoperation.
","ADDHOSTRT_TBL_LMT","CONFIRM_N","6","等待用户确认时,用户输入了"No".
","[STRING]:需要用户确认的具体操作内容.
有下列七种情况.
·eraseallmulticaststaticroutes:删除所有的组播静态路由.
·eraseallpublicIPv4staticroutesandtheirconfigurations:删除所有公网IPv4静态路由及其配置.
·eraseallIPv4staticroutesinthisinstanceandtheirconfigurations:删除所有属于该实例的IPv4静态路由及其配置.
·eraseallpublicIPv6staticroutesandtheirconfigurations:删除所有公网IPv6静态路由及其配置.
·eraseallIPv6staticroutesinthisinstanceandtheirconfigurations:删除所有属于该实例的IPv6静态路由及其配置.
·eraseinformationaboutspecificroutingcounters:删除指定路由计算器的信息.
","RM删除静态路由和相关配置,或者是删除指定路由统计信息时候,需要用户输入确认信息"N"退出该操作.
","RM/6/CONFIRM_TIMEOUT","1.

正常运行信息,无需处理.
""Theoperationof[STRING]:Auserdidnotinputanywordin[ULONG]s,andthesystemautomaticallyexitedfromtheoperation.
","ADDHOSTRT_TBL_LMT","Whenauserdidnotinputanywordin[timeout-time]s,thesystemexitedfromtheoperationautomatically.
","6","等待用户确认时,用户在[ULONG]秒内没有任何输入,系统自动退出.
","[STRING]:需要用户确认的具体操作内容.
有下列七种情况:·eraseallmulticaststaticroutes:删除所有的组播静态路由.
·eraseallpublicIPv4staticroutesandtheirconfigurations:删除所有公网IPv4静态路由及其配置.
·eraseallIPv4staticroutesinthisinstanceandtheirconfigurations:删除所有属于该实例的IPv4静态路由及其配置.
·eraseallpublicIPv6staticroutesandtheirconfigurations:删除所有公网IPv6静态路由及其配置.
·eraseallIPv6staticroutesinthisinstanceandtheirconfigurations:删除所有属于该实例的IPv6静态路由及其配置.
·eraseinformationaboutspecificroutingcounters:删除指定路由计算器的信息.
[ULONG]:从系统开始等待用户确认到用户最终确认的最大等待秒数.
","RM删除静态路由和相关配置,或者是删除指定路由统计信息时候,需要用户输入确认信息,用户在[ULONG]秒内没有任何输入,系统缺省认为不执行并退出该确认.
","RM/6/CONFIRM_Y","1.

正常运行信息,无需处理.
""Theoperationof[STRING]:Auserinput\"Yes\"toconfirmtheoperation.
","ADDHOSTRT_TBL_LMT","Auserinput"Yes"toconfirmtheoperation.
","6","等待用户确认时,用户输入了"Yes".
","RM删除静态路由和相关配置,或者是删除指定路由统计信息时候,需要用户输入确认信息"Y"执行操作.
","RM删除静态路由和相关配置,或者是删除指定路由统计信息时候,需要用户输入确认信息"N"退出该操作.
","RM/6/ENABLE_1MFIB","1.

正常运行信息,无需处理.
""ENABLE_1MFIB","ADDHOSTRT_TBL_LMT","MillionFIBfeaturewasenabled.
","6","百万FIB特性使能.
","百万FIB特性已经使用.
","无:无","RM/3/GET_VRF_TBLID_FAL","1.
正常运行信息,无需处理.
""GET_VRF_TBLID_FAL","ADDHOSTRT_TBL_LMT","FailedtoobtainthetableIDoftheVPNinstance[instance-id].
","3","未能正确获得VPN实例的路由表ID.
","[instance-id]:实例ID.
","RM/6/HANDLE_ADD_IPMSG","[instance-id]:实例ID.
","1.
正常运行信息,无需处理.
""HANDLE_ADD_IPMSG","ADDHOSTRT_TBL_LMT","RMIMreceivedtheeventofaddinganIPaddress.
(IpAddress=[string],Mask=[string],Interface=[string])","6","RM收到IP地址添加事件.
","IpAddress:IP地址.
点分十进制格式.
Mask:掩码.
点分十进制格式.
Interface:接口类型和名称.
","IP模块上报IP地址添加事件.
","RM/6/HANDLE_ADDED_IPMSG","1.
正常运行信息,无需处理.
""HANDLE_ADDED_IPMSG","ADDHOSTRT_TBL_LMT","RMIMprocessedtheeventofaddinganIPaddresssuccessfully.
(IpAddress=[string],Mask=[string],Interface=[string])","6","RM成功响应IP地址添加事件.
","IP模块上报IP地址删添加事件,RM成功处理了此事件.
","IP模块上报IP地址添加事件.
","RM/6/HANDLE_DEL_IPMSG","1.

正常运行信息,无需处理.
""HANDLE_DEL_IPMSG","ADDHOSTRT_TBL_LMT","RMIMreceivedtheeventofdeletinganIPaddress.
(IpAddress=[string],Mask=[string],Interface=[string])","6","RM收到IP地址删除事件.
","IP模块上报IP地址删除事件.
","IP模块上报IP地址添加事件.
","RM/6/HANDLE_DELED_IPMSG","1.

正常运行信息,无需处理.
""HANDLE_DELED_IPMSG","ADDHOSTRT_TBL_LMT","RMIMprocessedtheeventofdeletinganIPaddresssuccessfully.
(IpAddress=[string],Mask=[string],Interface=[string])","6","RM成功响应IP地址删除事件.
","IP模块上报IP地址删除事件,RM成功处理了此事件.
","IP模块上报IP地址添加事件.
","RM/4/INST_RCH_MAX_RT_LMT","1.

正常运行信息,无需处理.
""INST_RCH_MAX_RT_LMT","ADDHOSTRT_TBL_LMT","Thenumberofroutesin[vpn-instance-name]was[current-number],whichreachedorexceededthemaximumvalue[max-value].
(InstanceId=[ULONG],AcceptOrRejectFlag=[STRING])","4","特定VPN实例的路由数达到或超过本VPN实例路由上限.
","[vpn-instance-name]:VPN实例名.
[current-number]:当前的路由数量.
[max-value]:最大路由数量.
InstanceId:VPN实例的ID.
AcceptOrRejectFlag:接受或拒绝标志.
有两种情况:·Accept:允许继续添加路由.
·Reject:不允许继续添加路由.
","1.
displayiprouting-table[vpn-instancevpn-instance-name]statistics确认本VPN实例路由总数及路由类型.
2.
分析各协议路由来源,确认当前该VPN实例的路由量是否属于正常情况.
·Y=>4·N=>33.
去除多余私网路由后,路由总数是否仍然达到或超过路由告警阈值.
·Y=>5·N=>64.
进入本VPN实例视图,displaythis查看routing-tablelimit的配置,确认本私网路由告警阈值设置是否合理.
·Y=>5·N=>请使用命令行routing-tablelimitnumber{alert-percent|simply-alert}重新配置合理的路由告警阈值=>65.
请联系华为技术支持工程师.
6.
结束.
","[vpn-instance-name]:VPN实例名.
[current-number]:当前的路由数量.
[max-value]:最大路由数量.
InstanceId:VPN实例的ID.
AcceptOrRejectFlag:接受或拒绝标志.
有两种情况:·Accept:允许继续添加路由.
·Reject:不允许继续添加路由.
","RM/4/INST_RCH_MAX_RT6_LMT""INST_RCH_MAX_RT6_LMT","ADDHOSTRT_TBL_LMT","ThenumberofroutesinIPv6[vpn-instance-name]was[current-number],whichreachedorexceededthemaximumvalue[max-value].
(InstanceId=[ULONG],AcceptOrRejectFlag=[STRING])","4","特定IPv6VPN实例的路由数达到或超过本VPN实例路由上限.
","[vpn-instance-name]:IPv6VPN实例名.
[max-value]:路由数量最大值.
[current-number]:当前的路由数量.
InstanceId:IPv6VPN实例的ID.
AcceptOrRejectFlag:接受或拒绝标志.
有两种情况:·Accept:允许继续添加路由.
·Reject:不允许继续添加路由.
","1.
displayipv6routing-table[vpn-instancevpn-instance-name]statistics确认本VPN实例路由总数及路由类型.
2.
分析各协议路由来源,确认当前该IPv6VPN实例的路由量是否属于正常情况.
·Y=>4·N=>33.
去除多余私网路由后,路由总数是否仍然达到或超过路由告警阈值.
·Y=>5·N=>64.
进入本IPv6VPN实例视图,displaythis查看routing-tablelimit的配置,确认本私网路由告警阈值设置是否合理.
·Y=>5·N=>请使用命令行routing-tablelimitnumber{alert-percent|simply-alert}重新配置合理的路由告警阈值=>65.
请联系华为技术支持工程师.
6.
结束.
","[vpn-instance-name]:IPv6VPN实例名.
[max-value]:路由数量最大值.
[current-number]:当前的路由数量.
InstanceId:IPv6VPN实例的ID.
AcceptOrRejectFlag:接受或拒绝标志.
有两种情况:·Accept:允许继续添加路由.
·Reject:不允许继续添加路由.
","RM/4/INST_RCH_MAXPFXLMT""INST_RCH_MAXPFXLMT","ADDHOSTRT_TBL_LMT","Thenumberofprefixesin[vpn-instance-name]was[current-number],whichreachedthemaximumvalue[maximum-value].
(InstanceId=[ULONG],AddFlag=[STRING])","4","添加路由时,如果前缀超限,则打印此日志,该日志的打印频率可以通过命令行控制.
","[vpn-instance-name]:VPN实例名.
[current-number]:当前前缀数量.
[maximum-value]:最大前缀数量值.
InstanceId:实例号.
AddFlag:添加标志.
有两种类型:·Accept:接受.
·Deny:拒绝.
","1.
通知管理员,检查是否需要增大路由前缀限定值.
","[vpn-instance-name]:VPN实例名.
[current-number]:当前前缀数量.
[maximum-value]:最大前缀数量值.
InstanceId:实例号.
AddFlag:添加标志.
有两种类型:·Accept:接受.
·Deny:拒绝.
","RM/4/INST_RCH_MAXPFXLMT6""INST_RCH_MAXPFXLMT6","ADDHOSTRT_TBL_LMT","ThenumberofprefixesinIPv6[vpn-instance-name]was[current-number],whichreachedthemaximumvalue[maximum-value].
(InstanceId=[ULONG],AddFlag=[STRING])","4","[vpn-instance-name]:IPv6VPN实例名.
[current-number]:当前前缀数量.
[maximum-value]:最大前缀数量值.
InstanceId:实例号.
AddFlag:添加标志.
有两种类型:·Accept:接受.
·Deny:拒绝.
","[vpn-instance-name]:VPN实例名.
[current-number]:当前前缀数量.
[maximum-value]:最大前缀数量值.
InstanceId:实例号.
AddFlag:添加标志.
有两种类型:·Accept:接受.
·Deny:拒绝.
","RM/4/IPV4_DEFT_RT_CHG","[vpn-instance-name]:VPN实例名.
[current-number]:当前前缀数量.
[maximum-value]:最大前缀数量值.
InstanceId:实例号.
AddFlag:添加标志.
有两种类型:·Accept:接受.
·Deny:拒绝.
","RM/4/INST_RCH_MAXPFXLMT6""IPV4_DEFT_RT_CHG","ADDHOSTRT_TBL_LMT","IPV4defaultRouteischanged.
(ChangeType=[STRING],InstanceId=[USHORT],Protocol=[STRING],ExitIf=[STRING],Nexthop=[STRING],Neighbour=[STRING],Preference=[ULONG],Label=[STRING],Metric=[ULONG])","4","缺省的IPv4路由发生变化.
","ChangeType:路由变化类型.
具体有两种类型:·Delete:删除.
·Modify:修改.
InstanceId:实例ID.
Protocol:协议名称.
ExitIf:出接口.
Nexthop:下一跳.
Neighbour:邻居.
Preference:优先级.
Label:标签路由.
Metric:Metric值.
","原因1:缺省路由的删除.
原因2:修改缺省路由可以下刷到RM的属性.
","RM/4/IPV6_DEFT_RT_CHG","1.
正常运行信息,无需处理.
""IPV6_DEFT_RT_CHG","ADDHOSTRT_TBL_LMT","IPV6defaultRouteischanged.
(ChangeType=[STRING],InstanceId=[USHORT],Protocol=[STRING],ExitIf=[STRING],Nexthop=[STRING],Neighbour=[STRING],Preference=[ULONG],Label=[STRING],Metric=[ULONG])","4","缺省的IPv6路由发生变化.
","ChangeType:路由变化类型.
具体有三种类型:·Add:添加.
·Delete:删除.
·Modify:修改.
InstanceId:实例ID.
Protocol:协议名称.
ExitIf:出接口.
Nexthop:下一跳.
Neighbour:邻居.
Preference:优先级.
Label:标签.
Metric:Metric值.
","原因1:缺省路由的添加或删除,原因2:修改缺省路由可以下刷到RM的属性.
","RM/3/IPV6_RCH_MAX_PFX","1.
正常运行信息,无需处理.
""IPV6_RCH_MAX_PFX","ADDHOSTRT_TBL_LMT","ThenumberofIPv6prefixesreachedthemaximumprefixlimit[max-prefix-limit].
","3","IPv6前缀数量已经到达最大前缀数量限制.
","[max-prefix-limit]:最大前缀限制值.
","IPv6路由前缀已经到达最大值.
","1.
查看路由是否异常.
2.
考虑删除路由.
3.
购买新的license.
","RM/3/LDP_SESSION_STATE""LDP_SESSION_STATE","ADDHOSTRT_TBL_LMT","RMreceivedthestatus[ldp-session]oftheLDPsessiononthe[interface-name].
","3","RM收到在某接口上的LDP会话.
","[ldp-session]:LDP会话.
[interface-name]:接口名称.
","RM/3/LMTNUM_BGER_MAXPAF","[ldp-session]:LDP会话.
[interface-name]:接口名称.
","1.
正常运行信息,无需处理.
""LMTNUM_BGER_MAXPAF","ADDHOSTRT_TBL_LMT","RMrejectedthesettingofroutingtablelimitforinstance(ID)[instance-id]becausethelimitnumber[limit-route-number]wasgreaterthanthemaximumroutelimitdefinedinPAF[paf-route-limit].
","3","为实例设置路由数量上限时被拒绝,因为设置的路由数量限制值大于PAF文件的路由数量上限.
","[instance-id]:实例ID.
[limit-route-number]:设置的路由数量上限.
[paf-route-limit]:PAF文件的路由数量上限.
","VPN路由个数限制的配置大于PAF文件规定的最大路由个数.
","1.
请确认组网需求,是否配置错误.
","RM/3/MAX_RPM_RCH""MAX_RPM_RCH","ADDHOSTRT_TBL_LMT","ThenumberofelementsoftheroutingpolicyreachedthemaximumwhenanAS-PATHlistfilterwascreated.
","3","创建AS-PATH列表过滤器时,路由策略的元素个数已达最大值.
","路由策略的最大元素个数已达最大值.
","无:无","1.
建议删除没用的AS-PATH列表过滤器.
","RM/3/NEW_PFX_NO_FREE_IDX""NEW_PFX_NO_FREE_IDX","ADDHOSTRT_TBL_LMT","NoidleindexwasavailableforthenewIPprefixnodewhenaprefixlistfilterwascreatedforthespecifiedprefixlistnameandinstance.
","3","为给定的前缀列表名和实例创建前缀列表过滤器时,没有空闲索引分配给新的IP前缀结点.
","原因1:最大序列号大于65535.
原因2:前缀节点序列号小于65535.
原因3:临时节点序列号为0.
","无:无","1.
检查前缀列表的配置数量.
2.
检查前缀列表的配置.
","RM/3/NO_FREE_IDX_FOR_PFX""NO_FREE_IDX_FOR_PFX","ADDHOSTRT_TBL_LMT","NoidleindexwasavailableforthenewIPv6-prefixnodewhenaprefixlistfilterwascreated.
","3","创建前缀列表过滤器时,没有空闲的索引值来创建新的IPv6前缀节点.
","创建前缀列表创建过滤时,没有空闲的索引值.
","无:无","1.
建议删除没用的前缀列表Index.
","RM/3/NOTIFY_ISIS_MSG""NOTIFY_ISIS_MSG","ADDHOSTRT_TBL_LMT","RMnotifiedISISofthestatus[ldp-session]oftheLDPsessiononthe[interface-name].
","3","RM通知IS-IS某接口上的LDP会话.
","某接口上建立LDP会话,RM通知IS-IS.
","RM/3/LMTNUM_BGER_MAXPAF","1.

记录下TunnelID和Paf文件中定义的插槽数,即PAF_LCS_SYSTEM_TOTAL_SLOT_NUM的值.
","RM/3/NOTIFY_OSPF_MSG""NOTIFY_OSPF_MSG","ADDHOSTRT_TBL_LMT","RMnotifiedOSPFofthestatus[ldp-session]oftheLDPsessiononthe[interface-name].
","3","RM通知OSPF某接口上的LDP会话.
","某接口上建立LDP会话,RM通知OSPF.
","RM/3/LMTNUM_BGER_MAXPAF","RM/4/PFX_MAX_NUM_CLEARED","1.

正常运行信息,无需处理.
""PFX_MAX_NUM_CLEARED","ADDHOSTRT_TBL_LMT","Thenumberof[table_name]prefixesinpublicinstancereducedto[current_prefix_number],whichwasbelowthemaximumvalue[maximum_prefix_number].
","4","当前路由前缀数量降到系统允许的最大前缀数量以下.
","[table_name]:路由表名字,这里代表IPv4或者IPv6.
[current_prefix_number]:当前的路由前缀数量.
[maximum_prefix_number]:系统允许的最大路由前缀数量.
","原因1:管理员删除了路由或者网络拓扑变化致使动态路由协议学习到的路由数量减少,进而导致IPv4前缀数量降到最大值以下.
原因2:删除或修改公网前缀限制命令,设置增大了公网前缀最大值.
","RM/4/PFX_MID_NUM_CLEARED","1.
正常运行信息,无需处理.
""PFX_MID_NUM_CLEARED","ADDHOSTRT_TBL_LMT","Thenumberof[table_name]prefixesinpublicinstancereducedto[current_prefix_number],whichwasbelowthethresholdvalue[threshold_number].
","4","当前路由前缀数量降到系统允许的最大前缀数量阈值以下.
","[table_name]:路由表名字,这里代表IPv4或者IPv6.
[current_prefix_number]:当前的路由前缀数量.
[threshold_number]:系统允许的最大路由前缀数量阈值.
","原因1:管理员删除了路由或者网络拓扑变化致使动态路由协议学习到的路由数量减少,进而导致公网IPv4前缀数量降到阈值清除告警的阈值以下.
原因2:删除或修改公网前缀限制命令,设置增大了公网前缀阈值.
","RM/4/PFXNUM_EXCD_WARN","1.
正常运行信息,无需处理.
""PFXNUM_EXCD_WARN","ADDHOSTRT_TBL_LMT","Thenumberofprefixesin[vpn-instance-name]was[current-number],whichexceededthealarmthreshold[threshold].
(InstanceId=[ULONG],MaxPrefixLimit=[ULONG])","4","添加路由时,如果前缀超过阈值,但是未超限,则打印此日志,该日志的打印频率可以通过命令行控制.
","[vpn-instance-name]:VPN实例名.
[current-number]:当前的路由前缀数量.
[threshold]:前缀数量的告警阈值.
InstanceId:实例号.
MaxPrefixLimit:最大前缀数量.
","1.
通知管理员,检查是否需要增大路由前缀限定值或阈值百分比.
","[vpn-instance-name]:VPN实例名.
[current-number]:当前的路由前缀数量.
[threshold]:前缀数量的告警阈值.
InstanceId:实例号.
MaxPrefixLimit:最大前缀数量.
","RM/4/PFXNUM_EXCD_WARN6""PFXNUM_EXCD_WARN6","ADDHOSTRT_TBL_LMT","ThenumberofprefixesinIPv6[vpn-instance-name]was[current-number],whichexceededthealarmthreshold[threshold-value].
(InstanceId=[ULONG],MaxPrefixLimit=[ULONG])","4","指定的IPv6私网实例路由前缀数量超过了告警阈值范围.
","[vpn-instance-name]:IPv6VPN实例名.
[current-number]:当前的路由前缀数.
[threshold-value]:告警阈值.
InstanceId:VPN实例的ID.
MaxPrefixLimit:最大的路由前缀数.
","1.
displayipv6routing-table[vpn-instancevpn-instance-name]statistics确认本VPN实例前缀总数.
2.
分析各协议路由来源,确认当前该IPv6VPN实例的路由前缀数量是否属于正常情况.
·Y=>4·N=>33.
去除多余私网路由后,路由前缀总数是否仍然达到或超过告警阈值.
·Y=>5·N=>64.
进入本IPv6VPN实例视图,displaythis查看prefixlimit的配置,确认本私网路由前缀告警阈值设置是否合理.
·Y=>5·N=>请使用命令行prefixlimitnumber{alert-percent|simply-alert}重新配置合理的路由前缀告警阈值=>65.
请联系华为技术支持工程师.
6.
结束.
","[vpn-instance-name]:IPv6VPN实例名.
[current-number]:当前的路由前缀数.
[threshold-value]:告警阈值.
InstanceId:VPN实例的ID.
MaxPrefixLimit:最大的路由前缀数.
","RM/3/PTCL_ADD_RT_MEM_SHT""PTCL_ADD_RT_MEM_SHT","ADDHOSTRT_TBL_LMT","ThesystemmemorywasinsufficientwhenaspecifiedroutewasaddedtotheroutingtableaccordingtotheprotocolID[protocol-id].
","3","根据协议ID向路由表中添加给定的路由时,系统内存不足.
","[protocol-id]:协议ID","协议添加路由时,内存不足.
","RM/4/RCH_ALLVRF_RT_LMT","IFNET/5/ACOAM_STATE_CHANGE""RCH_ALLVRF_RT_LMT","ADDHOSTRT_TBL_LMT","ThenumberofVPN-Instancesroutesreachedtheupperlimit[paf-vpn-route-limit]inthesystemwhentheupperlimitofroutesintheroutingtableinallinstanceswaschecked.
","4","检查路由数量上限时,全部私网路由数量已达系统中的私网路由数量上限.
","[paf-vpn-route-limit]:PAF给出的全部私网路由数量上限","检查URT中路由上限时,全部私网路由数已达系统中私网路由数量上限.
","1.
检查全部私网路由数量.
","RM/4/RCH_ALLVRF6_RT_LMT""RCH_ALLVRF6_RT_LMT","ADDHOSTRT_TBL_LMT","ThenumberofVPN6-Instancesroutesreachedtheupperlimit[paf-vpn-route-limit]inthesystemwhentheupperlimitofroutesintheIPv6routingtableinallinstanceswaschecked.
","4","检查IPv6路由表中路由上限时,全部IPv6私网路由数已达系统中的IPv6私网路由数量上限.
","[paf-vpn-route-limit]:PAF给出的全部私网路由数量上限.
","检查IPv6路由表中路由上限时,全部IPv6私网路由数已达系统中IPv6私网路由数量上限.
","1.
检查全部IPv6私网路由数量.
","RM/4/RCH_MIGP_RT_LMT""RCH_MIGP_RT_LMT","ADDHOSTRT_TBL_LMT","ThenumberofroutesinMIGProutingtablereachedtheupperlimit[migp-route-limit].
","4","MIGP路由表中路由数量已达其上限.
","[migp-route-limit]:MIGP路由表上限.
","MIGP路由表中的路由数量已达其上限.
","RM/4/RCH_PUB_RT_LMT","CFM/4/RST_CFG""RCH_PUB_RT_LMT","ADDHOSTRT_TBL_LMT","ThenumberofIPv4routesforthepublicnetworkreachestheupperlimit[paf-pub-limit],whenthenumberofIPv4routesintheroutingtableischecked.
","4","检查路由表中IPv4路由数量时,IPv4公网路由数已达上限.
","[paf-pub-limit]:PAF定义的IPv4公网路由上限.
","IPv4公网路由数已达上限.
","1.
查看路由是否异常.
2.
考虑删除无效路由.
3.
请确认组网需求,是否配置错误.
4.
请联系华为技术支持工程师.
","RM/4/RCH_PUB6_RT_LMT""RCH_PUB6_RT_LMT","ADDHOSTRT_TBL_LMT","ThenumberofIPv6routesforthepublicnetworkreachestheupperlimit[paf-pub-limit],whenthenumberofIPv6routesintheroutingtableischecked.
","4","检查路由表中IPv6路由数量时,IPv6公网路由数已达上限.
","[paf-pub-limit]:PAF定义的IPv6公网路由上限.
","IPv6公网路由数已达上限.
","RM/3/RPM_ROUT_MAX_LMT","RM/4/RCH_PUB6_RT_LMT""RPM_ROUT_MAX_LMT","ADDHOSTRT_TBL_LMT","Thenumberofpoliciesintheroutepolicymanagementreachedmaximumlimitwhenaprefixlistfilterwascreatedforthespecifiedprefixlistnameandinstance.
","3","为给定的前缀列表名和实例创建前缀列表过滤器时,路由策略管理中策略数量达到最大限制值.
","路由策略管理中策略数量达到阈值.
","无:无","RM/4/RT_NUM_EXCD_WARN","1.
正常运行信息,无需处理.
""RT_NUM_EXCD_WARN","ADDHOSTRT_TBL_LMT","Thenumberofroutesin[vpn-instance-name]was[current-number],whichexceededthealarmthreshold[threshold-value].
(InstanceId=[ULONG],MaximumRouteLimit=[ULONG])","4","指定的IPv4私网实例路由数量超过了告警阈值范围.
","[vpn-instance-name]:VPN实例名.
[threshold-value]:告警阈值.
InstanceId:VPN实例的ID.
MaximumRouteLimit:最大的路由数.
[current-number]:实际的路由数.
","RM/4/RT6_NUM_EXCD_WARN","[vpn-instance-name]:VPN实例名.
[threshold-value]:告警阈值.
InstanceId:VPN实例的ID.
MaximumRouteLimit:最大的路由数.
[current-number]:实际的路由数.
","RM/4/INST_RCH_MAX_RT6_LMT""RT6_NUM_EXCD_WARN","ADDHOSTRT_TBL_LMT","ThenumberofroutesinIPv6[vpn-instance-name]was[current-number],whichexceededthealarmthreshold[threshold-value].
(InstanceId=[ULONG],MaximumRouteLimit=[ULONG])","4","指定的IPv6私网实例路由数量超过了告警阈值范围.
","[vpn-instance-name]:IPv6VPN实例名.
[threshold-value]:告警阈值.
InstanceId:VPN实例的ID.
MaximumRouteLimit:最大的路由数.
[current-number]:实际的路由数.
","RM/3/SMTH_ADDRT_MAX_LMT","[vpn-instance-name]:IPv6VPN实例名.
[threshold-value]:告警阈值.
InstanceId:VPN实例的ID.
MaximumRouteLimit:最大的路由数.
[current-number]:实际的路由数.
","RM/4/INST_RCH_MAXPFXLMT""SMTH_ADDRT_MAX_LMT","ADDHOSTRT_TBL_LMT","ThenumberofroutesintheroutingtablereachedthemaximumwhenaroutewasaddedtotheURTsmoothly.
(DestinationAddress=[STRING])","3","以平滑备份方式向URT中添加一条路由时,路由表中的路由数量已经达到上限.
","平滑时添加路由,路由表已经满.
","添加路由数量过多或派生路由数量过多.
","RM/3/SNDMSG_MEM_SHORT_FAL","CFM/4/RST_CFG""SNDMSG_MEM_SHORT_FAL","ADDHOSTRT_TBL_LMT","ThesystemmemorywasinsufficientwhentheIPmessagewaswrittentothemessagequeue.
","3","向消息队列中写IP消息时,系统内存不足.
","原因1:内存短缺.
原因2:IP消息量太大.
","无:无","RM/4/SYS_RCH_MAX_RT_LMT","IFNET/5/ACOAM_STATE_CHANGE""SYS_RCH_MAX_RT_LMT","ADDHOSTRT_TBL_LMT","Thenumberofroutesreachedupperlimit[paf-route-limit]inthewholesystemwhentheroutelimitintheroutingtablewaschecked.
","4","检查路由表中路由上限时,路由数已达整个系统中的路由数量上限.
","[paf-route-limit]:PAF给出的路由数量上限.
","检查路由限值时,系统中总路由数已达最大值.
","RM/4/SYS_RCH_MAX6_RT_LMT","RM/3/MAX_RPM_RCH""SYS_RCH_MAX6_RT_LMT","ADDHOSTRT_TBL_LMT","ThenumberofIPv6routesreachedtheupperlimit[paf-ipv6-route-limit]inthesystemwhentheupperlimitofroutesintheIPv6URTwaschecked.
","4","检查IPv6URT中路由数量上限时,IPv6路由数量已达整个系统中的IPv6路由数量上限.
","[paf-ipv6-route-limit]:PAF给出的IPv6路由数量上限.
","检查IPv6路由限值时,系统中总IPv6路由数已达最大值.
","1.
检查IPv6路由限值.
","RM/4/URT_RCH_MAX_IPPRFX""URT_RCH_MAX_IPPRFX","ADDHOSTRT_TBL_LMT","Thenumberofprefixesreachedthemaximumprefixlimit[max-prefix-limit]intheroutingtable.
(RoutingTableId=[ULONG])","4","路由表中前缀数量已经到达最大前缀数量限制.
","[max-prefix-limit]:最大前缀限制值.
RoutingTableId:路由表ID.
","添加路由的时候发现路由前缀已经达到最大.
","RSA/6/DESTROY_KEYS","IFNET/5/ACOAM_STATE_CHANGE""RSA","DESTROY_KEYS","Theuserconfirmsthatthekeysneedtobedestroyed.
","6","用户确认销毁密钥.
","执行rsalocal-key-pairdestroy,用户确认销毁密钥.
","无:无","RSA/4/FAIL_READ_FLASH","1.
正常运行信息,无需处理.
""FAIL_READ_FLASH","DESTROY_KEYS","Failedtoreadflash!
","4","读flash失败!
","读flash失败.
","无:无","1.
重新打开文件读密钥.
","RSA/4/FAIL_WRITE_FLASH""FAIL_WRITE_FLASH","DESTROY_KEYS","Failedtowriteflash!
","4","写flash出错!
","密钥保存到flash出错.
","无:无","1.
重新生成主机密钥对或服务器密钥对.
","RSA/3/HOST_PUBKEY_BAK_FAL""HOST_PUBKEY_BAK_FAL","DESTROY_KEYS","Failedtobackuphostpublickey!
","3","主机公钥备份失败!
","将主机密钥保存到存储介质失败.
","无:无","1.
重新输入命令行rsalocal-key-paircreate创建主机密钥对.
","RSA/4/HOSTKEY_BACKUP_ERR""HOSTKEY_BACKUP_ERR","DESTROY_KEYS","FailedtobackupRSAhostencryptionkey!
","4","没能备份RSA主机加密密钥!
","1.
要备份的数据为空.
2.
为备份消息分配内存失败.
3.
发送热备份消息失败.
","无:无","1.
还可以在批量备份时在进行备份,不用处理.
","RSA/4/HOSTKEY_BAK_DEL_ERR""HOSTKEY_BAK_DEL_ERR","DESTROY_KEYS","SucceededindestroyingRSAhostkeyinthemainboard,butfailedtodestroyRSAhostkeyintheslaveboard!
","4","成功销毁主板上的RSA主机密钥,但没能销毁备板上的RSA主机密钥.
","1.
要备份的数据为空.
2.
为备份消息分配内存失败.
3.
发送热备份消息失败.
","无:无","RSA/3/HOSTKEY_DEL_ERR","1.
正常运行信息,无需处理.
""HOSTKEY_DEL_ERR","DESTROY_KEYS","FailedtodestroyRSAhostkey!
","3","销毁RSA主机密钥失败!
","用清零的密钥数据覆盖原来的主机密钥数据失败.
","无:无","1.
重新输入命令行rsalocal-key-pairdestroy销毁主机密钥对.
","RSA/6/HOSTKEY_DEL_SUC""HOSTKEY_DEL_SUC","DESTROY_KEYS","DestroyRSAhostkeysuccessfully.
","6","成功销毁RSA主机密钥.
","销毁RSA主机密钥成功.
","无:无","RSA/3/HOSTKEY_GEN_FAIL","1.
正常运行信息,无需处理.
""HOSTKEY_GEN_FAIL","DESTROY_KEYS","FailedtocreateRSAhostencryptionkey!
","3","没能产生RSA主机加密密钥!
","1.
密钥名长度为0或超过允许的最大值.
2.
密钥位数不在允许范围内.
3.
产生密钥对失败.
4转换为存储格式失败.
","无:无","RSA/6/HOSTKEY_GEN_SUCCESS","RSA/4/HOSTKEY_BACKUP_ERR""HOSTKEY_GEN_SUCCESS","DESTROY_KEYS","CreateRSAhostencryptionkeysuccessfully.
","6","产生RSA主机加密密钥成功.
","RSA/3/HOSTKEY_SAVE_ERR","无:无","RSA/3/HOSTKEY_SAVE_ERR","1.
正常运行信息,无需处理.
""HOSTKEY_SAVE_ERR","DESTROY_KEYS","FailedtosaveRSAhostencryptionkey!
","3","没能保存RSA主机加密密钥!
","将数据写入存储介质失败.
","无:无","RSA/6/KEY_SIZE","RSA/4/HOSTKEY_BACKUP_ERR""KEY_SIZE","DESTROY_KEYS","Theuserinputsthesizeofkey[key-length].
","6","用户输入密钥长度.
","[key-length]:密钥模的长度.
","执行rsalocal-key-paircreate,提示用户输入密钥模的长度,用户输入.
","RSA/6/NOT_DESTROY_KEYS","1.
正常运行信息,无需处理.
""NOT_DESTROY_KEYS","DESTROY_KEYS","Theuserconfirmsthatthekeyscannotbedestroyed.
","6","用户确认不销毁密钥.
","执行rsalocal-key-pairdestroy,用户确认不销毁密钥,即取消此命令操作.
","无:无","RSA/6/NOT_REPLACE_KEYS","1.
正常运行信息,无需处理.
""NOT_REPLACE_KEYS","DESTROY_KEYS","Theuserconfirmsthatthekeyscannotbereplaced.
","6","用户确认不替换原有密钥.
","在hostkey和serverkey存在时,执行rsalocal-key-paircreate命令,对是否替换原有密钥的否认.
","无:无","RSA/6/REPLACE_KEYS","1.
正常运行信息,无需处理.
""REPLACE_KEYS","DESTROY_KEYS","Theuserconfirmsthatthekeysneedtobereplaced.
","6","用户确认替换原有密钥.
","在hostkey和serverkey存在时,执行rsalocal-key-paircreate命令,对是否替换原有密钥的确认.
","无:无","RSA/4/SERVERKEY_BKUP_ERR","1.
正常运行信息,无需处理.
""SERVERKEY_BKUP_ERR","DESTROY_KEYS","FailedtobackupRSAserverencryptionkey!
","4","没能备份RSA服务器加密密钥!
","RSA/3/SERVERKEY_DEL_ERR","无:无","1.
还可以在批量备份时在进行备份,不用处理.
","RSA/4/HOSTKEY_BAK_DEL_ERR""SERVERKEY_DEL_ERR","DESTROY_KEYS","FailedtodestroyRSAserverkey!
","3","没能销毁RSA服务器密钥!
","用清零的密钥数据覆盖原来的服务器密钥数据失败.
","无:无","1.
重新输入命令行rsalocal-key-pairdestroy销毁服务器密钥对.
","RSA/6/SERVERKEY_DEL_SUC""SERVERKEY_DEL_SUC","DESTROY_KEYS","DestroyRSAserverkeysuccessfully.
","6","成功销毁RSA服务器密钥.
","销毁RSA服务器密钥成功.
","无:无","RSA/3/SERVERKEY_GEN_FAIL","1.
正常运行信息,无需处理.
""SERVERKEY_GEN_FAIL","DESTROY_KEYS","FailedtocreateRSAserverencryptionkey!
","3","没能产生RSA服务器加密密钥!
","1.
密钥名长度为0或超过允许的最大值.
2.
密钥位数不在允许范围内.
3.
转换为存储格式失败.
","无:无","1.
重新输入命令行rsalocal-key-paircreate创建服务器密钥对.
","RSA/6/SERVERKEY_GEN_SUC""SERVERKEY_GEN_SUC","DESTROY_KEYS","CreateRSAserverencryptionkeysuccessfully.
","6","产生RSA服务器加密密钥成功.
","RSA/3/SERVERKEY_SAVE_ERR","无:无","RSA/3/SERVERKEY_SAVE_ERR","1.
正常运行信息,无需处理.
""SERVERKEY_SAVE_ERR","DESTROY_KEYS","FailedtosaveRSAserverencryptionkey!
","3","没能保存RSA服务器加密密钥!
","将数据保存到存储介质失败.
","无:无","RSA/3/SERVR_PUBKEY_BAK_FAL","RSA/6/SERVERKEY_GEN_SUC""SERVR_PUBKEY_BAK_FAL","DESTROY_KEYS","Failedtobackupserverpublickey!
","3","服务器公钥备份失败.
","将服务器密钥保存到存储介质失败.
","无:无","RSA/4/SEVEKEY_BAK_DEL_ERR","RSA/6/SERVERKEY_GEN_SUC""SEVEKEY_BAK_DEL_ERR","DESTROY_KEYS","SucceededindestroyingRSAserverkeyinthemainboard,butfailedtodestroyRSAserverkeyintheslaveboard!
","4","成功销毁主板上的RSA服务器密钥,但没能销毁备板上的RSA服务器密钥!
","RSA/6/DELETE_KEY_FILE_OK","无:无","RSA/3/HOSTKEY_DEL_ERR","1.
正常运行信息,无需处理.
""DELETE_KEY_FILE_OK","DESTROY_KEYS","Succeededindeletingfile[STRING].
","6","删除RSA密钥成功.
","[STRING]:RSA密钥名.
","升级前版本:RSA密钥保存于系统存储卡下的hostkey和serverkey文件中,升级后版本:RSA密钥保存于系统NORFLASH下的hostkey和serverkey文件中.
在升级过程中,会将系统存储卡的hostkey和serverkey文件中的RSA密钥存储于系统NORFLASH下的hostkey和serverkey文件中,删除系统存储卡的hostkey和serverkey文件中的RSA密钥.
","SA/3/INITFAIL","1.
正常运行信息,无需处理.
""SA","INITFAIL","Failedtoinitializetheserviceawarenessengine.
(SyslogId=[syslog-id],From=[from],Reason=[reason])","3","SA引擎初始化失败.
","syslog-id:日志序号.
from:日志的来源,产生于哪个平面,可以是IAE平面和管理平面.
reason:SA引擎初始化失败的原因.
可能原因如下:·BasicAPInotregistered:基本接口未注册.
·BasicAPIsregisterfailed:基本接口注册失败.
·Enginealreadyinitialized:引擎已经初始化.
·Failedtodividememory:切分内存失败.
·Getsharedmemorysizefailed:获取共享内存大小失败.
·Nosharedmemoryspecified:未指定共享内存.
·Memoryisnotenough:内存不足.
·Associationtablescopeistoolarge:关联表规模过大.
","请参见日志参数里SA引擎初始化失败的原因.
","SA/6/INITSUCC","BGP/6/RECV_NOTIFY""INITSUCC","INITFAIL","Initializedtheserviceawarenessenginesuccessfully.
(SyslogId=[syslog-id],From=[from])","6","SA引擎初始化成功.
","syslog-id:日志序号.
from:日志的来源,产生于哪个平面,可以是IAE平面和管理平面.
","系统初始化时,SA引擎进行了初始化.
","SECIF/6/STREAM","1.
正常运行信息,无需处理.
""SECIF","STREAM","InLastFiveMinutesStreamStatisticis:[interface-index]-[interface-name],STATE-[interface-state],IN-[rate1],OUT-[rate2].
","6","统计近5分钟,物理接口的状态、输入流量速率和输出流量速率.
","interface-index:接口编号.
interface-name:接口名称.
interface-state:接口的链路层协议状态,U代表Up,D代表Down.
rate1:输入流量(单位:kbps).
rate2:输出流量(单位:kbps).
","每五分钟定时统计接口流量信息.
","SECLOG/6/SESSION_BUILT","FTPS/4/FILE_OVERWRITE""SECLOG","SESSION_BUILT","IPVer=[ip-version],Protocol=[protocol],SourceIP=[source-ip],DestinationIP=[destination-ip],SourcePort=[source-port],DestinationPort=[destination-port],SourceNatIP=[source-nat-ip],SourceNatPort=[source-nat-port],DestinationNatIP=[destination-nat-ip],DestinationNatPort=[destination-nat-port],BeginTime=[begin-time],SourceVpnID=[source-vpn-id],DestinationVpnID=[destination-vpn-id],UserName=[user-name]","6","向日志服务器发送新建会话的信息.
","ip-version:IP版本号.
protocol:会话协议.
source-ip:源地址.
destination-ip:目的地址.
source-port:源端口.
destination-port:目的端口.
source-nat-ip:NAT转换后的源地址.
source-nat-port:NAT转换后的端口.
destination-nat-ip:NAT转换后的目的地址.
destination-nat-port:NAT转换后的目的端口.
begin-time:新建会话的起始时间.
source-vpn-id:源VPN实例ID.
destination-vpn-id:目的VPN实例ID.
user-name:用户名.
","主动发送新建会话日志.
","SECLOG/4/SESSION_DENY","1.
正常运行信息,无需处理.
""SESSION_DENY","SESSION_BUILT","IPVer=[ip-version],Protocol=[protocol],SourceIP=[source-ip],DestinationIP=[destination-ip],SourcePort=[source-port],DestinationPort=[destination-port],SourceVpnID=[source-vpn-id],DestinationVpnID=[destination-vpn-id]discard-type","4","向日志服务器发送丢包信息.
","ip-version:IP版本号.
protocol:会话协议.
source-ip:源地址.
destination-ip:目的地址.
source-port:源端口.
destination-port:目的端口.
source-vpn-id:源VPN实例ID.
destination-vpn-id:目的VPN实例ID.
discard-type:丢包类型.
","报文不符合包过滤规则产生会话丢包.
","SECLOG/6/SESSION_PREIODICALLY","1.
正常运行信息,无需处理.
""SESSION_PREIODICALLY","SESSION_BUILT","IPVer=[ip-version],Protocol=[protocol],SourceIP=[source-ip],DestinationIP=[destination-ip],SourcePort=[source-port],DestinationPort=[destination-port],SourceNatIP=[source-nat-ip],SourceNatPort=[source-nat-port],DestinationNatIP=[destination-nat-ip],DestinationNatPort=[destination-nat-port],BeginTime=[begin-time],EndTime=[end-time],SendPkts=[send-packets],SendBytes=[send-bytes],RcvPkts=[received-packets],RcvBytes=[received-bytes],SourceVpnID=[source-vpn-id],DestinationVpnID=[destination-vpn-id],UserName=[user-name]","6","向日志服务器定时发送日志信息.
","ip-version:IP版本号.
protocol:会话协议.
source-ip:源地址.
destination-ip:目的地址.
source-port:源端口.
destination-port:目的端口.
source-nat-ip:NAT转换后的源地址.
source-nat-port:NAT转换后的端口.
destination-nat-ip:NAT转换后的目的地址.
destination-nat-port:NAT转换后的目的端口.
begin-time:会话的起始时间.
end-time:会话的终止时间.
send-packets:发送的报文数.
send-bytes:发送的字节数.
received-packets:接收的报文数.
received-bytes:接收的字节数.
source-vpn-id:源VPN实例ID.
destination-vpn-id:目的VPN实例ID.
user-name:用户名.
","定时主动发送日志信息.
","SECLOG/6/SESSION_TEARDOWN","1.
正常运行信息,无需处理.
""SESSION_TEARDOWN","SESSION_BUILT","IPVer=[ip-version],Protocol=[protocol],SourceIP=[source-ip],DestinationIP=[destination-ip],SourcePort=[source-port],DestinationPort=[destination-port],SourceNatIP=[source-nat-ip],SourceNatPort=[source-nat-port],DestinationNatIP=[destination-nat-ip],DestinationNatPort=[destination-nat-port],BeginTime=[begin-time],EndTime=[end-time],SendPkts=[send-packets],SendBytes=[send-bytes],RcvPkts=[received-packets],RcvBytes=[received-bytes],SourceVpnID=[source-vpn-id],DestinationVpnID=[destination-vpn-id],PolicyName=[policy-name],UserName=[user-name]","6","向日志服务器发送老化会话的信息.
","ip-version:IP版本号.
protocol:会话协议.
source-ip:源地址.
destination-ip:目的地址.
source-port:源端口.
destination-port:目的端口.
source-nat-ip:NAT转换后的源地址.
source-nat-port:NAT转换后的端口.
destination-nat-ip:NAT转换后的目的地址.
destination-nat-port:NAT转换后的目的端口.
begin-time:会话的起始时间.
end-time:会话的终止时间.
send-packets:发送的报文数.
send-bytes:发送的字节数.
received-packets:接收的报文数.
received-bytes:接收的字节数.
source-vpn-id:源VPN实例ID.
destination-vpn-id:目的VPN实例ID.
policy-name:安全策略名称.
user-name:用户名.
","主动发送老化会话的信息.
","SECLOG/6/SESSION_URL","1.
正常运行信息,无需处理.
""SESSION_URL","SESSION_BUILT","IPVer=[ip-version],Protocol=[protocol],SourceIP=[source-ip],DestinationIP=[destination-ip],SourcePort=[source-port],DestinationPort=[destination-port],SourceNatIP=[source-nat-ip],SourceNatPort=[source-nat-port],DestinationNatIP=[destination-nat-ip],DestinationNatPort=[destination-nat-port],BeginTime=[begin-time],EndTime=[end-time],SendPkts=[send-pkts],SendBytes=[send-bytes],RcvPkts=[rcv-pkts],RcvBytes=[rcv-bytes],SourceVpnID=[source-vpn-id],DestinationVpnID=[destination-vpn-id],Page=[page],Host=[host]","6","URL日志信息.
","ip-version:IP版本号.
protocol:会话协议.
source-ip:源地址.
destination-ip:目的地址.
source-port:源端口.
destination-port:目的端口.
source-nat-ip:nat后源地址.
source-nat-port:nat后源端口.
destination-nat-ip:nat后目的地址.
destination-nat-port:nat后目的端口.
begin-time:新建会话起始时间.
end-time:会话终止时间.
send-pkts:正向会话收报文数.
send-bytes:正向报文收字节数.
rcv-pkts:反向会话收报文数.
rcv-bytes:反向会话收报文数.
source-vpn-id:源VPN实例ID.
destination-vpn-id:目的VPN实例ID.
page:网址.
host:主机.
","SHELL/5/CMDRECORD","ip-version:IP版本号.
protocol:会话协议.
source-ip:源地址.
destination-ip:目的地址.
source-port:源端口.
destination-port:目的端口.
source-nat-ip:nat后源地址.
source-nat-port:nat后源端口.
destination-nat-ip:nat后目的地址.
destination-nat-port:nat后目的端口.
begin-time:新建会话起始时间.
end-time:会话终止时间.
send-pkts:正向会话收报文数.
send-bytes:正向报文收字节数.
rcv-pkts:反向会话收报文数.
rcv-bytes:反向会话收报文数.
source-vpn-id:源VPN实例ID.
destination-vpn-id:目的VPN实例ID.
page:网址.
host:主机.
","1.
正常运行信息,无需处理.
""SHELL","CMDRECORD","Recordedcommandinformation.
(Task=[string],Ip=[string],VpnName=[STRING],User=[string],AuthenticationMethod="[STRING]",Command="[string]")","Whenbeingaskedwhethertocommitthecommand"undobulk-statenable",theuserchoseN.
","记录用户命令.
·如果命令执行成功,则只记录日志SHELL/5/CMDRECORD.
·如果命令执行失败,则会记录日志SHELL/5/CMDRECORD和SHELL/5/CMDRECORDFAILED.
","Task:任务名称.
Ip:IP地址.
当设备无法获取IP地址时,使用"**"记录.
例如通过Console口或Aux口登录用户的场景.
VpnName:VPN实例名称.
User:用户名称.
当无法获取用户名时,使用"**"记录.
例如通过密码认证登录用户的场景.
AuthenticationMethod:用户的认证方式.
Command:命令.
","记录用户命令.
","SHELL/5/CMDRECORDFAILED","1.
正常运行信息,无需处理.
""CMDRECORDFAILED","CMDRECORD","Recordedcommandinformation.
(Task=[string],Ip=[string],VpnName=[STRING],User=[string],AuthenticationMethod="[STRING]",Command="[string]",Result=[string])","Whenbeingaskedwhethertocommitthecommand"undobulk-statenable",theuserchoseN.
","记录命令执行失败的信息.
","Task:任务名称.
例如:·HTPN表示用户在Web上的操作·WC0表示用户在Web上的CLI控制台操作·co0表示用户在串口上的操作·VTY0,VTY1,VTY2.
.
.
.
表示在Tlenet或SSH上的操作Ip:IP地址.
当设备无法获取IP地址时,使用"**"记录.
例如通过Console口或Aux口登录用户的场景.
VpnName:VPN实例名称.
User:用户名称.
当设备无法获取用户名时,使用"**"记录.
例如通过密码认证登录用户的场景.
AuthenticationMethod:用户的认证方式.
Command:命令.
Result:命令执行的结果,包括ExecutionFailure和AuthenticationFailure.
","命令执行失败.
","SHELL/6/CMDCONFIRM_NOPROMPT","1.

正常运行信息,无需处理.
""CMDCONFIRM_NOPROMPT","CMDRECORD","Recordcommandinformation.
(Task=[Task],IP=[IP],VpnName=[VpnName],User=[User],Command="[Command]",UserInput=[UserInput])","6","记录交互命令的确认信息.
","Task:任务名,如VTn、JOB等.
IP:IP地址.
当设备无法获取IP地址时,使用"**"记录.
例如通过Console口或Aux口登录用户的场景.
VpnName:VPN实例的名称.
User:用户名称.
当设备无法获取用户名时,使用"**"记录.
例如通过密码认证登录用户的场景.
Command:用户执行的命令.
UserInput:用户的选择,包括Y、N.
","用户执行交互式命令.
","SHELL/6/CMDCONFIRM_RECORD","1.
正常运行信息,无需处理.
""CMDCONFIRM_RECORD","CMDRECORD","Whenbeingaskedwhethertoexecutethecommand"[command]",theuserchose[Y/N].
(Task=[Task],IP=[IP],VpnName=[VpnName],User=[User])","6","当决定是否继续执行关闭全局开关类命令时,用户选择了Y或者N进行确认.
","command:命令行.
Y/N:用户确认是否执行命令行:·Y:执行命令行·N:不执行命令行Task:任务ID.
Ip:IP地址.
当设备无法获取IP地址时,使用"**"记录.
例如通过Console口或Aux口登录用户的场景.
VpnName:VPN实例的名称.
User:用户名称.
当设备无法获取用户名时,使用"**"记录.
例如通过密码认证登录用户的场景.
","关闭全局开关类命令(特性或功能去使能)时,系统会输出提示信息提示用户确认是否继续.
","SHELL/6/CMDCONFIRM_UNIFORMRECORD","1.

正常运行信息,无需处理.
""CMDCONFIRM_UNIFORMRECORD","CMDRECORD","Recordcommandinformation.
(Task=[Task],IP=[IP],VpnName=[VpnName],User=[User],Command="[Command]",PromptInfo="[PromptInfo]",UserInput=[UserInput])","6","Task:任务名,如VTn、JOB等.
IP:IP地址.
当设备无法获取IP地址时,使用"**"记录.
例如通过Console口或Aux口登录用户的场景.
VpnName:VPN实例的名称.
User:用户名称.
当设备无法获取用户名时,使用"**"记录.
例如通过密码认证登录用户的场景.
Command:用户执行的命令.
PromptInfo:输出到终端屏幕的提示信息.
UserInput:用户的选择,包括Y、N.
","Task:任务名,如VTn、JOB等.
IP:IP地址.
当设备无法获取IP地址时,使用"**"记录.
例如通过Console口或Aux口登录用户的场景.
VpnName:VPN实例的名称.
User:用户名称.
当设备无法获取用户名时,使用"**"记录.
例如通过密码认证登录用户的场景.
Command:用户执行的命令.
UserInput:用户的选择,包括Y、N.
","SHELL/6/DISPLAY_CMDRECORD","SHELL/6/CMDCONFIRM_RECORD","1.
正常运行信息,无需处理.
""DISPLAY_CMDRECORD","CMDRECORD","Recordeddisplaycommandinformation.
(Task=[string],Ip=[string],VpnName=[STRING],User=[string],AuthenticationMethod="[STRING]",Command="[string]")","6","记录用户display命令.
","Task:任务ID.
Ip:IP地址.
当设备无法获取IP地址时,使用"**"记录.
例如通过Console口或Aux口登录用户的场景.
VpnName:指定VPN实例的名称.
User-name:用户名称.
当设备无法获取用户名时,使用"_system_"记录.
例如通过密码认证登录的场景.
AuthenticationMethod:用户的认证方式.
Command:命令.
","SHELL/4/LOGINFAILED","SHELL/5/CMDRECORDFAILED","1.
正常运行信息,无需处理.
""Failedtologin.
(Ip=[Ip],UserName=[UserName],Times=[Times],AccessType=[AccessType],VpnName=[VpnName])","CMDRECORD","Failedtologin.
(UserName="[string]",IpAddress=[string],VpnInstanceName="[string]",Reason="[string]")","4","登录失败.
","Ip:IP地址.
当设备无法获取IP地址时,使用"**"记录.
例如通过Console口或Aux口登录用户的场景.
UserName:用户名.
当设备无法获取用户名时,使用"**"记录.
例如通过密码认证登录用户的场景.
Times:登录失败次数.
AccessType:登录类型.
VpnName:VPN实例的名称.
","登录的用户名或密码错误.
","SHELL/5/LOGIN","FTPS/5/LOGIN_OK""LOGIN","CMDRECORD","Theusersucceededinlogginginto[UserIndex].
(UserType=[STRING],UserName=[STRING],AuthenticationMethod="[STRING]",Ip=[STRING],VpnName=[STRING])","Whenbeingaskedwhethertocommitthecommand"undobulk-statenable",theuserchoseN.
","记录登录用户名和IP地址.
","UserIndex:用户索引.
UserType:用户类型.
UserName:用户名称.
当设备无法获取用户名时,用户名显示为空.
例如通过密码认证登录用户的场景.
AuthenticationMethod:用户的认证方式.
Ip:用户IP地址.
当设备无法获取IP地址时,IP地址显示为空.
例如通过Console口或Aux口登录用户的场景.
VpnName:VPN实例名称.
","用户登录.
","SHELL/5/LOGOUT","1.
正常运行信息,无需处理.
""LOGOUT","CMDRECORD","Theusersucceededinloggingoutof[UserIndex].
(UserType=[STRING],UserName=[STRING],Ip=[STRING],VpnName=[STRING])","Whenbeingaskedwhethertocommitthecommand"undobulk-statenable",theuserchoseN.
","用户退出,记录用户名和IP地址.
","UserIndex:用户索引.
UserType:用户类型.
UserName:用户名称.
Ip:用户IP地址.
VpnName:VPN实例名称.
","用户退出.
","SHELL/4/OVERWRITE_EXEC","1.
正常运行信息,无需处理.
""OVERWRITE_EXEC","CMDRECORD","Theuserchose[Y/N]whendecidingwhethertooverwritetheexistingfile.
","4","执行命令前用户确认是否覆盖已有文件.
","SHELL/5/SETPASS_FAIL_FIRSTLOGIN","CFM/4/SAVE","SHELL/5/SETPASS_FAIL_FIRSTLOGIN","1.

正常运行信息,无需处理.
""SETPASS_FAIL_FIRSTLOGIN","CMDRECORD","Failedtosetpasswordwhenloginfirstly.
","Whenbeingaskedwhethertocommitthecommand"undobulk-statenable",theuserchoseN.
","首次登录设置密码失败.
","首次登录时,如果用户输入的密码不符合复杂度检查,设置密码失败,记录该日志.
","无:无","1.
请检查密码是否符合复杂度检查.
·如果是,请执行步骤2.
·如果不是,请重新输入符合复杂度的密码.
如果密码设置还是不成功,请执行步骤2.
2.
请收集日志信息和配置信息,并联系华为技术支持工程师.
","SHELL/5/TIMEOUT""TIMEOUT","CMDRECORD","[user-name]loginfrom[ip-address]istimeout.
","Whenbeingaskedwhethertocommitthecommand"undobulk-statenable",theuserchoseN.
","记录登录超时退出信息.
","user-name:用户名.
ip-address:IP地址.
","用户登录后指定时间内无操作.
","SHELL/6/CMDCONFIRM_CHANGEPWDCHOOSEINFO","1.
正常运行信息,无需处理.
""CMDCONFIRM_CHANGEPWDCHOOSEINFO","CMDRECORD","Theuserchose[STRING]whendecidingwhethertochangepassword.
(User=[STRING],IP=[STRING],VpnName=[STRING])","6","记录提示用户修改旧密码时的选择是Y还是N.
","User:用户名.
IP:用户登录IP地址.
VpnName:VPN的实例名.
","提示用户修改旧密码时,当用户选择Y或N时,日志中记录此时用户输入的Y或N的动作.
","SHELL/4/LOGIN_FAIL_FOR_INPUT_TIMEOUT","1.

正常运行信息,无需处理.
""LOGIN_FAIL_FOR_INPUT_TIMEOUT","CMDRECORD","Failedtologinduetotimeout.
(Ip=[STRING],UserName=[STRING],Times=[ULONG],AccessType=[STRING],VpnName=[STRING])","4","用户由于输入用户名或密码超时导致登录失败.
","Ip:IP地址.
UserName:用户名称.
Times:登录失败次数.
AccessType:用户类型.
VpnName:VPN实例的名称.
","1.
用户重新登录.
","Ip:IP地址.
UserName:用户名称.
Times:登录失败次数.
AccessType:用户类型.
VpnName:VPN实例的名称.
","SINDEX/6/INDEX_NO_INTERFACE""SINDEX","INDEX_NO_INTERFACE","NoShortIFIndexcanbeallocatedtothecurrentinterface.
","6","没有索引分配给当前接口.
","SINDEX/4/INDEX_PADFILE_ERROR","无:无","SINDEX/4/INDEX_PADFILE_ERROR","1.
正常运行信息,无需处理.
""INDEX_PADFILE_ERROR","INDEX_NO_INTERFACE","DatainthePDFfileisabnormal.
","4","PDF文件数据异常.
","1.
执行命令displaydiagnostic-information收集系统信息.
2.
请联系华为技术支持工程师.
3.
结束.
","无:无","1.
执行命令displaydiagnostic-information收集系统信息.
2.
请联系华为技术支持工程师.
3.
结束.
","SNMP/4/AR_PAF_FAILED""SNMP","AR_PAF_FAILED","FailedtoreadPAForLicense.
(ErrCode=[ULONG])","4","初始化时,读取PAF或License失败.
","ErrCode:读取PAF或者License失败的错误码.
","在底层读取PAF或License中的参数时发生错误","SNMP/6/SNMP_CNFM_CHANGEUDPORT","CFM/4/RST_CFG""SNMP_CNFM_CHANGEUDPORT","AR_PAF_FAILED","Whenbeingaskedwhethertoexecutethecommand"[command]",theuserchose[Y/N].
","6","当提示用户是否执行命令时,用户选择了[Y/N].
","[command]:表示用户执行的命令snmp-agentudp-port.
[Y/N]:表示用户选择是否执行该命令[Y/N].
","执行命令前,需要用户确认是否执行该命令.
","SNMP/6/CNFM_VERSION_DISABLE","1.
正常运行信息,无需处理.
""CNFM_VERSION_DISABLE","AR_PAF_FAILED","Theuserchose[Y/N]whendecidingwhethertodisableallSNMPversions.
","6","用户确认是否关闭所有的SNMP版本.
","[Y/N]:表示用户输出的确认字符.
·Y:表示确认需要关闭所有的SNMP版本.
·N:表示确认不需要关闭所有的SNMP版本.
","执行命令前用户需要确认是否执行.
","SNMP/4/SNMP_FAIL","1.
正常运行信息,无需处理.
""SNMP_FAIL","AR_PAF_FAILED","FailedtologinthroughSNMP.
(Ip=[STRING],Times=[ULONG],Reason=[STRING],VPN=[STRING])","4","SNMP登录失败,记录该用户的IP地址和登录次数.
","Ip:源IP地址.
Times:登录失败的次数.
Reason:登录失败的原因.
·theversionwasincorrect:SNMP的版本号错误.
·thepacketwastoolarge:SNMP报文长度过大.
·themessageswasfailedtobeaddedtothemessagelist:加入SNMP消息队列失败.
·decodedPDUerror:报文解码失败.
·thecommunitywasincorrect:团体名不正确.
·theACLfilterfunction:SNMP报文被ACL功能过滤.
·thecontextnamewasincorrect:contextname信息错误.
·authorizationfailed:授权失败,Set操作使用的团体名或用户的权限不足.
·accessdenied:拒绝访问,Set操作的MIB节点不在视图权限范围内.
VPN:VPN实例名.
","详见日志信息中登录失败的原因.
","1.
原因1:SNMP的版本号错误.
请执行snmp-agentsys-info命令修改SNMP的版本号.
2.
原因2:SNMP报文长度过大.
请执行snmp-agentpacketmax-size命令增大代理能接收和发送的SNMP消息包的最大值.
3.
原因3:加入SNMP消息队列失败.
请降低网管请求报文的发送速率.
4.
原因4:报文解码失败.
请修改网管请求报文中的引擎ID.
5.
原因5:团体名不正确.
请执行snmp-agentcommunity命令配置正确的团体名.
6.
原因6:SNMP报文被ACL功能过滤.
请执行snmp-agentacl命令修改SNMP的访问控制列表.
7.
原因7:contextname信息错误.
请将contextname修改为空或短横线.
8.
原因8:授权失败,Set操作使用的团体名或用户的权限不足.
确认SNMP团体名或用户权限是否正确,并执行snmp-agentcommunity或snmp-agentusm-user修改权限.
9.
原因9:拒绝访问,Set操作的MIB节点不在视图权限范围内.
检查设备的SNMP视图配置是否正确,并执行snmp-agentmib-view命令重新配置MIB视图信息.
","SNMP/4/SNMP_IPLOCK""SNMP_IPLOCK","AR_PAF_FAILED","ThesourceIPwaslockedbecauseofthefailureofloginthroughSNMP.
(SourceIP=[STRING],VPN=[STRING])","4","由于SNMP登录失败,源IP锁定.
","SourceIP:源IP地址.
VPN:VPN实例名.
","网管连接设备时,认证失败.
","1.
检查源IP对应的团体字或者V3用户名、密码是否正确.
","SNMP/4/SNMP_IPUNLOCK""SNMP_IPUNLOCK","AR_PAF_FAILED","ThesourceIPwasunlocked.
(SourceIP=[STRING],VPN=[STRING])","4","SNMP登录成功,源IP解锁.
","SNMP/4/SNMP_LOCK_FULL","网管连接设备时,认证失败.
","1.
检查源IP对应的团体字或者V3用户名、密码是否正确.
","1.
正常运行信息,无需处理.
""SNMP_LOCK_FULL","AR_PAF_FAILED","SNMPlockqueuehasbeenfull.
","4","被锁定的认证失败用户列表已满.
","大量用户在5分钟内访问设备,且认证失败.
","无:无","1.
查看被锁定的认证失败用户是否存在攻击源信息,并通过防火墙等方式过滤非法的攻击源信息.
","SNMP/4/SNMP_MIB_SET""SNMP_MIB_SET","AR_PAF_FAILED","MIBnodeset.
(UserName=[STRING],SourceIP=[STRING],Version=[STRING],RequestId=[ULONG],[STRING],VPN=[STRING])","4","对MIB节点设置操作.
","UserName:用户名.
·对于SNMPv1和SNMPv2c版本,当未配置团体名别名时,UserName是团体名的密文形式.
当配置了团体名别名时,UserName是团体名别名.
·对于SNMPv3版本,UserName是USM(UserSecurityMode)用户的密文形式.
SourceIP:源IP地址.
Version:版本信息.
RequestId:请求ID.
[STRING]:Set请求中节点的OID和值.
对字符串类型节点,以十六进制显示;对密码类节点,值显示为******.
如果Set请求中节点太多,在一条日志中显示不完,则分成多条Set日志显示.
对于OID字符串长度超过512字节,或者OID+value字符串长度超过1024字节的情况,在日志中进行截断显示.
VPN:VPN实例名.
","对一个节点进行set操作时记录的信息.
","SNMP/4/SNMP_MIB_SET_FAILED","1.
正常运行信息,无需处理.
""SNMP_MIB_SET_FAILED","AR_PAF_FAILED","MIBnodesetfailure.
(UserName=[STRING],SourceIP=[STRING],Version=[STRING],RequestId=[ULONG],ErrorStatus=[ULONG],ErrorIndex=[ULONG],[STRING],VPN=[STRING])","4","对MIB节点设置操作失败.
","UserName:用户名.
SourceIP:源IP地址.
Version:版本信息.
RequestId:请求ID.
ErrorStatus:错误状态信息.
包括:·0:noError·1:tooBig·2:noSuchName·3:badValue·4:readOnly·5:genError·6:noAccess·7:wrongType·8:wrongLength·9:wrongEncoding·10:wrongValue·11:noCreation·12:inconsistentValue·13:resourceUnavailable·14:commitFailed·15:undoFailed·16:authorizationError·17:notWritable·18:inconsistentNameErrorIndex:设置失败的绑定变量索引号.
该日志中会打印网管要求设置的所有变量,例如当第5个设置变量设置失败时,ErrorIndex为5.
[STRING]:Set请求中节点的OID和值.
对字符串类型节点,以十六进制显示;对密码类节点,值显示为******.
如果Set请求中节点太多,在一条日志中显示不完,则分成多条Set日志显示.
对于OID字符串长度超过512字节,或者OID+value字符串长度超过1024字节的情况,在日志中进行截断显示.
VPN:VPN实例名.
","对一个节点进行set操作失败时记录的信息.
","SNMP/4/SNMP_ALLUNLOCK","1.
正常运行信息,无需处理.
""SNMP_ALLUNLOCK","AR_PAF_FAILED","Alllocksareunlocked.
","4","被锁定的认证失败用户全部解锁.
","将所有被锁定的认证失败用户列表清空.
","无:无","SNMP/6/TRAPCMDRECORD_YES","1.
正常运行信息,无需处理.
""TRAPCMDRECORD_YES","AR_PAF_FAILED","Whenbeingaskedwhethertocommitthecommand"[STRING]",theuserchoseY.
","6","操作SNMPTrap全局开关命令时,输出提示信息请用户确认是否继续,用户选择YES.
","STRING:需要用户确认的命令.
","操作SNMPTrap全局开关命令,输出确认信息时选择YES.
","SNMP/6/TRAPCMDRECORD_NO","1.
正常运行信息,无需处理.
""TRAPCMDRECORD_NO","AR_PAF_FAILED","Whenbeingaskedwhethertocommitthecommand"[STRING]",theuserchoseN.
","6","操作SNMPTrap全局开关命令时,输出提示信息请用户确认是否继续,用户选择NO.
","操作SNMPTrap全局开关命令,输出确认信息时选择NO.
","操作SNMPTrap全局开关命令,输出确认信息时选择YES.
","SNMPADAPT/4/PUTFILEFAIL","1.
正常运行信息,无需处理.
""SNMPADAPT","PUTFILEFAIL","Failedtosendafiletoaserver.
(User=[user-name],FileName=[file-name],ServerIP=[ip-addr],ServerType=[server-type])","4","向服务器发送特征库文件失败.
","user-name:管理员名称.
file-name:文件名.
ip-addr:服务器IP地址.
server-type:服务器类型.
","·配套的SFTP服务器路由不可达.
·SFTP服务器没有开启.
·配置的SFTP的用户名和密码不正确.
","1.
检查NIP到SFTP服务器的路由是否可达.
2.
检查SFTP服务器是否开启,如果没有开启,请开启.
3.
检查SFTP的用户名和密码是否设置正确.
","SNMPADAPT/6/PUTFILESUCC""PUTFILESUCC","PUTFILEFAIL","Succeededinsendingafiletoaserver.
(User=[user-name],FileName=[file-name],ServerIP=[ip-addr],ServerType=[server-type])","6","向服务器发送特征库文件成功.
","SOCKET/4/ASYNACCEPTFAIL","·配套的SFTP服务器路由不可达.
·SFTP服务器没有开启.
·配置的SFTP的用户名和密码不正确.
","SOCKET/4/ASYNACCEPTFAIL","1.
正常运行信息,无需处理.
""SOCKET","ASYNACCEPTFAIL","Failedtoallocatethefiledescriberforthesubsocketwhenacceptwascalledtoacceptincomingconnectionrequest.
(Time=[ULONG],TaskName=[STRING],TaskId=[ULONG],SocketId=[ULONG],ErrorCode=[LONG])","4","调用accept函数接收连接请求时,无法为子套接口分配文件描述符.
","Time:日志产生的时间.
TaskName:任务名.
TaskId:任务号.
SocketId:套接口ID.
ErrorCode:错误码(-101、-24、-55).
","原因1:由于系统可用内存不足(内存被用完或即将用完),TCP侦听套接口无法接受来自客户端的建立连接请求,连接建立失败.
原因2:当前任务下套接口数量超过系统允许的上限,不能再为套接口分配文件描述符,连接建立失败.
","1.
针对可用内存不足的情况:如果可能,取消一些不必要的、较消耗内存的应用.
2.
针对文件描述符被耗尽的情况:如果可能,取消一些会占用大量文件描述符的应用,释放出足够的文件描述符供当前应用使用.
","SOCKET/1/BINDPEERIP""BINDPEERIP","ASYNACCEPTFAIL","FailedtobindthepeerIPbecauseasocketwithsamestatealreadyexisted.
","Licenseexceedstheauthorizedperiodandthetrialperiod!
","绑定对端地址失败,因为已存在一个和当前套接口状态相同的套接口.
","原因1:重复设置同一对端地址.
原因2:系统中存在一个本端地址、本端端口号、远端地址、远端端口号、VPN索引和待设置套接口完全相同的套接口.
","无:无","1.
产生该日志是由于系统出现了某种不可预知的意外,这将导致相应的路由协议不再可用.
此时请首先取消路由协议然后重新使能.
","SOCKET/4/CANTGETLSTNSOCK""CANTGETLSTNSOCK","ASYNACCEPTFAIL","FailedtoobtaintheIDofthelisteningsocket.
(TaskId=[ULONG],SocketId=[ULONG],ErrorCode=[LONG])","4","无法获得侦听socketID.
","TaskId:任务号.
SocketId:套接口ID.
ErrorCode:错误码(-22、-107).
","系统出现了软件级的错误,无法根据任务号找到相应的任务控制块,或者,无法根据文件描述符找到相应的套接口.
只有在及其极端的情况下才会产生这种日志,可以近似地认为这种错误不会发生,因为概率实在太小.
","SOCKET/4/EXCEEDMAXQLEN","CFM/4/RST_CFG""EXCEEDMAXQLEN","ASYNACCEPTFAIL","Thenumberofmessagesintheasynchronousmessagequeuewasgreaterthanthemessageupperlimit.
(Time=[ULONG],TaskName=[STRING],TaskId=[ULONG],SocketId=[ULONG],ErrorCode=[LONG])","4","当前异步消息队列的消息个数大于此消息队列允许的最大消息个数.
","Time:日志产生的时间.
TaskName:任务名.
TaskId:任务号.
SocketId:套接口ID.
ErrorCode:错误码(-8).
","每个异步套接口拥有一个队列来接收消息,此条日志表示这个消息队列被填满,无法再接受新的消息.
进程读消息的速度过慢,满于消息产生的速度.
表现方式通常是:网络上突发大量的数据包导致处理器繁忙,无法及时处理收到的消息,消息队列被填满,收到的数据被丢弃.
","1.

尝试降低处理器负荷,取消一些不必要却消耗处理器时间的进程.
2.
如果可能,等待处理器空闲,重新配置相应任务.
3.
请联系华为技术支持工程师.
","SOCKET/6/FGETVPNNAME""FGETVPNNAME","ASYNACCEPTFAIL","ThecurrentsocketfailedtoobtaintheVPNname.
(ErrorCode=[ULONG])","6","当前socket获取VPN名字失败.
","ErrorCode:错误码.
具体情况如下4:输入参数非法.
5:VRF名不存在.
7:VRF处于非活动状态.
","套接口被关闭,记录被关闭套接口的VPN信息,但在获取操作时出现异常,无法获取套接口相应的VPN信息.
","SOCKET/6/LSTNASYNQUEINFO","1.

正常运行信息,无需处理.
""LSTNASYNQUEINFO","ASYNACCEPTFAIL","Theverboseinformationaboutthecurrentasynchronousqueueinlisteningstatewasdisplayed.
(Read=[ULONG],Write=[ULONG],Connect=[ULONG],Close=[ULONG],PeerClose=[ULONG],Accept=[ULONG],KeepAliveDown=[ULONG],Crammedat:[ULONG]:[ULONG]:[ULONG](Hour:Minute:Seconds),LostMessage=[ULONG],MessageType=[ULONG])","6","当前侦听阶段异步队列详细信息.
","Read:Read消息个数.
Write:Write消息个数.
Connect:Connect消息个数.
Close:Close消息个数.
PeerClose:Peerclose消息个数.
Accept:Accept消息个数.
KeepAliveDown:Keepalivedown消息个数.
Crammedat:此异步消息队列被填满的时间.
格式为时:分:秒.
LostMessage:丢失消息个数MessageType:被丢弃消息的类型.
有七种情况.
1:Read.
2:Write.
3:Connect.
4:Close.
5:Accept.
6:PeerClose.
7:KeepAliveDown.
","因某种原因导致套接口被关闭,记录被关闭TCP侦听套接口的异步消息队列使用情况.
","SOCKET/6/SGETVPNNAME","1.

正常运行信息,无需处理.
""SGETVPNNAME","ASYNACCEPTFAIL","ThecurrentsocketsucceededtoobtaintheVPNname.
(VPNName=[STRING])","6","当前socket成功获取到了VPN名字.
","VPNName:VPN实例名.
","套接口被关闭,记录被关闭套接口的VPN信息.
","SOCKET/4/SO_ACCEPTCFAIL","1.
正常运行信息,无需处理.
""SO_ACCEPTCFAIL","ASYNACCEPTFAIL","TheerrorcodeofSO_Acceptwasreturned.
(Time=[ULONG],TaskName=[STRING],TaskId=[ULONG],SocketId=[ULONG],ErrorCode=[LONG])","4","SO_Accept返回错误.
","Time:日志产生的时间.
TaskName:任务名.
TaskId:任务号.
SocketId:套接口ID.
ErrorCode:错误码(-55).
","由于系统可用内存不足(内存被用完或即将用完),TCP侦听套接口无法接受来自客户端的建立连接请求,连接建立失败.
","SOCKET/6/SOCKCLOSED","IFNET/5/ACOAM_STATE_CHANGE""SOCKCLOSED","ASYNACCEPTFAIL","Thecurrentsocketwasclosed.
(ProtocolName=[STRING],Cause=[STRING])","6","当前socket被关闭.
","ProtocolName:协议号.
具体情况如下1.
RAWLINK2.
RAWIP3.
TCP4.
UDPCause:触发原因.
具体情况如下1.
Applicationclosedsocket2.
Receivedresetfragment3.
Retransfertimeout4.
Keepalivetimeout","原因1:用户调用close函数关闭套接口.
原因2:TCP收到对端传来的复位报文(RST报文).
原因3:TCP重传超时.
原因4:TCP保活探测失败.
","SOCKET/6/SOCKNOTEXIST","1.
正常运行信息,无需处理.
""SOCKNOTEXIST","ASYNACCEPTFAIL","Thecurrentsocketdidnotexist.
(TaskName=[STRING],Socket=[STRING],ProtocolName=[STRING])","6","当前socket不存在.
","TaskName:任务名.
Socket:socket号.
ProtocolName:协议号.
","在系统中无查法找到套接口控制块.
","SOCKET/6/SUBQUEINFO","1.
正常运行信息,无需处理.
""SUBQUEINFO","ASYNACCEPTFAIL","Theverboseinformationaboutthecurrentsubqueuewasdisplayed.
(Fullat:[ULONG]:[ULONG]:[ULONG](Hour:Minute:Seconds),Readyat:[ULONG]:[ULONG]:[ULONG](Hour:Minute:Seconds),CurrentState=[STRING],Numberofrefusedconnections=[ULONG])","6","当前连接子队列详细信息.
","Fullat:TCP侦听套接口子队列被填满的时间.
格式为时:分:秒.
Readyat:TCP侦听套接口子队列被填满后又重新准备好的时间.
格式为时:分:秒.
CurrentState:当前状态.
具体情况如下·full·readyNumberofrefusedconnections:服务器拒绝连接数.
","因某种原因导致套接口被关闭,记录被关闭TCP侦听套接口的子队列情况.
","SOCKET/4/TCP_AUTH_FAILED","1.
正常运行信息,无需处理.
""TCP_AUTH_FAILED","ASYNACCEPTFAIL","TCPauthenticationfailed.
(AuthenticationType=[STRING],Cause=[STRING],SourceAddress=[IPADDR],SourcePort=[USHORT],ForeignAddress=[IPADDR],ForeignPort=[USHORT],Protocol=[STRING],VpnInstanceName=[STRING])","4","上层应用协议为TCP连接配置了MD5或者Keychain认证密码,TCP在建立连接时认证MD5或者Keychain失败.
","AuthenticationType:认证方式,包括MD5和Keychain两种Cause:认证失败的原因SourceAddress:源地址SourcePort:源端口号ForeignAddress:目的地址ForeignPort:目的端口号Protocol:上层应用协议,如BFD、LDP等VpnInstanceName:VPN实例名称","原因1:两端未配置相同的认证方式.
不允许一段配置MD5认证,另一端配置Keychain认证.
原因2:两端配置的MD5未使用相同的认证密码.
原因3:两端配置的Keychain未使用相同的加密算法和密码.
","1.
参考具体上层应用协议配置MD5或者Keychain的配置要求和步骤,检查是否存在配置问题.
","SOCKET/6/TCPASYNQUEINFO""TCPASYNQUEINFO","ASYNACCEPTFAIL","TheverboseinformationabouttheasynchronousqueueofthecurrentTCPsocketwasdisplayed.
(Read=[ULONG],Write=[ULONG],Connect=[ULONG],Close=[ULONG],PeerClose=[ULONG],Accept=[ULONG],KeepAliveDown=[ULONG],Fullat:[ULONG]:[ULONG]:[ULONG](Hour:Minute:Second),LostMessage=[ULONG],MessageType=[ULONG])","6","当前TCPsocket异步队列详细信息.
","Read:Read消息个数.
Write:Write消息个数.
Connect:Connect消息个数.
Close:Close消息个数.
PeerClose:Peerclose消息个数.
Accept:Accept消息个数.
KeepAliveDown:Keepalivedown消息个数.
Fullat:此异步消息队列被填满的时间.
格式为时:分:秒.
LostMessage:丢失消息个数MessageType:被丢弃消息的类型.
具体情况如下1.
Read.
2.
Write.
3.
Connect.
4.
Close.
5.
Accept.
6.
PeerClose.
7.
KeepAliveDown.
","SOCKET/6/TCPCONNBLK","SOCKET/6/SOCKNOTEXIST","1.
正常运行信息,无需处理.
""TCPCONNBLK","ASYNACCEPTFAIL","ThecurrentTCPconnectionwasblockedat[ULONG]:[ULONG]:[ULONG](Hour:Minute:Second)","6","当前TCP连接被阻塞.
","blockedat:TCP连接或断连操作被阻塞的时间.
格式为时:分:秒.
","SOCKET/6/TCPIOSTAT","SOCKET/6/SOCKNOTEXIST","1.
正常运行信息,无需处理.
""TCPIOSTAT","ASYNACCEPTFAIL","ThestatisticofthepacketssentandreceivedthroughthecurrentTCPconnectionwasdisplayed.
(Input=[ULONG],ReceivedPackets=[ULONG],SentPackets=[ULONG])","6","当前TCP连接输入/输出统计.
","Input:套接口收到的所有TCP报文数量(TCP控制报文和数据报文的总数).
ReceivedPackets:套接口收到的TCP数据报文的数量.
SentPackets:输出的TCP报文数量.
","SOCKET/6/TCPOUTPUT_PROTECT","SOCKET/6/SOCKNOTEXIST","1.
正常运行信息,无需处理.
""TCPOUTPUT_PROTECT","ASYNACCEPTFAIL","Thesocketdatastructwasdestroyedintcpoutputprocess.
(TaskName=[STRING],SocketId=[ULONG],ErrorCode=[LONG]).
","6","Socket数据结构在TCP发包流程中被破坏.
","TaskName:任务名.
SocketId:套接口ID.
ErrorCode:错误码(–101,–22).
","原因Socket数据结构在TCP发包流程中被破坏.
","SOCKET/6/TCPWNDCLOSE","CFM/4/RST_CFG""TCPWNDCLOSE","ASYNACCEPTFAIL","ThepeerclosedtheTCPreceivalwindow,namely,thesizeofthepeer'sreceivalwindowwaszeroandthelocalendcouldnotsenddata.
(Startedat[ULONG]:[ULONG]:[ULONG](Hour:Minute:Second),Totaltimesofclosingthewindow=[ULONG])","6","对端关闭TCP接收窗口,即对端接收窗口等于0,本端无法再发送数据.
","Startedat:TCP连接的另一端曾经通告自己的接收窗口为0(不可用),最近一次通告发生的时间.
格式为时:分:秒.
Totaltimesofclosingthewindow:对端通告接收窗口不可用的次数.
","SOCKET/6/VRBSRIPSOCKINFO","SOCKET/6/SOCKNOTEXIST","1.
正常运行信息,无需处理.
""VRBSRIPSOCKINFO","ASYNACCEPTFAIL","TheverboseinformationaboutthecurrentRawIPsocketwasdisplayed.
(SocketPair:[STRING],ProtocolNumber=[ULONG])","6","当前原始套接口详细信息.
","SocketPair:Rawip地址信息.
ProtocolNumber:Rawip协议号.
","套接口被关闭,记录被关闭RawIP套接口当前状态、本地地址、远端地址.
","SOCKET/6/VRBSSOCKINFO","1.
正常运行信息,无需处理.
""VRBSSOCKINFO","ASYNACCEPTFAIL","Theverboseinformationaboutthecurrentsocketwasdisplayed.
(Task=[STRING]([ULONG]),Socket=[ULONG]([STRING]),ProtocolNumber=[ULONG])","6","当前socket详细信息.
","Task:任务.
包括任务名和任务号.
Socket:套用接口号和套接口协议类型.
具体情况如下·RAWLINK·RAWIP·TCP·UDPProtocolNumber:传输层协议号,取值范围是1~255.
","SOCKET/6/VRBSTCPSOCKINFO","SOCKET/6/SOCKNOTEXIST","1.
正常运行信息,无需处理.
""VRBSTCPSOCKINFO","ASYNACCEPTFAIL","TheverboseinformationaboutthecurrentTCPsocketwasdisplayed.
(State=[STRING],SocketPair:[STRING])","6","当前TCPsocket详细信息.
","State:TCP状态.
具体情况如下1.
Closed2.
Listening3.
Syn_Sent4.
Syn_Rcvd5.
Established6.
Close_Wait7.
Fin_Wait18.
Closing9.
Last_Ack10.
Fin_Wait211.
Time_WaitSocketPair:套接口对,即TCP四元组.
","SOCKET/6/VRBSUDPSOCKINFO","SOCKET/6/SOCKNOTEXIST","1.
正常运行信息,无需处理.
""VRBSUDPSOCKINFO","ASYNACCEPTFAIL","TheverboseinformationaboutthecurrentUDPsocketwasdisplayed.
(SocketPair:[STRING])","6","当前UDPsocket详细信息.
","SocketPair:套接口对,即UDP四元组.
","套接口被关闭,记录被关闭UDP套接口当前状态、本地地址、本端端口号、远端地址、远端端口号.
","SRM/0/REBOOT","1.
正常运行信息,无需处理.
""SRM","0","Theuserchose[Y/N]whendecidingwhethertorebootthesystem.
(Task=[STRING],Ip=[STRING],VpnName=[STRING],User=[STRING])","Thesystemwillreboot.
(Reason=[STRING])","系统将重新启动.
","[STRING]:系统重启的原因.
","日志中包括数业务发生异常、进程心跳丢失、环回心跳丢失、进程重启次数超过限制或者其他未知错误致使系统重启.
","1.
如果频繁重启,请联系华为工程师.
","SRM/2/VOLT_LOWER""VOLT_LOWER","0","The"[STRING1]"voltageofsensoron[STRING2]fellbelowthelower[STRING3]limit.
(SensorNum=[ULONG],Value=[STRING4],UpperThreshold=[STRING5],LowerThreshold=[STRING6])","2","电压传感器监控到电压低于下限值.
","[STRING1]:电压传感器名称.
[STRING2]:实体名称.
[STRING3]:告警级别.
[ULONG]:传感器编号.
[STRING4]:电压的当前值.
[STRING5]:告警的电压上限值.
[STRING6]:告警的电压下限值.
","单板电压异常.
","1.
请收集告警信息、日志信息和配置信息,联系华为工程师进行处理.
电压过低是指当前电压低于正常工作情况下的合理范围.
","SRM/2/VOLT_UPPER""VOLT_UPPER","0","The"[STRING1]"voltageofsensoron[STRING2]exceedstheupper[STRING3]limit.
(SensorNum=[ULONG],Value=[STRING4],UpperThreshold=[STRING5],LowerThreshold=[STRING6])","2","电压传感器监控到电压超过上限值.
","电压异常.
","单板电压异常.
","1.
请收集告警信息、日志信息和配置信息,联系华为工程师进行处理.
电压过高是指当前电压高于正常工作情况下的合理范围.
","SRM/3/BOARD_ABSENT""BOARD_ABSENT","0","[STRING]isabsent.
","3","单板不在位.
","[STRING]:单板名称.
","单板被拔出.
","1.
确认是否出于正常维护需要进行的操作,如更换电源模块或风扇框.
·Y=>3·N=>22.
建议插入电源模块或风扇框.
3.
结束.
","SRM/3/BOARD_PRESENT""BOARD_PRESENT","0","[STRING]ispresent.
","3","单板在位.
","单板被插入.
","单板被拔出.
","SRM/3/BRDRST","1.
正常运行信息,无需处理.
""BRDRST","0","Board[slot-id]reset,thereasonis:[reason].
","3","设备重新启动.
","slot-id:MPU槽位号.
reason:重新启动的原因.
·BoardresetbyOSPFforagingLSAerror:因为时钟故障等原因,设备频繁对全网所有设备的LSA(OSPF)发起清除,设备主动发起重新启动,避免网络震荡.
·BoardresetbyISISforpurgingLSPerror:因为时钟故障等原因,设备频繁对全网所有设备的LSP(IS-IS)发起清除,设备主动发起重新启动,避免网络震荡.
","参考reason参数含义.
","1.
如果频繁重启,请联系技术支持工程师.
","SRM/3/CARDCOUNTLIMIT""CARDCOUNTLIMIT","0","Slot[slot-id]ispoweredoffbecausethenumberofresetcountsexceedtheupperlimit.
(UpperLimit=[number])","3","插卡重启次数超限被下电.
","slot-id:插卡所在的槽位号.
number:最大复位次数.
","1.
检查插卡是否未插紧导致背板网口不通.
·是=>插紧插卡.
·否=>2.
2.
复位插卡,多次复位后仍未正常注册,请联系技术支持工程师.
","slot-id:插卡所在的槽位号.
number:最大复位次数.
","SRM/3/CARDLOSHEARTBEATRESET""CARDLOSHEARTBEATRESET","0","Card[slot-id]isresetduetoheartbeatloss.
","3","插卡心跳超时复位.
","slot-id:插卡所在的槽位号.
","插卡心跳丢失.
","1.
插卡心跳丢失持续30秒后插卡会自动重启,如重启后告警消失,则无需处理.
2.
如果插卡自动重启后仍出现此告警,请联系技术支持工程师.
","SRM/3/CARDONOFFSTARTTIMEOUT""CARDONOFFSTARTTIMEOUT","0","Card[slot-id]ispoweredonagain,becausethenumberofresetcountsreachestheupperlimit.
(UpperLimit=[number])","3","插卡启动超过复位次数门限而被上下电.
","插卡注册超时.
","1.
检查插卡是否未插紧导致背板网口不通.
·是=>插紧插卡.
·否=>2.
2.
复位插卡,多次复位后仍未正常注册,请联系技术支持工程师.
","1.
请检查插卡是否插紧.
·是=>请联系技术支持工程师.
·否=>插紧插卡.
","SRM/3/CARDSTARTUPTIMEOUT""CARDSTARTUPTIMEOUT","0","Card[slot-id]isresetbecausethestartuptimeexceedstheupperlimit.
","3","插卡注册超时被重启.
","1.
请检查插卡是否插紧.
·是=>请联系技术支持工程师.
·否=>插紧插卡.
","插卡心跳丢失.
","1.
请检查插卡是否插紧.
·是=>请联系技术支持工程师.
·否=>插紧插卡.
","SRM/4/CARDPOWEROFF""CARDPOWEROFF","0","Card[slot-id]ispoweredoff.
","4","业务引擎板SPUB下电.
","slot-id:业务引擎板SPUB所在的槽位号.
","执行命令poweroffslotslot-id,使SPUB板下电.
","SRM/4/CARDPOWERON","1.
正常运行信息,无需处理.
""CARDPOWERON","0","Card[slot-id]ispoweredon.
","4","业务引擎板SPUB上电.
","执行命令poweronslotslot-id,使SPUB板上电.
","执行命令poweroffslotslot-id,使SPUB板下电.
","SRM/4/CARDREGISTER","1.
正常运行信息,无需处理.
""CARDREGISTER","0","Registeringcard[slot-id]succeeded.
","4","插卡向主控板注册成功.
","插卡向主控板主动注册.
","插卡心跳丢失.
","1.
执行命令displaydevice,查看插卡是否注册成功.
·是=>结束.
·否=>请联系技术支持工程师.
","SRM/4/CARDREGISTERSTART""CARDREGISTERSTART","0","Card[slot-id]startregister.
","4","插卡开始注册.
","SRM/4/CARDRESET","插卡心跳丢失.
","SRM/4/CARDRESET","1.
正常运行信息,无需处理.
""CARDRESET","0","Card[slot-id]isreset.
","4","业务引擎板SPUB复位.
","执行命令resetslotslot-id,使SPUB板复位.
","执行命令poweroffslotslot-id,使SPUB板下电.
","SRM/4/FAN_ABSENT","1.
正常运行信息,无需处理.
""FAN_ABSENT","0","风扇不在位.
","4","单板不在位.
","[STRING]:风扇区域编号.
","风扇区域编号内所有风扇故障.
","1.
确认设备的风扇框是否可以插拔.
·Y=>2·N=>32.
关闭设备电源,拔出风扇框,清理风扇框上的灰尘后,将风扇框重新插入设备.
开机启动完毕后,执行命令displaydevice查看风扇状态是否为Normal状态.
·Y=>4·N=>33.
请收集告警信息、日志信息和配置信息,联系华为工程师进行处理.
4.
结束.
","SRM/4/FAN_ABSENT_RESUME""FAN_ABSENT_RESUME","0","风扇在位.
","4","单板在位.
","风扇区域编号内至少有一个风扇恢复正常.
","风扇区域编号内所有风扇故障.