手提电脑设置手机连接手提电脑无线上网（Set up mobile phone connection, laptop computer, wireless internet access）

设置手机连接手提电脑无线上网Set upmobile phone connection,laptop computer, wireless internet access

How to set up mobile phone connections, laptop computers,wireless internet access

Ocean News, 2006, 09, 13: Liang Hongju, author of Guangzhoudaily

Host Liang Hongju

Q: I heard that using mobile phones to connect laptops to theInternet, how to operate?

Answer: two methods, one is data line connection, and the otheris infrared connection.

Data line connection

Data line connection is more traditional, can be subdividedinto COM connection line, USB connection line two kinds, as longas the notebook computer has COM port or USB port, and have thecorresponding connection line. At present, only Motorola' smobile phone is

Through the USB interface connection, most of the mobile phonesare connected by the COM interface. The mobile phone thatprovides this interface basically provides the driver of GPRS,Modem, for, Win9X/2000/XP, and can refer to the officialwebsite of the corresponding handset manufacturer.

Infrared connection

Infrared connection is much more complicated, and using GPRSmobile phone + laptop, wireless Internet program is a bit likebuilt-in Modem installation. We must first install infraredinterface, driver, and virtual COM reflection to the infraredinterface, of course it is not directly through the wiredtelephone number line dialing, but through mobile phonewireless dial, the specific configuration is as follows (usingXP as an example) :

First install infrared interface driver, if the notebookcomputer BIOS configuration in configuration options forinfrared interface, first need to enable infrared function,press the F2 key to enter the BIOS setup boot, chose to enterthe SystemDevices menu and select the Infrares Port (infrared)option, this option has three optional, i. e. Disabled, Enabledand Auto, can be free to choose one of the two Enabled "and"Auto "option, press the F10 button to store the set value, theend of program. When you restart the system, the system willfind new infrared ports, install the driver, and then pop upthe Wizard dialog for adding new hardware, where you want toadd a new modem.

In the add new hardware wizard, click the next button, and thenback up the prompt box in the add new hardware wizard. Selectthe last add new hardware device option in the list box.Click "next" button, select "install shown I manually selectfrom a list of hardware in the pop-up dialog box (Senior) radio,and then click" next "button, select" modem "option in the

dialog box.

Continuing to click the next button, in the dialog box shown,select "do not checkmymodem, and I will select" from the list.Click "next" button to pop up a dialog box, choose a connectedCOM, choose a unused COM port, the computer will usuallyidentify themselves (which is actually a virtual COM port) , andfollow the prompts to continue, click"next"button to completethe virtual the modem is installed.

In the "network connection" dialog "network task" column click"create a new connection" connection, and then in the newconnection wizard prompted to create a new dial-up connection,select the virtual modem installed above.

In control panel, double-click "infrared" in the "options",select "enable infrared communication, laptop computer andmobile phone to open the infrared ports; infrared port settingson a mobile phone (different mobile phone settings are not thes ame) .

The infrared port mobile phone facing the infrared window ofnotebook computer (usually not more than the distance betweenthe 30cm is valid) , after the alignment of notebook computerwill be prompted to find an infrared transmitting device (i. e.mobile phone) , then double-click the front to create a dial-upconnection, enter dialing ISP phone number, user account andpassword information. After successful dial-up, the mobilephone screen shows the received and sent data, confirmed thatthe phone is being carried out data communications. (Demi)